General behaviors based on hydraulic characteristics of natural streams and channels have been recently analyzed and developed via various numerical models. However in the states of natural hydraulics, an experimental research must be performed simultaneously with the mathematical analysis due to effects of hydraulic properties such as meander, sediment, and so on. In this study based on 2-D advection-dispersion equation, flow and tracer experiments were performed in the S-curved meandering laboratory channel with a rectangular cross-section. The channel was equipped with instrument carriages which was equipped with an auto-traversing system to be used with velocity measuring sensors throughout the depth and breadth of the flow field. To measure concentration distribution of the salt solution was adjusted to that of the flume water by adding methanol and a red dye (KMnO4) was added to aid the visualization of the tracer cloud, the tracer was instantaneously injected into the flow as a full-depth vertical line source by the instantaneous injector and the initial concentration of the tracer was 100,000 mg/l. The secondary current as well as the primary flow pattern was analyzed to investigate the flow distribution in the meandering channels. The velocity distribution of the primary flow for all cases skewed toward the inner bank at the first bend, and was almost symmetric at the crossovers, and then shifted toward the inner bank again at the next alternating bend. Thus, one can clearly notice that the maximum velocity occurs taking the shortest course along the channel, irrespective of the flow conditions. The result of the tracer tests shows that pollutant clouds are spreading following the maximum velocity lines in each cases with various mixing patterns like superposition, separation, and stagnation of pollutant clouds. Flow characteristics in each cases performed in this study can be compared with tracer dispersion characteristics with using evaluation of longitudinal and transverse dispersion coefficients(LDC, TDC). As expected, LDC and TDC in meandering parts have been evaluated with increasing distribution and straight parts have effected to evaluate minimum of LDC and TDC due to symmetric flow patterns and attenuations of secondary flow.
After parturition, woman in childbed's health can grow worse. Because when woman in childbed gives birth, Genital organ can be damaged, and lost a lot of blood, and also consume a lot of physical strengths. So, after parturition, woman in childbed is easy to fall in disease if do not take care in health specially. So after parturition, woman in childbed should be careful in stress, sleep, food etc. This thesis described Postpartum Spasm[痙病], Oppressive Feeling and Dizziness[鬱冒], Constipation[便秘], Abdominal Pain[腹痛], Diarrhea[下利], Annoyance[煩亂] and Vomitting Sickness[嘔逆]. Postpartum Spasm[痙病]'s major symptom is rigided body. This disease corresponds to Tetanus in modem medicine, and bacterial infection is assumed for cause. By Oriental medicine, after parturition, when blood is lacking, if patient takes wind, this disease breaks out. Oppressive Feeling and Dizziness[鬱冒]'s major symptom is dizzy head and gloomy eye. After parturition, when blood is lacking, if patient sweats too much and take cold, this disease breaks out. After parturition, if patient consumes a lot of resins of human body, Constipation[使秘] breaks out. There are four causes to Abdominal pain[腹痛]. First, due to deficiency and cold treats by Danggwisaenggangyangyuktang(當歸牛薑羊肉湯). Second, due to stagnation of Gi(氣) treats by Jisiljakyaksan(枳實芍藥散). Third, due to blood stasis treats by Ha-eohyeoltang(下瘀血湯). Fourth, due to lochiorrhea treats by Daeseunggitang(大承氣湯). After parturition, Annoyance[煩亂] and Vomitting Sickness[嘔逆] due to fever of difficiency treat by Jukpidaehwan(竹皮大丸). After parturition, Febrile diarrhea[熱性下利] treats by Baekduonggagamchoagyotang(白頭翁加甘草阿膠湯). This disease is similar with present Bacillary Dysentery. After parturition, Exteroceptive disease due to taking wind treats by Yangdaltang. Due to wind and fever treats by Jukyeoptang(竹葉湯).
Objectives : Blood stasis (BS) is related to be caused by blood circulation and stagnation which are cancer, atherosclerosis and hyperlipidemia in traditional medicine. We extracted 3 kinds of BS formula; Seogakjihwang-tang (SGT), Tonggyuhawlhyul-tang (THT), Hyulbuchukeo-tang (HCT). This study was conducted to investigate whether the 3 kinds of herbal formula extracts have inhibitory efficacy association with anti-adipogenesis. Methods : To investigate the anti-adipogenesis, we used the mouse fibroblast cell line, 3T3-L1 which differentiated into adipocytes in response to insulin, IBMX and dexamethasone (MDI). Cytotoxicity of herbal formula extracts were examined by CCK-8 kit. Intracellular lipid droplets were detected by Oil-Red-O staining. Triglyceride (TG) and leptin were measure using elisa kit. Results : The yield of water extracts was 14.62% (SGT), 21.27% (THT), 20.02% (HCT). Lipid accumulation was reduced significantly by 3 kinds of herbal formula compared to control. Especially, THT and HCT decreased lipid droplet, respectively at all concentration. The TG and leptin were also inhibited by 3 kinds of herbal formula. The IC50 of TG were $280.51{\mu}g/m{\ell}$ (SGT), $52.62{\mu}g/m{\ell}$ (THT), $313.99{\mu}g/m{\ell}$ (HCT). The IC50 of leptin were $348.76{\mu}g/m{\ell}$ (SGT), $164.02{\mu}g/m{\ell}$ (THT), $257.00{\mu}g/m{\ell}$ (HCT). THT was better than other herbal formula on anti-adipogenesis. Conclusion : kinds of herbal formula inhibited adipogenesis in MDI-induced 3T3-L1 adipocytes, as indicated by the significant reduction in TG and leptin concentration without cytotoxicity. Therefore, 3 kinds of herbal formula for BS might act as a therapeutic agent for preventing lipid diseases, such as obesity and atherosclerosis.
Objectives : To broaden understanding of "Shanghanlun", this paper analyzes and interprets its Post-formula instructions(方後注文). Methods : From the contents of Post-formula instructions that follow formulas in "Shanghanlun", the effects, administration instructions, decocting methods are examined specifically. Based on annotators's interpretations, the author provides his understanding. Conclusions & Results : The treatment principle of sweat inducive formulas is 'to induce subtle sweating(微似汗)'. Meanwhile, in the case of Inner water and fluid retention(水飮內停), 'sweating(汗出)' is expressive of healing. Among the emetic formulas in the "Shanghanlun", the meaning of 'vomiting(得吐者)' in the descriptions of Zhizichitang(梔子豉湯), is that the stagnated heat in the chest area has been relieved, letting the Qi communicate upwards. In terms of formula administration, besides the usual 2~3 times a day method, there is '頓服法' for immediate effects; three times within six hours application method in cases where the exterior symptoms are extremely severe or the stagnation of exterior pathogen is severe; 6 times a day or continuous application day and night regardless of frequency. In terms of decocting methods, there is '再煎法' to have the formula's effects not be biased or too strong; the decocting method of Dahuanghuanglianxiexīntang where the formula is brewed momentarily in order to cool the immaterial pathogenic heat. Moreover, when there is disease in the chest, Dahuang is brewed first to soften its effects. When there is disease in the abdomen area, Dahuang is added later to quicken its effects. In the case of Guizhirenshentang, to maximize the effect of Guizhi, it was suggested that Guizhi is added later.
서양사회는 중세를 '암흑시대'로 폄하해 왔다. 그러나 중세 천년을 주도한 이슬람이 종이와 제지술, 아랍 번역본을 서양에 전파하지 않았다면 희랍 라틴어 번역과 전수, 구텐베르크 인쇄술, 종교개혁, 르네상스는 태동할 수 없었다. 그들은 고대 지식문명 파괴자가 아니라 복원과 부활의 주역이었다. 그 거점이 무슬림 공동체로 회자되는 모스크와 이슬람 도서관(지혜의 집)이다. 이에 본 연구는 중세 이슬람 왕조의 성립과 아라비아 반도, 아프리카, 이베리아 반도를 지배하는 과정에서 등장한 이슬람 도서관을 추적했다. 이를 위하여 왕실이 주도한 칼리프 도서관, 모스크에 병설된 공공도서관, 재상과 학자 등이 설립한 개인도서관으로 대별한 후 중세 이슬람 도시인 다마스쿠스, 메카, 바그다드, 알레포, 코르도바, 카이로, 페스, 튀니스 등의 주요 도서관 흔적을 중심으로 역사와 발전, 역할과 기능, 인류문명에 미친 영향과 중요성, 침체와 쇠퇴 등을 분석했다.
본 연구에서는 초음속 비행체의 조파저항을 감소시키기 위하여, 최대 주파수 80 kHz의 반복 레이저 펄스에 의해 야기된 에너지 부가법에 관한 실험적 연구가 수행된다. 기류 마하수 1.94의 흡입식 초음속 풍동의 바깥에 설치된 초점렌즈에 의하여 레이저 펄스가 실린더 모델 전단부에 집약된다. 시간변동 항력과 정체압력은 로드셀과 PCB 압력센서에 의해서 측정되며, 동시에 고속 카메라를 이용하여 가시화가 수행된다. 본 연구의 결과로부터, 레이저 펄스 에너지 부가에 의한 항력 저감량은 레이저 펄스 주파수가 증가할 때, 최대 21%까지 거의 선형적으로 증가하였다. 부가 에너지 효율은 레이저 펄스 에너지에만 의존하는 결과를 얻었으며, 최대 1000%까지 달성되었다.
In these days the industrial management are characterized by mass production. Mass production which is not possible without the rationalization in the process of production and the efficient scale of management needs development of technical administration. The object of this study is set up on the rationalization in the process of production. And this rationalization is a means to the aim of industrial management. So as to realize the rationalization in the process of production, we should think on plan of production and the line of balancing in processes of work. The line of balancing is considered as one of very valuable administration methods. The line of balancing that controls capacities and loads so that processes of work might balance in each other makes away with happenings of idleness and stagnation during the process of work As a natural consequence it follows (1) shortening in the period of Production, (2) more efficient, (3) removing the lots of tine and matter, (4) more efficient using in elements for production. Therefore, through the labour productivity and the efficiency of the process of production increased by these effects, the line of balancing was intended to curtail the basic cost. Though the previously said line of balancing could be applied to production, it should not be said that we can completely balance in each lines of work. In other words it is impossible that the line of balancing is completely executed in every lines of work. For that reason, we should arrange the level of balancing in lines. Nowaday, in our country, it is true that the line of balancing is hardly executed at manufacturing industries. Therefore if we execute and apply the line of balancing to manufacturing industries and the larger field as well , we could curtail the basic cost, through which we could reinforce not only the international competative power but increase the labour productivity. As a result, by these effects, we would rationalize the industrial management.
Objective We researched to analyze correlation between menstrual pain and Korean medical diagnosis - Sasang constitution and Pattern Identification - through clinical research of the patients of menstrual pain. Method Trial gruop who consists of women with menstrual pain is 193 people, and control group who consists of women without menstrual pain is 101 people. We producted analyzing of their Sasang Constitution and symptom with Diagnosis System of Oriental Medicine(DSOM). This study used chi-square test, two sample t-test, analysis of variance, Wilcoxon's rank sum test, Kruskal-Wallis test, correlation analysis. Results 1) In trial and control group, Soeumin was the largest and Soyangin was the least. There was'nt statistical significance between trial and control group. 2) In DSOM, deficiency of blood, stagnation of qi, blood stasis, coolness, spleen, kidney and phlegm pathogenic factors showed significant difference. Conclusion There were significant corelation between menstrual pain and Korean mdical diagnosis - Sasang constitution and Pattern Identification.
Injection molding is used in many industrial fields such as home appliances, vehicle parts, and electronic device parts because various resins can be molded, leading to mass production of complex shapes. Generally, the empirical prediction method is used to set the initial processing conditions of injection molding. However, this approach requires a lot of cost and its presented solution is not accurate. In this paper, injection molding was simulated through the MoldflowTM in order to manufacture the spacer for gas insulated switch. Through the simulation, the flow of the resin with respect to the diameter of the inlet was analyzed. It was found that the process was possible at a higher resin temperature as the diameter of the inlet increased. In addition, through thermal analysis during injection of the resin, it was confirmed that a stagnation phenomenon occurred at the insert portion during injection molding, and the temperature of the resin was higher than that of the mold. As in this paper, if the spacer is manufactured by optimizing the injection hole and the temperature of the injection process based on simulation, it is expected that the spacer can be manufactured with high productivity.
Objectives: This study was conducted to comprehend the syndrome differentiations of dysmenorrhea and find out their clinical symptoms, tongue images and pulse patterns by analyzing previous studies. Methods: The following researches were collected by searching the medical journals published from November, 2007 to October, 2017, from KISS, OASIS, CNKI. : researches on the syndrome differentiation of dysmenorrhea, researches on the criteria of diagnosis of syndrome differentiation of dysmenorrhea, randomized controlled trials (RCT) used syndrome differentiation for treating dysmenorrhea. Results: By investigating the frequency of syndrome differentiations used in RCT studies, the frequent ones were chosen. They were qi stagnation and blood stasis (氣滯血瘀), qi-blood deficiency (氣血虛弱), congealing cold with blood stasis (寒凝血瘀), liver-kidney depletion (肝腎虧損), blood stasis with dampness-heat (濕熱瘀阻). Conclusion: 4 syndrome differentiations were frequently used in RCT studies. And the frequency of clinical symptoms on each syndrome differentiations from each RCT study was analyzed and compared. Clinical symptoms chosen as chief symptoms in more than one reference, appeared in more than half of the references, most frequent tongue images and pulse conditions were organized. The most frequent clinical symptoms included the period and pattern of pain, the accompanying symptoms of whole-body and the pattern of menstrual bleeding.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.