• 한국정밀공학회지
• /
• 제21권11호
• /
• pp.140-148
• /
• 2004

Tight integration of product design and process planning in the early design stage would make bigger impact as wider spectrum of design and manufacturing alternatives can be pursued and evaluated. Thus the development of systematic computer-based supporting for this integration if desirable. For this integration and process planning in the early design stage, the systematic method to synthesize shape of part from functional requirements is crucial. This research presents the methods of functional decomposition from overall function of product and synthesizing shape of part based on functional relations extracted from functional decomposition using planetary gear transmission system as an example.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1095-1101
• /
• 1995

Numerical analysis of vertical solidification process allowing solid-liquid density change is performed by a hybrid method between a winite volume method (FVM) and a finite element method (FEM). The investigation focuses on the influence of solid-liquid density change and cooling rates on the motion of solid-liquid interface, solidified mass fraction, temperatures and thermal stresses in the solid region. Due to the density change of pure aluminium, solid-liquid interface moves more slowly but the solidified mass fraction is larger. The cooling rate of the wall is shown to have a significant influence on the phase change heat transfer and thermal stresses, while the density change has a small influence on the motion of the interface, solidified mass fraction, temperature distributions and thermal stresses. As the cooling rate increases, the thermal stresses become higher at the early stage of a solidification process, but it has small influence on the final stresses as the steady state is reached.

• International Journal of Computer Science & Network Security
• /
• 제22권1호
• /
• pp.319-323
• /
• 2022

The information research system continues to be developed and directed at leading research National Institute of Technology (ITN) Malang in accordance with the Research Strategic Plan of ITN Malang. One of them is a computer system in a complete integrated facility management activity, such as this research scheme. The purpose of this research is to combine and integrate people, places, product, processes and technology. All of them are integrate existing organizational factors into a more effective, simplifying of complex processes, identifying and scheduling, notes, decision makers and more. This research was conducted in stages by design with a structured model stage for 3 (three) years (focus on humans, products and processes), research on Integration Facility Management: Interface Coordination in human resources and product management have been completed on 2019 and 2020. While the focus of research this year is to obtain an integrated facility management Interface Coordination in Process Management.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.92-92
• /
• 2009

• Carbon letters
• /
• 제13권1호
• /
• pp.1-16
• /
• 2012

The near explosion of attention given to graphene has attracted many to its research field. As new studies and findings about graphene synthesis, properties, electronic quality control, and possible applications simultaneous burgeon in the scientific community, it is quite hard to grasp the breadth of graphene history. At this stage, graphene's many fascinating qualities have been amply reported and its potential for various electronic applications are increasing, pulling in ever more newcomers to the field of graphene. Thus it has become important as a community to have an equal understanding of how this material was discovered, why it is stirring up the scientific community and what sort of progress has been made and for what purposes. Since the first discovery, the hype has expediently led to near accomplishment of industrial-sized production of graphene. This review covers the progress and development of synthesis and transfer techniques with an emphasis on the most recent technique of chemical vapor deposition, and explores the potential applications of graphene that are made possible with the improved synthesis and transfer.

• 산업공학
• /
• 제12권2호
• /
• pp.319-328
• /
• 1999

Today, offshore design field is concerned with system integration such as CIM(Computer Integrated Manufacturing), PDMS(Product Data Management System) and EDMS(Engineering Data Management System) in order to cope with the change of engineering specification as owner's requirements during construction stage of the project. This paper deals with the case study that describes about the efficient interface between material control system and 3D CAD system to support the design process in offshore industry using design rules involved the designer's knowledge. In this paper, we constructed an information system, called knowledge-based CAD interface systems, which is composed material code management system and 3D specification generator which automatically creates 3D catalogue anti specification by linking the material code, called short code, and the specification components of the 3D CAD system. As a result of the construction, it is possible to maintain consistency of the design process, and through reduction of the design processing time and improvement of the design process, competitiveness is improved.

• 치과방사선
• /
• 제17권1호
• /
• pp.27-49
• /
• 1987

Using ³H-proline as a radioactive tracer, the relationship between the ultrastructural differentiation and the site of protein synthesis has been investigated in developing red blood corpuscles. The general ultra-structure of erythropoietic cells in differentiation after 60 minutes of in vitro labeling has confirmed the results from previous investigations by Bessis, M., Thiery, J. and others. In dividing nuclei more than two-thirds of the labeling were present at the interface between heterochromatin and euchromatin. In less differentiated cells most of the grains in interphase cells was localized over the nucleus. As the cells continued to develope beyond a stage where cytoplasmic density was clearly increased over other cell lines in bone marrow, the majority of grains localized over the cytoplasmic area was decreased in more mature cells, as judged by the density of cytoplasm, and the structural changes in mitochondria, Golgi complex and polysomal configurations. These results show; 1) that the cytoplasm of erythroblast series does not change under in vitro conditions employed in the study; 2) that protein synthesis in the nucleus occurs largely at the interface between euchromatin and heterochromatin in active nuclei; and 3) that cytoplasmic synthesis of proteins continues to take place well into the normoblast stage solong as the physically visible polysomes are present in maturing red blood corpuscles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.309-312
• /
• 2002

Precision stage is essential device for semiconductor equipments, fiber optic assembly systems and micro machines. In this paper, we develop a piezo-electric inchworm type actuator for long stroke ultra precision linear stages, and implement a controller to interface with commercial motion controllers. It provides fast implementation of precise position control system substituting for rotary motor. In the future, using a laser interferometer as a position sensor, we plan to implement a nano meter precision stage.

• 한국동물생명공학회지
• /
• 제37권4호
• /
• pp.255-265
• /
• 2022

The cellular communication network factor (CCN) family proteins regulate many biological events such as angiogenesis, tumor growth, placentation, implantation, and embryogenesis. The expression and function of CCN1, CCN2, and CCN3 at the maternal-conceptus interface are established in humans and rodents, but little is known about the role of CCN4 to CCN6 in the reproductive organs in any other species. Several studies in transcriptome analysis in pigs have shown that the expression of CCN4 and CCN6 increases in the endometrium during early pregnancy. However, their expression, regulation, and function in the endometrium throughout the estrous cycle and pregnancy have not been fully understood in pigs. Thus, we determined the expression, localization, and regulation of CCN4 and CCN6 during the estrous cycle and at the maternal-conceptus interface in pigs. We found that the levels of CCN4, but not CCN6, changed during the estrous cycle. The levels of CCN4 were greater during mid- to late pregnancy than in the early stage, and the levels of CCN6 were greatest on Day 15 of pregnancy. CCN4 and CCN6 were detected in conceptus tissues during early pregnancy and in chorioallantoic tissues during the later stage of pregnancy. CCN4 mRNA was mainly localized to epithelial cells, CCN6 mRNAs to epithelial and stromal cells in the endometrium. In endometrial explant cultures, CCN4 expression was increased by progesterone, and CCN6 expression by interferon-𝛾. These results suggest that CCN4 and CCN6 may play roles in the establishment and maintenance of pregnancy by regulating the endometrial epithelial cell functions in pigs.

• Steel and Composite Structures
• /
• 제48권1호
• /
• pp.59-71
• /
• 2023

Corrosion of the headed studs shear connectors is an important factor in the reduction of the durability and mechanical properties of the steel-concrete composite structure. In order to study the effect of stud corrosion on the mechanical properties in the negative moment region of steel-concrete composite beams, the corrosion of stud was carried out by accelerating corrosion method with constant current. Static monotonic loading was adopted to evaluate the cracking load, interface slip, mid-span deflection, and ultimate bearing capacity of four composite beams with varying corrosion rates of headed studs. The effect of stud corrosion on the stiffness of the composite beam's hogging moment zone during normal service stage was thoroughly examined. The results indicate that the cracking load decreased by 50% as the corrosion rate of headed studs increase to 10%. Meanwhile, due to the increase of interface slip and mid-span deflection, the bending stiffness dropped significantly with the same load. In comparison to uncorroded specimens, the secant stiffness of specimens with 0.5 times ultimate load was reduced by 25.9%. However, corrosion of shear studs had no obvious effect on ultimate bending capacity. Based on the experimental results and the theory of steel-concrete interface slip, a method was developed to calculate the bending stiffness in the negative bending moment region of composite beams during normal service stage while taking corrosion of headed studs into account. The validity of the calculation method was demonstrated by data analysis.