• Applied Microscopy
• /
• 제41권1호
• /
• pp.55-60
• /
• 2011

부엽성 개구리밥은 엽상체, 연결사, 뿌리로 이루어진 축소된 수생식물로 엽상체는 특정한 시기에 물속에 가라앉는 휴면구조인 잠아를 형성한다. 식물세포의 분화발달에서 중요한 기능을 수행하는 색소체는 개구리밥의 거의 모든 기관에 분포하며, 특히 잠아 형성 및 수중 침강에 있어서 이들 색소체와의 연계성이 보고되어 있다. 본 연구에서는 개구리밥 식물체 내 모든 조직을 구성하는 각각의 세포들을 대상으로 색소체 특성에 초점을 두어 전자현미경으로 연구하였다. 생장 중의 엽상체는 활발한 분열로 개체를 계속 증식시키고, 특정 시기에 잠아원기를 형성하여 엽상체-잠아원기-잠아-엽상체원기-엽상체의 분화과정을 반복한다. 개구리밥 조직에 발달하는 색소체는 전색소체, 엽록체, 전분체로 크게 대별되며, 특히 색소체의 크기, 틸라코이드막계, 녹말입자 형성 등은 엽상체와 잠아 조직 간에 뚜렷한 차이를 보인다. 엽상체 및 잠아원기 엽육세포에는 비교적 작은 전색소체가 세포질에 분산되어 다수 분포하고, 기질 내에는 틸라코이드막계 및 녹말입자가 거의 형성되지 않는다. 반면, 생장 중의 엽상체에는 엽록체들이 중앙의 큰 액포를 따라 위치하고, 기질에는 그라나를 형성하는 틸라코이드막계가 발달한다. 유사한 형태의 엽록체가 근관에 발달하나 뿌리의 피층 및 연결사 색소체에는 녹말입자는 거의 나타나지 않는다. 잠아원기와는 대조적으로 잠아조직에는 매우 큰 전분체들이 축적된다. 이들 전분체는 기질에 내부 막의 분화 없이 당 축적에 의한 거대 녹말입자를 형성하여 무거운 구조가 된다. 이와 같이 엽상체, 연결사, 뿌리조직에 형성된 엽록체로 광합성을 수행하여 생장발달에 필요한 에너지를 생성 활용하는 반면, 잠아는 에너지 생성이나 활용이 아닌 휴면상태 유지에 필요한 독특한 구조로 각각 발달한다. 축소된 개구리밥 식물체 내 색소체 및 각각의 세포와 조직들은 최소한의 구조로 분화되나 기능은 고도로 분업화된 독특한 수생식물이라 할 수 있다.

• Journal of Radiation Protection and Research
• /
• 제31권1호
• /
• pp.37-46
• /
• 2006

본 연구에서는 심지층처분장에서 사용될 사용후핵연료 처분용기 개발을 위한 첫 시도로서 핵임계 및 방사선 안전성과 열역학적 구조안정성 관점에서 만족하는 처분용기 크기를 도출하였으며, 처분용기 구성요소의 적절한 배열과 안전한 처분조건 등을 설정하기 위한 기본정보도 수록하였다. 처분용기에 주어지는 외압에 대한 음력해석을 위한 안전계수를 2.0으로 하였을 때, 13cm의 사잇거리를 갖는 사용후핵연료 저장통을 둘러싸고 있는 내부충전물의 직경은 112cm로 평가되었으며, 저장통과 용기외부의 가장 얇은 부분의 최소두께는 15cm로 결정되었다. 이러한 크기를 갖는 처분용기는 가압경수로 사용후핵연료 집합체 4개 또는 중수로형 사용후핵연료는 297다발을 수용할 수 있는 것으로 평가되었다. 그러나 향후 처분작업의 방사선적 안전성 확보를 위하여 용기의 상하단 부위에 대한 상세 방사선차폐해석이 필요하다.

• Carbon letters
• /
• 제11권4호
• /
• pp.279-284
• /
• 2010

Graphene is one of the most promising materials for many applications. It can be used in a variety of applications not only as a reinforcement material for polymer to obtain a combination of desirable mechanical, electrical, thermal, and barrier properties in the resulting nanocomposite but also as a component in energy storage, fuel cells, solar cells, sensors, and batteries. Recent research at Michigan State University has shown that it is possible to exfoliate natural graphite into graphite nanoplatelets composed entirely of stacks of graphene. The size of the platelets can be controlled from less than 10 nm in thickness and diameters of any size from sub-micron to 15 microns or greater. In this study we have investigated the influence of melt compounding processing on the physical properties of a polyamide 6 (PA6) nanocomposite reinforced with exfoliated graphite nanoplatelets (xGnP). The morphology, electrical conductivity, and mechanical properties of xGnP-PA6 nanocomposite were characterized with electrical microscopy, X-ray diffraction, AC impedance, and mechanical properties. It was found that counter rotation (CNR) twins crew processed xGnP/PA6 nanocomposite had similar mechanical properties with co-rotation (CoR) twin screw processed or with CoR conducted with a screw design modified for nanoparticles (MCoR). Microscopy showed that the CNR processed nanocomposite had better xGnP dispersion than the (CoR) twin screw processed and modified screw (MCoR) processed ones. It was also found that the CNR processed nanocomposite at a given xGnP content showed the lowest graphite X-ray diffraction peak at $26.5^{\circ}$ indicating better xGnP dispersion in the nanocomposite. In addition, it was also found that the electrical conductivity of the CNR processed 12 wt.% xGnP-PA6 nanocomposite is more than ten times higher than the CoR and MCoR processed ones. These results indicate that better dispersion of an xGnP-PA6 nanocomposite is attainable in CNR twins crew processing than conventional CoR processing.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.293-294
• /
• 2011

It is known that semiconductor quantum-dot (QD) heterostructures have superior zero-dimensional quantum confinement, and they have been successfully applied to semiconductor laser diodes (QDLDs) for optical communication and infrared photodetectors (QDIPs) for thermal images [1]. The self-assembled QDs are normally formed at Stranski-Krastanov (S-K) growth mode utilizing the accumulated strain due to lattice-mismatch existing at heterointerfaces between QDs and cap layers. In order to increase the areal density and the number of stacks of QDs, recently, sub-monolayer (SML)-thick QDs (SQDs) with reduced strain were tried by equivalent thicknesses thinner than a wetting layer (WL) existing in conventional QDs (CQDs) by S-K mode. Despite that it is very different from CQDs with a well-defined WL, the SQD structure has been successfully applied to QDIP[2]. In this study, optical characteristics are investigated by using photoluminescence (PL) spectra taken from self-assembled InAs/GaAs QDs whose coverage are changing from submonolayer to a few monolayers. The QD structures were grown by using molecular beam epitaxy (MBE) on semi-insulating GaAs (100) substrates, and formed at a substrate temperature of 480$^{\circ}C$ followed by covering GaAs cap layer at 590$^{\circ}C$. We prepared six 10-period-stacked QD samples with different InAs coverages and thicknesses of GaAs spacer layers. In the QD coverage below WL thickness (~1.7 ML), the majority of SQDs with no WL coexisted with a small amount of CQDs with a WL, and multi-peak spectra changed to a single peak profile. A transition from SQDs to CQDs was found before and after a WL formation, and the sublevel of SQDs peaking at (1.32${\pm}$0.1) eV was much closer to the GaAs bandedge than that of CQDs (~1.2 eV). These revealed that QDs with no WL could be formed by near-ML coverage in InAs/GaAs system, and single-mode SQDs could be achieved by 1.5 ML just below WL that a strain field was entirely uniform.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.169-169
• /
• 2008

To keep pace with scaling trends of CMOS technologies, high-k metal oxides are to be introduced. Due to their high permittivity, high-k materials can achieve the required capacitance with stacks of higher physical thickness to reduce the leakage current through the scaled gate oxide, which make it become much more promising materials to instead of $SiO_2$. As further studying on high-k, an understanding of the relation between the etch characteristics of high-k dielectric materials and plasma properties is required for the low damaged removal process to match standard processing procedure. There are some reports on the dry etching of different high-k materials in ICP and ECR plasma with various plasma parameters, such as different gas combinations ($Cl_2$, $Cl_2/BCl_3$, $Cl_2$/Ar, $SF_6$/Ar, and $CH_4/H_2$/Ar etc). Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. The choice of $BCl_3$ as the chemically active gas results from the fact that it is widely used for the etching o the materials covered by the native oxides due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. In this study, the surface reactions and the etch rate of $Al_2O_3$ films in $BCl_3/Cl_2$/Ar plasma were investigated in an inductively coupled plasma(ICP) reactor in terms of the gas mixing ratio, RF power, DC bias and chamber pressure. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by AFM and SEM. The chemical states of film was investigated using X-ray photoelectron spectroscopy (XPS), which confirmed the existence of nonvolatile etch byproducts.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 공동학술대회
• /
• pp.475-486
• /
• 2009

목도의 지질조사가 한국 역사상 이번에 처음으로 수행되었다. 목도가 중생대 말기 약$7,000{\sim}8,000$만년 전에 성층화산으로 분출하여 화산원형이 개석됨으로서 현재는 Planeze 단계를 지나 골격단계에 이른 것으로 밝혀졌다. 추후에 정밀조사를 한다면 분화구 자리도 찾아질 수 있을 것이다. 목도에는 50m고도에 해성단구면이 있다. 이는 제4단구면에 대비되고 홍적세 후기에 생성된 것으로 추정된다. 목도의 해안에 발달한 해안의 미지형으로는 해안단구, 해식애, 해식동, 파식대, 해안석주, 낭식장, 타포니(풍화혈) 등이 발견되었다. 목도는 산경도(山徑圖)에 표시되어 있는 낙동정맥의 남방 연장선 위 몰운대 앞바다에 위치하며 "물에 뜬 거북이"형국(부해금귀형(浮海金龜形)) 혹은 "물에서 나오고 있는 거북이"형국(출수금귀형(出水金龜形))이다. 목도의 도서명은 그 정체성을 위하여 "유구도"(游龜島) "남구도"(南龜島) "회구도"(廻龜島)중에서 선택하여 개칭할 필요가 있다. 목도는 부산의 관광수요를 위한 새로운 관광명소로 발전, 개발되는데 필요한 관광자연배경을 충분히 가지고 있으며, 앞으로 이 무인도서가 분산의 등대섬, 그리고 유,무인도서라 연계하여 해양관광을 개발한다면 새로운 관광지로서 행양수도발전에 지대한 영향력을 가질 수 있다고 평가되었다. 목도의 주변해역에 해양수족관과 해초정원을 조성하고 수목원을 조성하며 기타 해양문화공간조성의 종합기본계획이 이 연구에서 완성되었다.

• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.182-187
• /
• 2011

In this paper, PBTI characteristics of NMOSFETs with La incorporated HfSiON and HfON are compared in detail. The charge trapping model shows that threshold voltage shift (${\Delta}V_{\mathrm{T}}$) of NMOSFETs with HfLaON is greater than that of HfLaSiON. PBTI lifetime of HfLaSiON is also greater than that of HfLaON by about 2~3 orders of magnitude. Therefore, high charge trapping rate of HfLaON can be explained by higher trap density than HfLaSiON. The different de-trapping behavior under recovery stress can be explained by the stable energy for U-trap model, which is related to trap energy level at zero electric field in high-k dielectric. The trap energy level of two devices at zero electric field, which is extracted using Frenkel-poole emission model, is 1,658 eV for HfLaSiON and 1,730 eV for HfLaON, respectively. Moreover, the optical phonon energy of HfLaON extracted from the thermally activated gate current is greater than that of HfLaSiON.

• 한국진공학회지
• /
• 제20권6호
• /
• pp.442-448
• /
• 2011

자발형성법으로 InP (001) 기판에 성장한 InAs/InAlGaAs 양자점(QDs, quantum dots)의 광학적 특성을 PL (photoluminescence)과 TRPL (time-resolved PL)을 이용하여 분석하였다. InAs 양자점 시료는 single layer InAs/InAlGaAs QDs (QD1)과 7-stacked InAs/InAlGaAs QDs (QD2)를 사용하였다. 저온(10 K)에서 QD1과 QD2 모두 1,320 nm에서 PL 피크가 나타났으며, 온도를 300 K까지 증가하였을 때 각각 178 nm와 264 nm의 적색편이(red-shift)를 보였다. QD1의 PL 소멸시간은 PL 피크인 1,320 nm에서 1.49 ns이고, PL 피크를 중심으로 장파장과 단파장으로 이동하면서 점차 짧아졌다. 그러나 QD2의 PL 소멸시간은 발광파장이 1,130 nm에서 1,600 nm까지 증가할 때 1.83 ns에서 1.22 ns로 점진적으로 짧아졌다. 이러한 QD2의 PL과 TRPL 결과는 평균 양자점의 크기가 InAs/InAlGaAs 층이 증가함에 따라 점차 증가하기 때문으로 single layer인 QD1에 비해 양자점 크기의 변화가 더 크기 때문으로 설명된다.

• 한국식생활문화학회지
• /
• 제11권4호
• /
• pp.439-454
• /
• 1996

The present study investigated Bul-Chun-Wi Sacrificial Ritual (sacrificial service which has been handed down from generation to generation to worship the family ancestors in the period of $1400{\sim}1800$) and foods for the sacrificial service among fourteen head families in Andong area. The findings are as follows; 1. In Bul-Chun-Wi Sacrificial Rituals, family shrine has been maintained in good shape, and the table, dishes, and foods used in the rituals have not been changed so much until these days. 2. While vegetable soup is widely used as soup, one family uses the seaweed soup, the other soup mixed with meat, fish, and vegetable. Specially soybean-powdered soup, which is the distinguishable food in Andong area, has been used. 3. As a basic Ddock, mainly Si-Ru-Ddock(a steamed rice cake), piled up to 13-15 stacks, is used. Additional 7-9 kinds of Ddock are placed on top of the basic Ddock. 4. For grilled-meat food(Geuck), eight families use the raw meat, and one family uses the half-cooked meat. Recently, five families have used the cooked meat. Mostly used ones are meat-Geuck, fish-Geuck, chicken-Geuck, and the Geuck are not served one by one. Instead the Geuck are stacked in one dish designed for Geuck in order of meats from poultry, animal, fish, and shell. As the sub-dishes for rice, raw and cooked Geuck are used. 5. The number of stew (Tang) are 3 to 6 and 5 stews is the most popular. Commonly used stews are meat stew, fish stew, chicken stew, vegetable stew, blood stew, and organs stew. For the vegetable stew, buckwheat gel can be used. 6. As the fruit, chinese date, pear, nut and dried persimmons are the basic ones. The even number of 6 or 8 colorful fruits are used, while the odd number of 7 or 9 colorful fruits are used in three head families. 7. As Sik-Hae which is a drink and made from fermented rice, rice Sik-Hae or fish Sik-Hae has been necessarily used. 8. As raw meat dish, the liver of cow or meat is used. As a wrapping materials, the reticulum of a ruminant, green seaweed or thinly fried egg can be used.

• 방사선산업학회지
• /
• 제12권4호
• /
• pp.325-332
• /
• 2018

Carotid angiography covering the aortic arch includes contrast-enhanced magnetic resonance angiography (CEA), which is applied to a large region and usually employs contrast media. However, the use of contrast media can be dangerous in infants, pregnant women, and patients with chronic renal failure (CRF). Follow-up patients informed of a lesion may also want to avoid constant exposure to contrast media. We aimed to apply time-of-flight (TOF) angiography to a large region and compare its usefulness with that of CEA. Ten patients (mean age, 58 years; range, 45~75 years) who visited our hospital for magnetic resonance angiography (MRA) participated in this study. A 3.0 Tesla Achieva magnetic resonance imaging (MRI) system (Philips, Netherland) and the SENSE NeuroVascular 16-channel coil were employed for both methods. Both methods were applied simultaneously to the same patient. Three TOF stacks were connected to cover the aortic arch through the circle of Willis, and CEA was applied in the same manner. For the quantitative assessment, the acquired images were used to set the regions of interest (ROIs) in the common carotid artery (CCA) bifurcation, internal carotid artery, external carotid artery, middle cerebral artery, and vertebral artery, and to obtain the signal-to-noise ratio (SNR) and the contrast-to-noise ratio (CNR) for the soft tissues. Three radiologists and one radiological resident performed the qualitative assessment on a 5-point scale - 1 point, "very bad"; 2 points, "bad"; 3 points, "average"; 4 points, "good"; and 5 points, "very good" - with regard to 4 items: (1) sharpness, (2) distortion, (3) vein contamination, and (4) expression of peripheral vessels. For the quantitative assessment, we estimated the mean SNR and CNR in each of the 5 ROIs. In general, the mean SNR was higher in TOF angiography (166.1, 205.2, 154.39, 172.23, and 161.95) than in CEA(92.05, 95.43, 84.76, 73.69, and 88.3). Both methods had a similar mean CNR: 67.62, 106.71, 55.9, 73.74, and 63.46 for TOF angiography, and 67.82, 71.19, 60.52, 49.45, and 64.07 for CEA. In all ROIs, the mean SNR was statistically significant (p<0.05), whereas the mean CNR was insignificant (p>0.05). The mean values of TOF angiography and CEA for each item in the qualitative assessment were 4.2 and 4.28, respectively for item 1; 2.93 and 4.55, respectively, for item 2; 4.6 and 3.13, respectively, for item 3; and 2.88 and 4.65, respectively, for item 4. Therefore, TOF angiography had a higher mean for item 3, and CEA had a higher mean for items 2 and 4; there was no significant difference between the two methods for item 1. The results for item 1 were statistically insignificant (p>0.05), whereas the results for items 2~4 were statistically significant (p<0.05). Both methods have advantages and disadvantages and they complement each other. However, CEA is usually applied to a large region covering the aortic arch. Time-of-flight angiography may be useful for people such as infants, pregnant women, CRF patients, and followup patients for whom the use of contrast media can be dangerous or unnecessary, depending on the circumstance.