• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.67-75
• /
• 2002

A study to investigate the influence of combustion chamber shape, especially piston top face configuration, on the combustion stability is presented with CFD analysis and single cylinder GDI engine test. Initial configuration of the piston bowl was designed with CFD analysis and further parametric studies of the design factors on the piston top face were carried out through the single cylinder GDI engine test. It was found that both the geometry of piston top face and the compression ratio have great influences on the combustion stability. Of interest is that the design factors of the GDI piston to prevent mixture diffusion out of the piston bowl have important roles for the stable combustion at the stratified mixture condition. Also the relationship between spray impingement and flow pattern in a GDI piston bowl should be considered to design an optimal bowl configuration for stable stratified combustion.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.767-772
• /
• 2002

Using the diffusion cell, a experimental study on the nitrogen permeability was performed with the various thickness of concrete. This is important with relating to the carbonation study because the study of $CO_2$ diffusivity needs to use thin concrete specimen. Experimental results show that the nitrogen permeability is few affected by concrete specimen's thickness. But, specimens with 1cm thickness have a high permeability and deviation relatively. Also, specimens with w/c ratio 0.40 have a low permeability than 0.58. Consequently, the 3cm thickness is the better stable than others but the 1cm thickness specimens will be stable in case having a lot of specimens.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.60-64
• /
• 2001

Recent recovery of the Korean economy drives a rapid increase in utility consumption and requires more stable utility supply and maintenance. However, power location security hardship, reinforcement of international environmental regulation and a huge cost of power plant construction have increased the burden laid on the stable supply. In addition, an efficient and flexible load management is required more than any era since an increment of the rate of increase in cooling load is expected. Therefore, according as the necessity of direct load control for cooling load during the summer in Korea was on the rise, direct load control systems by Internet communication method are constructed at five commercial buildings. Based on practical load control, this study proposes various application modes and communication methods prior to extension diffusion of direct load control hereafter.

• Journal of the Korean Society of Safety
• /
• v.13 no.3
• /
• pp.112-118
• /
• 1998

This work has been carried out to study the mixing characteristics of solid in vibrating feeder for stable operations of fluidized bed combustion. The system consisted of two particles such that fine particles were located on the top of the coarse particles before vibratory mixing had started. Effect of particle size, particle densities, vibration amplitude and vibration frequency were experimentally obtained. Also, a diffusion model was applied in interpreting the experimental results. From these results, the following empirical equation for the diffusivity was obtained. $0.87{(\frac{d_c}{d_f})}^{0.73}\;{(\frac{\rho_f}{\rho_c})}^{0.53}(A^2f)$.

• Journal of the Korean Vacuum Society
• /
• v.18 no.3
• /
• pp.203-207
• /
• 2009

Copper is known as a replacement for aluminum wire which is used for semiconductor. Because specific resistance of Cu ($1.67{\mu}{\Omega}$-cm) is lower than that of Al ($2.66{\mu}{\Omega}$-cm), Cu reduce RC delay time. Although melting point of Cu($1085^{\circ}C$) is higher than melting point of Al, Cu have characteristic to easily react with Silicon(Si) in low temperature, and it isn't good at adhesive strength with Si. For above these reason, research of diffusion barrier to prevent reaction between Cu and Si and to raise adhesive strength is steadily advanced. Our study group have researched on W-C-N (tungsten-carbon-nitrogen) Diffusion barrier for preventing diffusion of Cu through semiconductor. By recent studies, It's reported that W-C-N diffusion barrier can even precent Cu and Si diffusing effectively at high temperature. In this treatise, we vaporized different proportion of N into diffusion barrier to research Cu's Electromigration based on the results and studied surface hardness in the heat process using nano scale indentation system. We gain that diffusion barrier containing nitrogen is more stable for Cu's electromigration and has stronger surface hardness in heat treatment process.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.511-525
• /
• 2014

Goal of this study is estimating of validity of calculated vertical diffusion coefficient for Masan bay is semi-enclosed bay by using eco-hydrodynamic model that is used to analysis of physical structure of coastal waters and calculates the vertical diffusion coefficient. physical structure of coastal waters is calculated by EFDC model, vertical diffusion coefficient calculated as the density gradient is bigger, the vertical diffusion coefficient as density gradient is increases, the vertical diffusion coefficient is decreased. Validity of vertical diffusion coefficient estimated by reproducibility of concentration of dissolved oxygen that calculated in ecosystem model is constructed by Stella program. The Results of model in 2008~2009 were $R^2$ value of 2008 is 0.529~0.700 and $R^2$ value is 0.542~0.791. This results were similar to observed data and simulated to hypoxia at that time. The 'vertical diffusion coefficient' represents stratification and physical stable of a water body, and will be useful for prediction of Hypoxia outbreak.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.2
• /
• pp.383-389
• /
• 2017

This paper devotes to the study of a diffusive model for unstirred membrane reactors with maintenance energy subject to a homogeneous Neumann boundary condition. It shows that the unique constant steady state is globally asymptotically stable when it exists. This result further implies the non-existence of the non-uniform steady state solution.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.113-115
• /
• 1998

This paper presents the indirect boundary integral equation method(BIEM) to analyze 3D moving conductor problem. Instead of an artificial upwind algothm, the proposed method uses a fundamental Green's function which is a particular solution of diffusion equation. Therefore, this method yields a stable and accurate solution regardless of the Peclet number. The indirect BIEM is compared with 3D upwind FEM for a numerical model which has analytic solutions.

• Journal of the Chungcheong Mathematical Society
• /
• v.36 no.1
• /
• pp.39-53
• /
• 2023

In this paper, we consider a delayed ratio-dependent predator-prey reaction-diffusion system with homogenous Neumann boundary conditions. We study the existence of nonnegative solutions and the stability of the nonnegative equilibria to the system. In particular, we provide a sufficient condition for the positive equilibrium to be globally asymptotically stable.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.5
• /
• pp.1300-1307
• /
• 1995

The effect of thermal stratification on the turbulent dispersion from a fine cylindrical heat source was experimentally examined in a wind tunnel with and without a strong temperature gradient. A 0.5 mm dia. nichrome wire was used as a line heat source. Turbulent intensities, r.m.s. value of temperature and convective heat fluxes were measured by using a hot-wire and cold-wire combination probe. The results show that the peack value and the spread of the vertical turbulent intensity for the stratified case are far lower than those in the neutral case, which indicates that the stable temperature gradient suppresses the vertical velocity component. All of the third order moments including heat fluxes measured in the stable condition have very small values than those of the neutral case. This nature suggests that the decrease of scalar fluctuations in the stably stratified flow is mainly due to the suppression ofthe turbulent diffusion processes by the stable stratification. A simple gradient model with a composite timescale which has a simple weighted algebraic mean between dynamic and thermal time scale yields reasonably good numerical values in comparison with the experimental data.