• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.149-157
• /
• 2018

Recently, because Korean government's 3020 renewable energy policy is implemented, renewable energy sources are connected in the power system. The power quality of the Korean power system has been maintained at the highest level in the world, but it will become difficult to maintain the highest level of power quality as the proportion of renewable energy source, which is characterized by severe output fluctuation and difficult control, increases. For those reasons, this paper analyzed Key technologies for stabilization of power system.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.4
• /
• pp.78-86
• /
• 2002

In this paper, LMI (Linear Matrix Inequality) based on H$\_$$\infty$/ controller for a lire of sight (LOS) stabilization system. It shows that the proposed controller has more excellent stabilization performance than that of the conventional PI-Lead controller. An H$\_$$\infty$/ control has been also applied to the system for reducing modeling errors and the settling time of the system. The LMI-based H$\_$$\infty$/ controller design is more practical in view of reducing a run-time than Riccati-based H$\_$$\infty$/ controller. This H$\_$$\infty$/ controller is available not only to decrease the gain in PI-Lead control, but also to compensate the identifications for the various uncertain parameters. Therefore, this paper, shows that the proposed LMI-based H$\_$$\infty$/ controller had good disturbance attenuation and reference input tracking performance compared with the control performance of the conventional controller under any real disturbances.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.875-879
• /
• 1998

A fault on the transmission line results in the variation of reactance and parametric uncertainties in the power system dynamics. In this case, we need a robust control to cope with these uncertainties. A sliding mode control, a sort of robust control, is known to be robust to parametric or state-dependent uncertainties if the bounding function of uncertain terms is determined a priori. However, in general, we can not readily determine the bounding function for the complex systems. Hence, in this paper we introduce a fuzzy system which can estimate the bounding function in relatively simple way. By the use of the proposed fuzzy system, determination of bounding function is made easier. We applied the proposed scheme to the stabilization of power system under the sudden fault on the transmission lines. The simulation result verifies the effectiveness of the scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.207-210
• /
• 1997

In this paper, a hierarchical fuzzy controller for stabilization of the inverted pendulum system is proposed. The facility of this hierarchical fuzzy controller which has a swing-up control mode and a stabilization one, moves a pendulum in an initial natural stable equilibrium point and a cart in arbitrary position to an unstable equilibrium point and a center of rail. Specially, the virtual equilibrium point (.PHI.$_{VEq}$ ) which describes functionally considers the interactive dynamics between a position of cart and a angle of inverted pendulum is introduced. And comparing with the convention optimal controller, the proposed hierarchical fuzzy inference made substantially the inverted pendulum system robust and stable.e.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.7
• /
• pp.72-78
• /
• 2008

The line-of-sight(LOS) stabilization system is a precision electro-mechanical gimbals assembly for suppressing vibration due to its environment and tracking the target in a desired direction. This paper describes the design of gimbals system to reject the disturbance and to improve stabilization. The controller consists of a DSP with transducer and actuator interfaces. Unknown parameters of the gimbals are estimated by the signal compression method. The cross-correlation coefficient between the impulse response from the assumed model and the one from model of the gimbals is used to obtain the better estimation. The quasi-impulse response through linear element included in the gimbals could be obtained by the signal compression method. The unknown parameter of the linear element could be estimated as comparing the bode plots for impulse response from gimbals with them from model's response.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.127-136
• /
• 2017

This paper investigates improved stability and stabilization criteria for sampled-data control systems. By using a suitable and newly constructed augmented Lyapunov-Krasovskii functional and some recent mathematic techniques such as auxiliary function-based integral inequalities, sufficient conditions for stability and stabilization conditions are derived within the framework of linear matrix inequalities(LMI) form. The superiority and validity of the proposed results are illustrated by three numerical examples.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.4
• /
• pp.340-346
• /
• 2008

An unmanned surveillance robot consists of a machine gun, a laser receiver, a thermal imager, a color CCD camera, and a laser illuminator. It has two axis control systems for elevation and azimuth. Because the current robot system is mounded at a fixed post to take care of surveillance tasks, it is necessary to modify such a surveillance robot to be installed on an UGV (Unmanned Ground Vehicle) system in order to watch blind areas. Thus, it is required to have a stabilization system to compensate the disturbance from the UGV. In this paper, a simulation based design scheme has been adopted to develop a mobile surveillance robot. The 3D CAD geometry model has first been produced by using Pro-Engineer. The required pan and tilt motor capacities have been analyzed using ADAMS inverse dynamics analysis. A target tracking and stabilization control algorithm of the mobile surveillance robot has been developed in order to compensate the motion of the vehicle which will experience the rough terrain. To test the performance of the stabilization control system of the robot, ADAMS/simulink co-simulations has been carried out.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.8 s.251
• /
• pp.897-905
• /
• 2006

This study considers an experimental design of disturbance compensation control to improve stabilization performance of main battle tanks. An adaptive non-parametric design technique based on the Filtered-x Least Mean Square(FXLMS) algorithm is applied in the consideration of model uncertainties. The optimal compensator is designed by two-step design procedures: determination of frequency response function of the disturbance compensator which can cancel the disturbance of series of single harmonics by using the FXLMS algorithm and determination of the compensator polynomial which can fit the frequency response function obtained in the first step optimally by using a curve fitting technique. The disturbance compensator is applied to a simple experimental gun-torsion bar-motor system which simulates gun driving servo-system. Along with experimental results, the feasibility of the proposed technique is illustrated. Experimental results demonstrate that the proposed control reduces the standard deviation of stabilization error to 47.6% that by feedback control alone. The directional properties of the FXLMS Algorithm such as the direction of convergence and its convergence speed are also verified experimentally.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.7 no.2
• /
• pp.23-39
• /
• 2001

Dysfunction of the anterior and dorsal muscles of the trunk have been studied in relation to low back pain of many years. Many muscles of the trunk are capable of contributing to the stabilization and protection of the lumbar spine, recent evidence has suggested that transversus abdominis may be critically involved and has been the focus of rehabilitation. The delay in onset of contraction of trunk muscles associated with movement of the upper or lower limb in patients with low back pain indicates a significant deficit in the automatic motor command for control of disturbance to the spine. The function of transversus abdominis has been largely ignored in the evaluation of spinal stabilization and protection. The most essential stabilizing muscles for the lumbar column are the transversus abdominis and the multifidus. Sling exercise therapy(SET) concept consists of a system of diagnosis and treatment. The system of diagnosis involves testing the muscle's tolerance through progressive loading in open and close kinetic chains. The SET system contains elements such as relaxation, increasing the range of movement, traction, training the stabilizing musculature, sensorimotor exercises, training in open and close kinetic chains, dynamic training of the mobilizing musculature, cardiovasc+ular exercises, group exercise, personal exercise at home. Sensorimotor training is an essential element of the SET concept. The emphasis is on closed kinetic chain exercises on an unstable surface, thereby achieving optimum stimulation of the sensorimotor apparatus.

• Journal of the Korea Society for Simulation
• /
• v.18 no.2
• /
• pp.57-64
• /
• 2009

Stable and effective constraint enforcement system is one of the crucial components for physically-based dynamic simulations. This paper presents analysis and evaluation for traditional constraint enforcement systems(Lagrange Multiplier method, Baumgarte stabilization method, Post-stabilization method, Implicit constraint enforcement method, Fast projection method) to provide a guideline to users who need to integrate a suitable constraint enforcement system into their dynamic simulations. The mathematical formulations for traditional constraint enforcement systems are presented in this paper. This paper describes a summary of evaluation which consists of constraint error comparison, computational cost, and dynamic behavior analysis to verify the efficiency of each traditional constraint enforcement system.