• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.71-76
• /
• 2010

According to recent changes in industry for semiconductor devices, a low-temperature treatment has become a necessity. These changes relate to size refinement and the development of new materials. While variation in cooling efficiency does not affect the yield when using a high-temperature treatment, uniform cooling efficiency is necessary avoid "inconsistencies/bends" in low temperature treatments. However it is difficult to increase temperature stabilization in low temperature treatments. In this paper, using CFD (Computer Fluid Dynamics), we analyze and manipulate the design and input of the low-temperature system to attempt to control for temperature variations within the quartz tube, of which airflow appears to be a predominant factor. This simulation includes variable inputs such as airflow rate, head pressure, and design manipulations in the S.C.U. (Super Cooling Unit).

• Applied Science and Convergence Technology
• /
• v.23 no.1
• /
• pp.34-39
• /
• 2014

The programmable switches which control the delivery of electrical signals in programmable logic devices are fabricated using memory technology. Although phase change memory (PCM) technology is one of the most promising candidates for the manufacturing of the programmable switches, the threshold switching material should be added to a PCM cell for realization of the programmable switches based on PCM technology. In this work, we report the impurity-doped $Ge_2Sb_2Te_5$ (GST) chalcogenide alloy exhibiting threshold switching property. Unlike the GST thin film, the doped GST thin film prepared by the incorporation of In and P into GST is not crystallized even at the postannealing temperature higher than $200^{\circ}C$. This specific crystallization behavior in the doped GST thin film is attributed to the stabilization of the amorphous phase of GST by In and P doping.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1995.10b
• /
• pp.174-179
• /
• 1995

본 논문데서는 부하외란이나 시스템 내부 파라미터의 변동시에 적응력이 저하되는 종래의 PI제어기와, 정상상태 잔류편차가 존재하는 퍼지 제어기의 단점을 극복하기 위한 적 응 퍼지 제어 기법을 제안하였고, 이를 도립 진자 시스템에 적용하였다. 운송차의 위치 및 진자 각도의 오차, 오차의 변화량에 따라 퍼지 추론을 행하여 PI 제어기의 가중치를 결정하 는 구조로, P제어기는 운송차 및 진자의 오차가 과도 상태에서의 영역에서 사용되어 속응성 과 고정도의 특성을 얻는다. 1제어기는 정상상태에서의 정도 향상에 이용되었다. 특히, 제안 하는 적응 퍼지 제어기는 운송차의 위치 오차에 대한 PI 동작과, 진자의 각도 오차에 대한 PI 동작을 각각 퍼지 추론에 의해 부드럽게 전환함으로서 고유 불안정의 시스템인 도립 진 자 시스템의 안정화 제어에 적용하였다.

• Journal of the Korean Ceramic Society
• /
• v.29 no.8
• /
• pp.639-645
• /
• 1992

Effects of additives on electromagnetic properties of a Ni-Cu-Zn ferrite for a noise filter in high frequency regions were studied. Both resistivity and permeability were increased with the amount of Mn2O3 up to 1wt%, then decreased with further addition. Addition of Co2O3 decreased the permeability of the ferrite and shifted the resonance frequency to a higher frequency region, which was thought due to the stabilization of domain walls. Therefore it was possible to improve both the permeability and the loss and to control the cut-off frequency by the concurrent addition of Mn2O3 and Co2O3.

• Journal of the Korean Ceramic Society
• /
• v.48 no.5
• /
• pp.463-466
• /
• 2011

Wet foams formed through direct foaming were stabilized using various concentrations of amiphiphilic particles that could control pore size and porosity. These porous materials showed moderate strength upon compression with high porosity. Bubble size and wet foam stability were tailored by amphiphile concentration, particle concentration, contact angle, and pH of the suspension to obtain crack-free porous solid after sintering. Closed and open pores were obtained with sizes of 30~300 ${\mu}m$ and porosities of over 80%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6B
• /
• pp.1114-1119
• /
• 2000

In this paper, a current comparative frequency automatic tuning circuit for the CMOS bandpass filter are designed with the new architecture. And also, when the designed circuit is compared the typical tuning circuit, it has very simple architecture that is composed of the current comparator and charge pump and operated in 2V power supply. The proposed tuning circuit automatically compensate the difference between the operating current of the integrator and the reference current which is specified. Using CMOS 0.25um parameter, a CMOS bandpass active filter with center frequency(fo=100MHz) is designed, and according to the transister size the variation of the center frequency is simulated. As the HSPICE simulation results, the tuning operating of the proposed current comparative frequency automatic tuning circuit is verified.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.26-31
• /
• 2005

ITR(Inne. Tie Rod) is one of the core parts in an automobile steering system. The front wheels are connected to the steering system, which are controlled by steering wheel through the ITR. Improvement of assembling ITR is needed f3r drivers' satisfaction. Therefore, the parameters influencing the rotational torque were studied and analyzed. The useful results can be obtained, and could be applied to manufacture ITR. Through these manufacturing technologies, high quality ITR have been manufactured with high productivity.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.3
• /
• pp.67-73
• /
• 2002

This paper presents a sliding mode observer and Controller far the state estimation and the dynamic stabilization of the magnetic levitation systems. The proposed striding mode observer is constructed by means of Lyapunov stability theorem to decrease the observer error, and the sliding rode controller is designed by a linear combination of the equivalent and nonlinear control input for the estimated states. The feasibilities of the suggested design method are illustrated with the simulation results.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.134-135
• /
• 2012

This paper analyzes the characteristics of the power system of Jeju island in 2014, which has wind farms with the support of BESSs (Battery Energy Storage Systems). In the simulation, the electrical loads are predicted based on Korea Power Exchange's data and the wind turbines are considered with new installed plans within 2014. The situation that some wind farms are forced to disconnect from the grid instantaneously is considered. The BESSs are controlled by using SOC (State of Charge) and power smoothing control algorithm. The simulation results show the effectiveness of the proposed method.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.498-500
• /
• 2012

According to the climatic characteristics of the wind power output is difficult to predict and a severe strain due to a change in output has been very influential in the grid. Jeju Hangwon wind farm, many of the wind generator is installed in a wide area because it is not have this device that artificially Smoothing is needed. In addition, By the requirements of the power company active power supply / control and improve power system reliability and energy storage during the peak demand for electricity using the energy stored in the power supply is needed. In this paper, Unit 12 in Jeju Hangwon demonstrated 0.5MW PCS and energy storage system associated with the wind through the stabilization of output and the leveling of output and test results will be introduced.