• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.149-163
• /
• 2023

This paper presents stability evaluation of unlined tunnels with semi-circular arch and straight sides (SASS) driven in non-homogeneous and anisotropic undrained clay. Numerical analysis has been conducted based on lower bound finite element limit analysis with second order cone programming under plane strain condition. The solutions will be used for the assessment of stability of unlined semi-circular arch tunnels and tunnels in which semi-circular roof is supported over rectangular/square sections. The stability charts have been generated in terms of a non-dimensional factor considering linear variation in undrained anisotropic strength for normally consolidated and lightly over consolidated clay with depth, and constant undrained anisotropic strength for heavily over-consolidated clay across the depth. The effect of normalized surcharge pressure on ground surface, non-homogeneity and anisotropy of clay, tunnel cover to width ratio and height to width ratio of tunnel on the stability factor and associated zone of shear failure at yielding have been examined and discussed. The geometry of tunnel in terms of shape and size, and non-homogeneity and anisotropy in undrained strength of clay has been observed to influence significantly the stability of unlined SASS tunnels.

• Journal of ILASS-Korea
• /
• v.4 no.2
• /
• pp.47-52
• /
• 1999

The prediction of the critical Reynolds number in the stability curie of liquid jet was mainly analyzed by the empirical correlations and the experimental data through the literature. The factors affecting the critical Reynolds number include Ohnesorge number, nozzle length-diameter ratio, ambient pressure and nozzle inlet type. The nozzle inlet type was divided into two groups according to the dependence of the critical Reynolds number on the length-to-diameter ratio of nozzle. The empirical correlations for the critical Reynolds number as a function of above factors mentioned are newly proposed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.921-926
• /
• 2002

In this study, we investigate the plugging effect on the CE type steam generator tube. The natural frequency and mode shape will be changed due to decrease of the effective mass distribution along the tube. We compared the variation of stability ratio for plugged tube with that for unplugged one. The natural frequency increased because of removing the cooling water inside the steam generator tube, but the stability ratio decreased inversely because of changing the vibrational model shape. We also investigated the turbulent excitation effect.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.390.1-390
• /
• 2002

In this study, we investigate the plugging effect on the CE type steam generator tube. The natural frequency and mode shape will be changed due to decrease of the effective mass distribution along the tube. We compared the variation of stability ratio for plugged tube with that fur unplugged one. The natural frequency increased because of removing the cooling water inside the steam generator tube, but the stability ratio decreased inversely because of changing the vibrational mode shape. We also investigated the turbulent excitation effect.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.20 no.1
• /
• pp.52-63
• /
• 1994

It was investigated that the effects of surfactant to cosurfactant ratio on the stability and rheological properties of o/w microemulsion. The stability of microemulsion was good in the surfactant to cosurfactant ratio 20/40 - 30/30. In the point of rheological properties, a yield stress meande the inner structure formation was detected and the area of hysteresis loop was increased with increasing of surfactant content of the ratio. The microemulsion prepared by the Microfluidizer was characterized by rheopetic.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.12
• /
• pp.1296-1305
• /
• 2009

This paper has the object of investigating dynamic stability of stiffened tapered thick plate with concentrated mass on Pasternak foundation by means of finite element method and providing kinematic design data for mat of building structures. Finite element analysis of stiffened tapered thick plate is done by use of rectangular finite element with 8-nodes. In order to analysis plate which is supported on Pasternak foundation, the Winkler foundation parameter is varied with 10, 100, 1000 and the shear foundation parameter is 5, 10, concentrated mass is $0.25m_c$, $1.0m_c$, tapered ratio is 0.25, 0.5. The ratio of In-plane force to critical load is applied as $0.4\sigma_{cr},\;0.6\sigma_{cr},\;0.8\sigma_{cr}$ respectively. This paper analyzed varying tapered ratio.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.329-336
• /
• 2004

The lock-up position of the floating ring seal affects the leakage flowrate and the stability. And it is changed depending on the operating and geometry condition. In this paper, the leakage flowrate and stability with change of the height and length were investigated by theoretical analysis and experiment. The parameter of the height and length is expressed to the b and L. The decreasing of the b resulted in the increasing of equivalent whirl frequency ratio in the experimental result at the low speed and high pressure not such as theoretical analysis. As the L increased the leakage flowrate decreased and stiffness and direct damping coefficient increased in the experimental result. That was similar to the theoretical analysis.

• Journal of Aerospace System Engineering
• /
• v.2 no.2
• /
• pp.35-41
• /
• 2008

The structural stability for preliminary model of supersonic rocket which has large L/D ratio is investigated. Large L/D ratio can cause a critical problem on the structural stability by the increase of bending-moment. By using the ANSYS and the CFX codes, we inspected the structural stability for Ma=2 and angle of attack for $20^{\circ}$. The optimum number of bolts and their joints required on the rocket surface are predicted.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.127-132
• /
• 2007

This paper has the object of investigating dynamic stability of opening thick plates on Pasternak foundation by means of finite element method and providing Kinematic design data for mat of building structures. Finite element analysis of Tapered Thick plate is done by use of rectangular finite element with 8-nodes. In order to analysis plate which is supported on Pasternak foundation. the Winkler foundation parameter is varied with $10^2$, $10^3$ and the shear foundation parameter is 5, 10. The ratio of force to critical load is applied as 0.4, 0.6, respectively. This paper analyzed varying Tapered Ratio and Concentrated Mass.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.121-129
• /
• 2004

In this study, a slope stability chart for assessing stability of homogeneous simple soil slopes is proposed. Most existing slope stability charts are based on limit equilibrium method, which is not rigorous in mechanical standpoint. Meanwhile, limit analysis based on the principle of virtual work and the bound theorems of plasticity is suitable for evaluating the stability of geotechnical structures such as slope due to its simplicity in computation and mechanical rigor. Numerical limit analysis taking advantage of finite elements and linear programming can consider various slope conditions and, in addition, find the optimum stability solution with effeciency. In this study, a numerical limit analysis program in terms of effective stress is developed and a mechanically rigorous slope stability chart is proposed by performing stability analyses for various slope conditions. Pore pressure ratio, commonly used in stability charts, is applied to consider the effects of pore pressure for effective stress analysis. As a result of comparison between proposed stability chart and Spencer's stability chart, it was found that Spencer's chart solutions are biased to lower bound which means conservative in design.