• Journal of Magnetics
• /
• 제21권4호
• /
• pp.544-553
• /
• 2016

Torque ripple minimization without decrease in average torque is a vital attribute in the design of Synchronous Reluctance (SynRel) motor. As the design of SynRel motor is an arduous task, which encompasses many design variables, this work first analyses the significance of the effect of varying the geometrical parameters on average torque and torque ripple and then proposes an extensive optimization procedure to obtain configurations with improved average torque and minimized torque ripple. A hardware prototype is fabricated and tested. The Finite Element Analysis (FEA) software tool used for validating the test results is MagNet 7.6.0.8. Multi Objective Particle Swarm Optimization (MOPSO) is used to determine the various designs meeting the requirements of reduced torque ripple and improved torque performance. The results indicate the efficacy of the proposed methodology and substantiate the utilization of MOPSO as a significant tool for solving design problems related to SynRel motor.

• 마이크로전자및패키징학회지
• /
• 제6권4호
• /
• pp.9-14
• /
• 1999

본 논문에서는 고속 디지털 회로에서 발생하는 Simultaneous Switching Noise (SSN)를 감소하기 위한 다층 기판 구조를 제안하고 시간 영역 시간 차분법 (Finite Difference Time Domain Method)을 이용하여 그 효과를 확인하였다. 제안된 구조는 전원 평면과 접지 평면사이에 전도성 유전체를 전체 또는 부분적으로 삽입한 구조로 혼신 전압파의 크기를 각각 최대 85%, 55% 까지 줄일 수 있어 고속 고성능 디지털 시스템 구현에 효과적으로 적용될 수 있다.

• 한국자원식물학회지
• /
• 제30권4호
• /
• pp.335-342
• /
• 2017

본 연구에서는 LC IT TOF MS를 이용하여 조팝나무 뿌리의 열수 추출물과 메탄올 추출물을 분석하였다. 그 결과, 열수 추출물에서 caffeic acid와 p-coumaric acid가 주성분으로 검출되었으나, 메탄올 추출물에서는 열수 추출물에서 검출되지 않은 저극성 물질들이 다수 검출되었다. 조팝나무 메탄올 추출물의 항산화 및 항염증에 대한 연구는 보고된바가 있으나, 열수추출물에 대한 연구는 아직 미비한 실정이다. 따라서, 본 연구에서는 조팝나무 뿌리 열수 추출물(SSN)의 항산화활성 및 항염증 활성을 탐색하고자 하였다. 먼저 항염증 활성을 탐색하기 위해 lipopolysaccharide (LPS)에 의해 활성화된 대식세포로부터 분비되는 NO함량을 측정하였다. SSN은 LPS로 유도한 염증반응에서 세포 독성 없이 NO의 생성을 농도 의존적으로 억제하였다. 다음으로, 항산화활성을 측정하기 위해 DPPH, ABTS 라디칼 소거능과 SOD 유사활성을 측정한 결과 SSN은 강한 유리라디칼 저해능을 나타냈으며, 이는 SSN이 폴리페놀(56.7 mg/g)과 플라보노이드(15.1 mg/g)와 같은 생리활성 물질을 함유하고 있어 강한 항산화능을 가지는 것으로 사료된다. 또한, 대식세포에서 $H_2O_2$로 유도한 세포독성을 완화시켰으며, 세포내 ROS 생성을 억제함에 따라 천연물 유래 항산화제로서의 가치를 확인하였다. 이상의 결과를 종합해 볼때SSN이 항산화와 항염증 효과와 관련된 건강보조식품 및 기능성화장품 소재로의 활용이 가능할 것으로 사료된다.

• 한국환경과학회지
• /
• 제29권10호
• /
• pp.943-949
• /
• 2020

In this work, we prepared a heterojunction anode with a surface layer of SnO₂-Sb-Ni (SSN) on a Ti/IrO₂ electrode by thermal decomposition to improve the electrochemical activity of the Ti/IrO₂ electrode. The Ti/IrO₂-SSN electrode showed significantly improved electrochemical activity compared with Ti/IrO₂. For the 0.1 M NaCl and 0.1 M Na₂SO₄ electrolytes, the onset potential of the Ti/IrO₂-SSN electrode shifted in the positive direction by 0.1 V_SCE and 0.4 V_SCE, respectively. In 2.0-2.5 V voltages, the concentration in Ti/IrO₂-SSN was 2.59-214.6 mg/L Cl₂, and Ti/IrO₂ was 0.55-49.21 mg/L Cl₂. Moreover, the generation of the reactive chlorine species and degradation of Eosin-Y increased by 3.79-7.60 times and 1.06-2.15 times compared with that of Ti/IrO₂. Among these voltages, the generation of the reactive chlorine species and degradation of Eosin-Y were the most improved at 2.25 V. Accordingly, in the Ti/IrO₂-SSN electrode, it can be assumed that the competitive reaction between chlorine ion oxidation and water oxidation is minimized at an applied voltage of 2.25V.

• Journal of Welding and Joining
• /
• 제28권6호
• /
• pp.35-39
• /
• 2010

Generally, ceramic material is very difficult to machine due to high strength and hardness. However, ceramic material can be machined at high temperature by plastic flow as metallic material due to the deterioration of the grain boundary glassy phase. Recently, a new method was developed to execute cutting process with CBN cutting tool by local heating of surface with laser. There are various parameters in LAM because it is a complex process with laser treatment and machining. During laser assisted machining, high power results in reducing of cutting force and increasing tool life, but excessive power brings oxidation of the surface. The effect of laser power, feed rate, cutting depth and etc. were investigated on the life of cutting tool. Chips were observed to find out suitable machining conditions. Chips of SSN had more flow-types than HIPSN. It means SSN is easier to machining. The life of cutting tool was increased with increasing laser power and decreasing feed rate and cutting depth.

• 한국약용작물학회지
• /
• 제25권4호
• /
• pp.238-243
• /
• 2017

Background: The production method of ginseng seedlings for ginseng cultivation is very important to ensure healthy rooting system as well as high quality, and yield of the resultant plants. This study was carried out to compare the growth characteristics of 2-year-old ginseng plants that were produced from seedlings grown in self soil nursery (SSN), nursery soil (NS) or hydroponic culture (HC). Methods and Results: The shading prop used was composed of four-layered 4 polyethylene (blue 3 + black 1) shade screen. The management of main field was done by inserting oil cake (1,200 kg/10 a) and then allowing Sudan grass to grow for a year. Seedling transplantation was carried out on April 6. Root growth was measured on October 25. Root weight was observed to be excellent at 6.0 g, following SSN transplantation. Root length was 21.2 cm for HC seedlings, but these plants had a physiological disorder (i.e., rusty root), in 83.5% plants of this treatment. The ratio of PD/PT (protopanaxadiol saponins / protopanaxatriol saponins) was higher in NS seedlings. Plant analysis revealed that Fe content was lower in HC seedlings with high rustiness. The growth of 2-years-old ginseng was different following these varying seedling cultivation methods, but seedlings from NS were not different from those grown in SSN. Conclusions: For the propagation of 2-year-old ginseng plants, NS seedlings may be a good substitute for SSN seedlings.

• ETRI Journal
• /
• 제45권6호
• /
• pp.1079-1089
• /
• 2023

Stroke is one of the leading causes of long-term disability worldwide, placing huge burdens on individuals and society. Further, automatic human activity recognition is a challenging task that is vital to the future of healthcare and physical therapy. Using a baseline long short-term memory recurrent neural network, this study provides a novel dataset of stretching, upward stretching, flinging motions, hand-to-mouth movements, swiping gestures, and pouring motions for improved model training and testing of stroke-affected patients. A MATLAB application is used to output textual and audible prediction results. A wearable sensor with a triaxial accelerometer is used to collect preprocessed real-time data. The model is trained with features extracted from the actual patient to recognize new actions, and the recognition accuracy provided by multiple datasets is compared based on the same baseline model. When training and testing using the new dataset, the baseline model shows recognition accuracy that is 11% higher than the Activity Daily Living dataset, 22% higher than the Activity Recognition Single Chest-Mounted Accelerometer dataset, and 10% higher than another real-world dataset.

• 한국생명과학회:학술대회논문집
• /
• 한국생명과학회 2003년도 제39회 학술심포지움
• /
• pp.58-58
• /
• 2003

• Journal of Electrical Engineering and Technology
• /
• 제10권2호
• /
• pp.551-559
• /
• 2015

This paper's focus is in reducing the torque ripple and increasing the average torque by optimizing switching angles of 8/6 switched reluctance motor while implementing a robust speed controller in the outer loop. The mathematical model of the machine is developed and it is simulated using MATLAB/Simulink. An objective function and constraints are formulated and Optimum turn-on and turn-off angles are determined using Particle swarm optimization and Genetic Algorithm techniques. The novelty of this paper lies in implementing sliding mode speed controller with optimized angles. The results from both the optimization techniques are then compared with initial angles with one of them clearly being the better option. Speed response is compared with PID controller.

• Journal of electromagnetic engineering and science
• /
• 제6권1호
• /
• pp.62-70
• /
• 2006

This paper presents a new power plane design method incorporating a single geometry derived from a unit cell of photonic bandgap(PBG) structure. This method yields constantly wide suppression of parallel plate resonances from 0.9 GHz to 4.2 GHz and is very efficient to eliminate PCB resonances in a specified frequency region to provide effective suppression of simultaneous switching noise(SSN). It is shown that with only two cells the propagation of unwanted high frequency signals is effectively suppressed, while it could provide continuous return signal path. The measured results agree very well with theoretically predicted ones, and confirm that proposed method is effective for reducing EMI, with measured near-field distribution. The proposed topology is suitable for design of high speed digital system.