• Journal of Animal Science and Technology
• /
• v.44 no.3
• /
• pp.305-314
• /
• 2002

For the Exp. 1, a total of seventy two pigs (10.53${\pm}$0.02kg average initial body weight) were used in a 38-d growth assay to determine the effects of Saccharomyces cerevisiae (SC) supplementation on growth performance and fecal microbial populations. Dietary treatments included 1) CON (corn-dried whey-SBM based diet), 2) SC0.2 (CON diet+0.2% SC) and 3) SC0.4 (CON diet+0.4% SC). Through the entire experimental period, ADG, ADFI and gain/feed were not significantly different among the treatments. At d 7 and 14 after the onset of the experiment, fecal Lactobacilli sp. count increased as the concentration of SC in the diets was increased (linear effect, P$<$0.01). At d 7 after the onset of the experiment, fecal Escherichia coli count decreased as the concentration of SC in the diets was increased (linear effect, P$<$0.02, quadratic effect, P$<$0.03). For the Exp. 2, forty five pigs (49.71${\pm}$0.45kg average initial body weight) were used in a 28-d growth assay to determine the effects of complex probiotics (CPB, Phichia anomala ST, Galactomyces geotrichum SR59, Thiobacillus sp.) supplementation on growth performance, nutrient digestibility and fecal $NH_3$-N and volatile fatty acid concentrations. Dietary treatments included 1) CON (corn-SBM based diet), 2) CPB0.2 (CON diet+0.2% CPB) and 3) CPB0.3 (CON diet+0.3% CPB). Through the entire experimental period, pigs fed CPB0.3 diet significantly increased their ADG compared to pigs fed CON and CPB0.2 diets (P$<$0.05). Also, apparent digestibility of DM and N in pigs fed CPB0.3 diet was greater than for pigs fed CON diet (P$<$0.05). Fecal $NH_3$-N decreased (P$<$0.05) in the pigs fed CPB diet compared to pigs fed CON diets. Also, pigs fed CPB0.3 diet significantly decreased their fecal propionic acid compared to pigs fed CON diets (P$<$0.05). In conclusion, the results obtained from these feeding trials suggest that the dietary SC for nursery pigs affects fecal microbial population. In finishing pigs, supplemental CPB was effective to improve ADG and nutrient digestibility but to decrease fecal noxious gas emission.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1248-1256
• /
• 2014

The purpose of this study was to investigate the mechanisms of behind $SO_2$ formation and elevated cause of reducing power in purple bamboo salt (PBS) along with an analysis of physicochemical properties, content of sulfur compounds, oxidation reduction potential (ORP), mineral contents of salt type (MSS, mudflat solar salt; BS, bamboo salt), and addition of raw bamboo (RB). $SO_2$ content of 630 ppm was detected in PBS. $SO_2$ was not detected in MSS, BS, or RB, whereas $SO_2$ (782 ppm) from $K_2SO_4$ was detected after heating a NaCl, KCl, $MgCl_2$, $MgSO_4$, MgO, $CaCl_2$, $K_2SO_4$, and $FeSO_4$ with RB. $SO_2$ content of BS increased with baking time, and it originated from BSRB1 (13.88 ppm) to BSRB4 (109.13 ppm). $SO_3{^{2-}}$ originated only from MSSRB4 and BSRB2~BSRB4. Sulfate ion content decreased along with increasing $SO_2$ and sulfite ion contents. ORP increased with baking time of MSS and BS, and it was present at higher levels in BSRB4 (-211.40 mV) of BS than MSS. Insoluble content was higher in BS than MSS. Further, Ca, K, and Mg ion contents decreased in MSS and increased in BS with baking time. BSRB4 had 1.4 fold higher levels of Ca, 1.5 fold higher levels of Mg, and 1.8 fold higher levels of K than BS. Li, Al, Mn, Fe, and Sr in MSS as well as Al, Fe, and Ni in BS increased with baking time. Anions (Cl, $NO_3$, and Br) and heavy metals (Pb, Cd, Hg, and As) between MSS and BS were not significantly different. These results suggest that the reducing power of BS was due to $SO_2$ and sulfite ion. To increase the amounts of these compounds and reducing power, higher melting temperature and longer baking time are necessary along with BS, which is created by the addition of RB to roasted salt.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.595-599
• /
• 2011

'Goami 3' is a new japonica rice cultivar developed from a cross between Suweon464 and Daeanbyeo by the rice breeding team of National Institute of Crop Science, RDA. 'Goami3' has about 130 days growth duration from transplanting to heading in central plain area of Korea. It has a good semi-erect plant type and resistance to lodging of about 79 cm in culm length. 'Goami 3' had 15 panicles per hill and 104 spikelets per panicle. 'Goami 3' has very high amylose (29.5%) and high non-dietary starch compared with Hwaseongbyeo. This rice variety has slow senescence and 47% tolerance to viviparous germination during the ripening stage. 'Goami 3' is susceptible to leaf blast, bacterial blight, virus disease and insect pest. The yield performance of this cultivar in milled rice was about 3.92MT/ha by ordinary season culture in local adaptability test from 2005 to 2007. 'Goami 3' is adaptable to central and southern plain area of Korea.

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.3
• /
• pp.249-254
• /
• 2019

'Japonica 6' is a japonica rice variety developed from a cross between 'MS11', the beginning variety adaptable to tropical region, and 'IR86743-28-1-4', an elite line of high yield and good plant type by a Korea(RDA)-IRRI cooperative breeding program at IRRI in 2017. The growth duration of 'Japonica 6' is 121 days from sowing to harvest. It is 10 days later than that of the check variety 'MS11'. The culm length of 'Japonica 6' is 70 cm, and 1,000-brown rice grain weight is 26.7 g. It has a shorter culm and a larger grain. size than that of MS11. 'Japonica 6' is moderately resistant to blast disease but susceptible to bacterial blight, tungro virus and plant hoppers. The milled rice recovery rate of 'Japonica 6' is improved than that of 'MS11'. The head rice rate of 'Japonica 6' is significantly higher than that of 'MS11'. Yield of 'Japonica 6' is averagely 3.59 MT/ha of milled rice in 5 areas of the Philippines. The 'Japonica 6' was registered in Philippines and would be adaptable to the diverse regions of tropical Asia (Registration No in Philippines. BPI-NSIC-2017-Rc 484SR).

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.61-70
• /
• 2019

"Jungmo2510", a rye cultivar, Secale cereal L., was developed by National Institute of Crop Science, RDA in 2015. It was developed from open pollination from within 10 rye cultivars or lines including "Chochun" in 1995. The line "SR95POP-S1-523-1-5-5-4-7-3-B-16-3-19" was selected for its excellent agronomic appearance and was placed in yield trials for two years from 2011 to 2012. The line was designated "Homil55" and was placed in regional yield trials at the four locations around Korea from 2013 to 2015, during which time the name "Jungmo2510" was given. This cultivar is an erect plant type and leaves of short and broad size with a green color, a yellow colored, medium-diameter culm, and a yellowish brown-colored, medium-size grain. The heading date of "Jungmo2510" was April 16, which were 2 days earlier than that of "Gogu". "Jungmo2510" also showed similar to winter hardiness and greater resistance to lodging compared to those of the check cultivar. Over three years, the average dry matter yield of "Jungmo2510" was 802 kg 10a^-1 , which was harvested in late April and was lower than that of the check cultivar "Gogu" (825 kg). The seed productivity of "Jungmo2510" was approximately 481 kg 10a^-1 , which was 2.4% less than that of the check. "Jungmo2510" was higher to than "Gogu" in term of protein content (9.1% and 8.0%, respectively), total digestible nutrients(TDN)(57.5% and 55.5%, respectively), and TDN yield 10a^-1(419 kg and 392 kg, respectively). This cultivar is recommended as a fall sowing crop in areas where the average daily minimum-mean temperatures are higher than -12 ℃ in January, and as a winter crop for whole-crop forage before the planting of rice or green manure around Korea.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.469-484
• /
• 2022

The Janggun Pb-Zn deposit has been known one of the four largest deposits (Yeonhwa, Shinyemi, Uljin) in South Korea. The geology of this deposit consists of Precambrian Weonnam formation, Yulri group, Paleozoic Jangsan formation, Dueumri formation, Janggum limestone formation, Dongsugok formation, Jaesan formation and Mesozoic Dongwhachi formation and Chungyang granite. This Pb-Zn deposit is hydrothermal replacement deposit in Paleozoic Janggum limestone formation. The wallrock alteration that is remarkably recognized with Pb-Zn mineralization at this deposit consists of mainly rhodochrositization and dolomitization with minor of pyritization, sericitization and chloritization. Wallrock alteration is divided into the five zones (Pb-Zn orebody -> rhodochrosite zone -> dolomite zone -> dolomitic limestone zone -> limestone or dolomitic marble) from orebody to wallrock. The white mica from wallrock alteration occurs as fine or medium aggregate associated with Ca-dolomite, Ferroan ankerite, sideroplesite, rutile, apatite, arsenopyrite, pyrite, sphalerite, galena, quartz, chlorite and calcite. The structural formular of white mica from wallrock alteration is (K_0.77-0.62Na_0.03-0.00Ca_0.03-0.00Ba_0.00Sr_0.01)_0.82-0.64(Al_1.72-1.48Mg_0.48-0.20Fe_0.04-0.01Mn_0.03-0.00Ti_0.01-0.00Cr_{0.00As0.01-0.00}Co_0.03-0.00Zn_0.03-0.00Pb_0.05-0.00Ni_0.01-0.00)_2.07-1.92 (Si_3.43-3.33Al_0.67-0.57)_4.00O₁₀(OH_1.94-1.80F_0.20-0.06)_2.00. It indicated that white mica from wallrock alteration has less K, Na and Ca, and more Si than theoretical dioctahedral micas. The white micas from wallrock alteration of Janggun Pb-Zn deposit, Yeonhwa 1 Pb-Zn deposit and Baekjeon Au-Ag deposit, and limestone of Gumoonso area correspond to muscovite and phengite and white mica from wallrock alteration of Dunjeon Au-Ag deposit corresponds to muscovite. Compositional variations in white mica from wallrock alteration of these deposits and limeston of Gumoonso area are caused by mainly phengitic or Tschermark substitution mechanism (Janggun Pb-Zn deposit), mainly phengitic or Tschermark substitution and partly illitic substitution mechanism (Yeonhwa 1 Pb-Zn deposit, Dunjeon Au-Ag deposit and Baekjeon Au-Ag deposit), and mainly phengitic or Tschermark substitution and partly illitic substitution or Na⁺ <-> K⁺ substitution mechanism (Gumoonso area).

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.3
• /
• pp.319-329
• /
• 1996

During the monsoon in Bangladesh, the possibility of preserving wet ($700g\;H_2O$) straw by urea (50 g/kg straw DM) with or without polythene cover has been studied. The quality of preserved straw (PS) in terms of colour, smell and fungal infestation were recorded. Nutritive value of the PS was compared to that of a dry straw (DS) in two separate feeding trials on growing bulls (about 290 kg) without (Expt. 1) or with (Expt. 2) concentrate supplements. Over 96% of the wet straw was excellently preserved for over 5 months when covered with polythene in horizontal heaps (of appx. 4 tons). Whereas only 33% of the straw was well preserved in the uncovered (dome shaped) heaps (of approximately 9.5 tons). Each ton of wet straw costed Tk. 1413 and its preservation cost incurred Tk. 345. Urea preservation increased the crude protein content (95 vs. 50 g/kg), dry matter (DM) degradability at all (8, 16, 24, 48, 72 and 96) hours of incubation and at 48 hours, DM degradability (%) were 45 and 25 respetively for the PS and the DS. When fed alone, DM intake (75 vs. $106g/kg\;W^{0.75}/d$), total microbial N yield (27 vs. 54 g/d) and growth rate (-379 vs. 283 g/d) were higher (p < 0.01) in the PS than the DS. Supplementation of concentrate reduced the straw DM intake both in the DS ($51g/kg\;W^{0.75}/d$) and the PS ($958g/kg\;W^{0.75}/d$), but the substitution rate (SR%) was higher in the PS (42) than the DS (27). Higher substitution rate was probably responsible for the reduction in the differences between the DS and PS in their nutrient digestibilities, total microbial N yield (62 vs. 64 g/d) and growth rate(669 vs 339 g/d) when supplemented with concentrate. On 28th day of Expt. 2, feeding PS from one of the polythene covered heaps resulted nervous disorder due to unknown reason(s). Further studies on the effect of size and shape of heap on the preservation quality need to be determined.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.97-101
• /
• 2005

Bi-22l2 tubes for fault current limiter (FCL) were fabricated by centrifugal melting process. $SrSO_4$ ($10\;wt.\;\%$) was added to Bi-2212 powder to lower the melting point of Bi-22l2 and to improve the mechanical properties. The BSCCO powder was completely melted at $1300\;^{\circ}C$ using the RF furnace and then poured into rotating steel mold. The steel mold, preheated at $450\;{\circ}C{\sim}550^{\circ}C$ for 2 hour was rotated at $1020{\sim}2520\;RPM$. The solidified BSCCO tube was cooled down to room temperature in the furnace for 48 hours and separated from the mold between Bi-2212 and the mold. $ZrO_2$ solution was used to separate it easily from the mold and Ag tape was attached in the mold inner wall of the mold to analysis electrical property. Bi-22l2 tube was often cracked when the cooling rate was high. BSCCO tubes with $70{\Phi}{\times}100\;mm,\;50{\Phi}{\times}100\;mm$ and $30{\Phi}{\times}150\;mm$ size were fabricated by centrifugal melting process. The $J_{c}s$ of tubes with $50{\Phi}{\times}100\;mm{\times}4.0\;t$ and $50{\Phi}{\times}100\;mm{\times}4.l\;t$ were 178 and $74.2\;A/cm^2$ at 77K, respectively. The processing condition for Bi-2212 tube fabrication was investigated using XRD and SEM analyses.

• Transactions of the Korean hydrogen and new energy society
• /
• v.9 no.1
• /
• pp.8-15
• /
• 1998

The catalytic hydrogenation of carbon dioxide has been studied for the fixation of carbon dioxide to mitigate global warming problems, but it needed hydrogen, which the price is still high. Recently, the electrochemical reduction of carbon dioxide has been drawn attractions because carbon dioxide could be converted to the valuable chemicals such as methane, ethane and alcohols electrochemically in the electrolyte solution using a catalytic electrode. This system is simple because the water electrolysis and hydrogenation take place at the same time using the surplus electricity at midnight. In this work, a continuous electrochemical reduction system was fabricated, which was composed of the reduction electrode (copper or perovskite type, $2{\times}2cm^2$), reference electrode(platinum, $2{\times}6cm^2$), standard electrode(Ag/AgCl), and potassium bicarbonate electrolyte solution saturated with carbon dioxide. The quality and quantity of the products and reduction current were analyzed, according to the electrolyte concentration and electrode type.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.104-114
• /
• 2001

To investigate the effects of the addition of Nb and Sn on the recrystallization of Zr- Sn-Nb alloys, both Vickers micro-hardness test and TEP measurement were carried out on cold-worked specimens annealed at various temperatures from $300^{\circ}C$ to 75$0^{\circ}C$. The microstructures of heat treated specimens were analyzed by optical microscope, SEM, and TEM. The study of microhardness and microstructures showed that both recrystallization process and grain growth were retarded as the activation energy was increased by the addition of Nb and Sn. Especially, the addition of Sn was more effective on retarding recrystallization. Precipitates were formed more easily when Nb was added because the solubility of Nb into Zr is lower than that of Sn. However, the recrystallization process was affected more by Sn than Nb because the strain field formed by substitutional Sn repressed the dislocation movement. TEP was increased due to the decrease of electron scattering as recovery and recrystallization were proceeded and saturated when the recrystallization completed. However, when precipitates formed, TEP was increased because the decrease of solute concentration near the precipitates caused the decrease of electron scattering.