• Transactions of Materials Processing
• /
• v.30 no.5
• /
• pp.236-241
• /
• 2021

This study describes the cold stamping process design procedure to secure the formability and dimensional accuracy of the automotive structural component fabricated by 1.5GPa grade ultra-high strength steel sheet. The target product is selected as the front side rear lower member which is the most important energy absorption part in the frontal impact condition. To secure the product quality, an intermediate product shape is added while considering the low elongation and high strength characteristics of 1470Mart. The sequential optimization procedure of the intermediate product shape, the fine dimensional quality is then achieved without any crack or wrinkling. The cold stamping method with ultra-high strength steel sheets is validated by conducting the die tryout of the front side rear lower member.

• Design & Manufacturing
• /
• v.15 no.1
• /
• pp.21-25
• /
• 2021

When the product is removed from the mold after molding during the sheet metal molding process, elastic recovery causes a springback phenomenon. Much research has been done to minimize this phenomenon. In this study, V-bending experiments were conducted using galvanized steel sheets, stainless steel, and aluminum sheet materials, using a total of nine types of thin sheet materials of 1.0t, 1.5t, and 2.0t, respectively. Molding analysis and experimental data were compared and analyzed. In the case of galvanized steel sheets, it was considered that the springback phenomenon occurs more frequently in molding analysis than in experiments. It was considered that the springback phenomenon occurs greatly in the experiment, not the interpretation of the molding of the stainless steel plate and the aluminum plate. It was considered that the springback occurrence tendency of the molding analysis and the experiment was the same, and the springback occurrence error rate of the molding analysis and the experimental result was about 4.0%.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.62-65
• /
• 1999

To reduce the cost of finite element analyses for sheet forming a 3D hybrid membrance/sheel method has been developed to study the springback of anisotropic sheet metals. in the hybrid method the bending strains and stresses were analytically calculated as post-processing using incremental shapes of the sheet obtained previously from the membrane finite element analysis. To calculate springback a shell finite element model was used to unload the final shape of the sheet obtained from the membran code and the stresses and strains that were calculated analytically. For verification the hybrid method was applied to predict the springback of a 2036-T4 aluminum square blank formed into a cylindrical cup. the springback predictions obtained with the hybrid method was in good agreement with results obtained using a full shell model to simulateboth loading an unloading and the experimentally measured data. The CPU time saving with the hybrid method over the full shell model was 75% for the punch stretching problem.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.76-84
• /
• 1997

A process sequence in precision press forming of electrnic components is investigated by the finite element method. Aperture, a key component of electronic gun, is formed through a sequence of about 15 operation, among which the beading & bending, the first piercing, the first coining, and the second coining operations are expected to be most critical in view of industrial experts opinions. Thus, the analysis per- formed by a commercial code MARC focuses on the three operations, and comparisons are made between the results of the analysis and the measurements of experimental forming of the component.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.607-616
• /
• 2002

This study analyzed the effects of pH, sex, backfat thickness, ribeye area, cold carcass weight, shipping month, muscle internal temperature, average daily temperature, and average relative humidity for slaughtered Hanwoo to meat color by season. The analyses focused on interaction and each effect to meat color of the factors. For the result for analysis of multiple linear regressions, meat color values were decreased as pH increased in all meat color, and the meat color values increased as the backfat thickness was increased. As the results of the decision tree analysis by each factor, cow and steer slaughtered in spring and autumn were the highest in the lightness(L*). The redness(a*) was the cases that pH was less than 5.63 and average relative humidity was over than 71.5% for Hanwoo slaughtered in autumn. The chroma(C*) value was the highest for Hanwoo that was slaughtered in summer and autumn, the pH was less than 5.60, and the back fat thickness was over than 8 mm. The hue angle($h^0$) was shown that the muscle internal temperature was less than 4.7$^{\circ}C$ among Hanwoo which was slaughtered in spring, summer, and autumn, the pH was less than 5.66, and the back fat thickness was over than 8 mm.

• Journal of the Korean Geographical Society
• /
• v.38 no.4
• /
• pp.505-517
• /
• 2003

The purpose of this paper is to examine the origin of materials of sanddune in the Chungcheongnamdo. The sands consist mainly of quartz with lesser amount of feldspar and other heavy minerals. With the exception of those from the granite, the sands have a very fine texture. Another characteristic of the sand grains is the low degrees of roundness and grading which indicates that the source areas of the material are not far from the accumulating field. The rivers and streams of this region are not effective in transporting sediments for the coastal dunes. It has been recognized that the beaches and sanddunes have recently been receded as a result of the decrease in materials and the devastating actions of the breakers. The degradation process occurs most actively when the spring tides attack the beaches and foredunes. There are strata with red tint along the coastal areas of the Chungcheongnamdo which trace their origin back to the Pleistocene. From the fact that they contain little or no gravels, the strata are believed to have been the sanddunes during the last interglacial period. This fossil dunes provide part of the materials for the development of the present-day sanddunes along the coastal areas of the region.

• Journal of agricultural medicine and community health
• /
• v.24 no.1
• /
• pp.145-159
• /
• 1999

To find the association, between vinyl house work and the prevalence of low back pain, a questionnaire survey was made toward 215 vinyl house farmers and 228 general farmers without vinyl house who are cared by Jungjung Community health Practioners at Soobuk Myun, Damyang-gun, Chollanamdo. 1. Vinyl house farmers were significantly younger in age, higher in educational status higher survival rate of spouse, higher economic state and less cared by medical aid than general farmers. 2. Vinyl house farmers showed shorter career for agricultural work, used modern farming instrument more frequently and worked with sitting position. 3. During unbusy season in general agriculture, vinyl house farmers consumed significantly more time in agricultural work and general activity, but no significant difference of time of the above activity among busy season. 4. During the last spring season when most vinyl house work was performed, vinyl house farmers showed significantly higher prevalence of low back pain than general farmers, but no significant difference of prevalence among the two groups for the last one week. 5. By the simple analysis statistical significant related variables with low back pain was found to be sex(p<0.001), educational status(p<0.05), work posture(p<0.001) and use of modern agricultural machine(p<0.05). 6. By the multiple logistic regression the odds ratio for low back pain among vinyl house farmers were 2.08(95% confidence interval 1.31-3.00) compared to general farmers, the odds ratio among female was 2.35(95% confidence interval 1.24-4.47) to male, the odds ratio among illiterate persons were 2.60(95% confidence interval 1.24-4.47) to high school graduate, and the odds ration among primary school graduate was 2.19(95% confidence interval 1.04-4.47) to high school graduate. In conclusion because vinyl house farmers showed significantly higher rates of low back pain compared to farmers without vinyl house, continuous study to find the true cause of low back pain among vinyl-house farmers and active effort to prevent low back pain are necessary.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.781-792
• /
• 2015

This study aims to develop a spring/fall motorcycle jacket for quick service transporter. Depending on the results of the previous research, this study produced the tested jacket which was improved in material, pattern, and design. For the tested jacket, 100% polyester fabric excellent in strength, durability and abrasion-resistance was selected as a major material, and Cordura was used as a partial material to improve the strength and abrasion-resistance of the sleeve side lines, elbow and shoulder areas. The retro-reflection material was applied partially in order to improve visibility of the jacket in the night or in a dark place. A total of 7 pockets were composed in the jacket for the sufficient storage spaces. The functional design elements such as the 2-way zipper and the placket at the center front, the action pleats at the upper part of back armholes, the pit-zip at armpit were applied. In addition, the sleeve pattern was bent with the shape of elbow curvature in time of driving and the back length of the jacket was lengthened 4cm. As a result of the appearance assessment, there was a significant difference from the existing jacket in all items but chest size, shoulder width, cuffs circumference, and jacket hemline circumference. In motion adaptability and field activity appropriateness assessments, the assessment grade for all items was found to be commonly higher than that of the existing jacket, and thus, the tested jacket was assessed to be suitable for a motorcycle jacket design for the quick service transporters.

• Korean Journal of Ichthyology
• /
• v.5 no.2
• /
• pp.194-207
• /
• 1993

This paper deals with seasonal fluctuation of fish communities around the coast of Kunsan, Korea from 1992 to 1993. A total of 98 fish species with 82 genera, 47 families, and 14 orders were collected during the study. Among fishes caught by trawl net, Cynoglossus joyneri and Repomucenus ornatipinnis predominated throughout the year, and by long back net Harengula zunasi and Engraulis japonica except winter season. There is a difference between biomass caught by long back net and by trawl net, the former showing a peak in summer and the latter showing peaks in late spring and winter. This result appears to be due to the occurrences of Platycephalus indicus and Liparis tanakai for the spawning in investigated areas. Among the 14 species collected in the intertidal zone, 13 species of the family Gobiidae were mostly found in the spawning season. These results may suggest that the coastal area of Kunsan provides a good spawning ground for the coastal fishes. It is considered that the seasonal fluctuation of the abundance and species composition in fishes in this area is mainly affected by the water temperature and the bottom habitats.

• The Journal of Korean Medicine
• /
• v.38 no.1
• /
• pp.125-133
• /
• 2017

Objectives: The purpose of this study is to investigate the correlation between postpartium joint diseases and maternal season. So it can prevent postpartum joint diseases and provide fundamental data about postpartum health care. Methods: The subject of the present study was 219 women (142 women who completed vaginal delivery and 77 women who delivered by cesarean section) who completed labor between November 1, 2013 and November 31, 2016, at the clinic of OB&GYN. They have been taking good care of their health at postpartum clinic in Andong Woori Women Hospital. We investigated the various symptoms and situation which occurred from the moment of hospital to postnatal admission health care period and oriental doctor examined the patients. We classified the symptoms by the age of patients, the method of delivery, the term of pregnancy, the body weight of infant, the weight change of mother and the way of feeding. Through data analysis, we investigated the correlation between maternal season and postpartum joint diseases. Results: Postpartum joint diseases were the most common among all symptoms after childbirth. Postpartum joint diseases were classified into shoulder area pain and low back pain. In low back pain, there was no significant difference between maternal season and postpartum joint diseases. In shoulder, wrist and finger pain, pain was the most severe at winter delivery. It was the most painful in winter, followed by autumn, spring and summer. Conclusion: There was a close correlation between postpartum joint disease manifestations and maternal season.