Browse > Article

A comparative study of experiment and analysis of sheet matal in V-bending  

Jeong, Gyun-Min (Department of Metal Mold Design Engineering, Kongju National University)
Choi, Kye-Kwang (Department of Metal Mold Design Engineering, Kongju National University)
Publication Information
Design & Manufacturing / v.15, no.1, 2021 , pp. 21-25 More about this Journal
Abstract
When the product is removed from the mold after molding during the sheet metal molding process, elastic recovery causes a springback phenomenon. Much research has been done to minimize this phenomenon. In this study, V-bending experiments were conducted using galvanized steel sheets, stainless steel, and aluminum sheet materials, using a total of nine types of thin sheet materials of 1.0t, 1.5t, and 2.0t, respectively. Molding analysis and experimental data were compared and analyzed. In the case of galvanized steel sheets, it was considered that the springback phenomenon occurs more frequently in molding analysis than in experiments. It was considered that the springback phenomenon occurs greatly in the experiment, not the interpretation of the molding of the stainless steel plate and the aluminum plate. It was considered that the springback occurrence tendency of the molding analysis and the experiment was the same, and the springback occurrence error rate of the molding analysis and the experimental result was about 4.0%.
Keywords
Banding; Sheet metal forming; Spring back; Molding analysis;
Citations & Related Records
연도 인용수 순위
  • Reference
1 S G Lee, J O Jung, S G Kim, W J Jung. "A springback analysis of LCD TV bottom chassis", Journal of the Korean Society for Mold Engineering, Vol.6 No.1, pp. 63-66, 2012.
2 J H Lee, D W Kim, S M Sohn, M Y Lee, Y H Moon. "Analysis of Springback of Sheet Metal(II): Experimental Validation of Analytical Model", Korean Society of Plasticity and Technology, Vol.16 No.7, pp. 516-520, 2007.
3 M K Choi, H Huh. "Investigation of Springback Behavior of DP780 Steel Sheets after the U-bending Process", P Korean Society of Plasticity and Technology, Vol.21 No.6, pp. 384-388, 2012.
4 J S Park, H J Choi, S H Kim. "Improvement in Prediction Accuracy of Springback for Stamping CAE considering Tool Deformation", Korean Society of Plasticity and Technology, Vol.23 No.6, pp. 380-385, 2000.
5 J W Yun, S H Cho, C K Lee. "A study on the factors influencing at corner area material thickness changes of rectangular drawing products", Journal of the Korean Society for Mold Engineering Vol.14 No.1, pp. 22-29, 2020.
6 Y J Jeon, Y M Heo, S H Yun, D E Kim., "Stamping process design to develop a urea tank cover for excavators based on sheet metal forming analysis", Journal of the Korean Society for Mold Engineering, Vol.14 No.2, pp. 49-55, 2020.