• Korean Journal of Medicinal Crop Science
• /
• v.27 no.6
• /
• pp.390-396
• /
• 2019

Background: Usually ginseng seeds are sown during autumn and spring. Sowing in spring often results in poorer seedling establishment than in autumn. One of the reasons for poor germination could be cold-treatment condition for breakage of physiological dormancy during winter. Here we tested the effects of storage temperature used during cold treatment on germination. Methods and Results: Germination properties were observed after dehiscent seeds were stored as wet and dry at 2℃, -2℃, -3.5℃ and alternating temperature (AT). Seed dryness and storage temperature affected germination properties (p < 0.01). Wet and AT condition germinated highest, and wet and -3.5℃ condition germinated lowest, which was 91.2% and 1.4% respectively. Mean germination time (MGT) of the wet and AT condition was faster than other treatments at 2.4 days, and the dry and -2℃ condition was the longest. Germination performance index (GPI) was highest for wet and AT condition (37.7%) and the lowest for wet and -3.5℃ condition (0.5%). The growth of above-ground and below-ground were the best for wet and 2℃ condition, and wet seeds showed better growth than dry seeds (p < 0.01). Conclusions: For cold treatment, ginseng seeds may not be stored below -2℃ for successful germination during spring sowing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1919-1926
• /
• 2011

This paper proposes an object-oriented software development guidance and an evaluation index for the productivity related to Hibernate 3.2 and iBatis 2.3 in same platform of Spring framework 2.5. Currently in production until the lightweight container architecture, known most commonly used architecture framework is Spring framework. Also intended to increase the productivity of database techniques are ORM. Hibernate and iBatis is an ORM tool is currently being used. In this study, Spring framework 2.5 is based on the framework of the same Hibernate 3.2 and iBatis 2.3 to design and implement the pilot system. In addition, comparison and standardization of software development productivity assessment is to provide guidance.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.4
• /
• pp.29-43
• /
• 2000

This study is carried out to investigate the cahracteristics of green management practices and green speed(i.e., ball-roll distance) on 129 Golf Courses in Korea, and to explain the effects of managemet practices that affect green speed. Data collected from green-keepers were subjected to frequency, correlation analysis, and multi-regression analysis using SPSSWIN(Statistical Package for the Social Science). The results are as follows. 1. In spring mowing height, 3.5-4 mm appeared the highest frequency(44.4%) and 4-4.5mm mowing height appeared the high frequency(41.0%). In summer mowing height, 4.5-5mm appeared the highest frequency(51.3%). In fall mowing height, 4-4.5mm appeared the highest frequency(41.0%). 2. In N-fertilizing amount of February and November, 0(zero) g/$m^2$ appeared the highest frequency. In N-fertilizing amount, of June and July 0-2 g/$m^2$ appeared the highest frequency. In N-fertilizing amount, of March, May, August, and September 2-4 g/$m^2$ appeared the highest frequency. In N-fertilizing amount, of October 2-4 or 6-8 g/$m^2$ appeared the highest frequency. 3. In spring topdressing times, 3-6 times appeared the highest frequency(52.6%). In spring topdressing amount, more than 2mm appeared the highest frequency(35.9%). In summer topdressing tierms, 0-3times appeared the highest frequency(71.8%). In summer topdressing amount, 0.5-1mm appeared the highest frequency(46.2%). In fall topdressing times, 0-3times appeared the highest frequency(47.4%). In fall topdressing amount, more than 2mm appeared the highest frequency(35.9%). 4. In spring irrigation tiems, 3-4times/a week appeared the highest frequency (30.6%). In spring irrigation amount, the irrigation below 5mm/day under appeared the highest frequency(38.7%). In summer irrigation times, 4-7times/ a week appeared the highest frequency(38.9%). In summer irrigation amount, 5-10mm/a day appeared the highest frequency(45.2%). In fall irrigation times, 2-3times/a week appeared the highest frequency(36.1%). In fall irrigation amount, the irrigation below 5mm/a day under appeared the highest frequency(45.2%). 5. In spring aeration times, 2 times appeared the highest frequency(55.2%). In spring aeration depth, 5-10mm appeared the highest frequency(81.6%). In fall aeration times, 1 time appeared the highest frequency(82.5%). In fall aeration depth, 5-10mm appeared the highest frequency(86.8%). 6. In spring green speed, 1.98-2.28 or 2.59-2.89mm appeared the highest frequency(32.7%). In summer green speed, 1.98-2.28mm appeared the highest frequency (46.9%). In fall green speed, 1.98-2.28mm appeared the highest frequency(38.8%). 7. The factors which affect green speed were mowing height, N-fertilizing, season, topdressing, irrigation, and aeration. Vertical mowing did not affect green speed. The order of the relevant important factors was mowing height >: N-fertilizing > season > topdressing > irrigation > aeration. Mowing height and N-fertilizing were the most important factors in green speed. As mowing height decreased, green sped always increased. As total N-fertilizing amount decreased, green speed increased. In summer, green sped decreased remarkably. As topdressing times increased and the topdressing amount decreased, green sped increased. As irrigation times increased and irrigation amount decreased, green speed increased.

• Journal of Hydrogen and New Energy
• /
• v.23 no.4
• /
• pp.404-411
• /
• 2012

This research numerically analyses the effects of the damping device on the operation characteristics of a free piston linear engine. In this paper, the free piston linear engine uses spring as a damping device. The investigated parameter is spring hardness which is varied at 0.5, 1, 2.9, and 14.7 N/mm. The effects of spring hardness on the dynamic characteristic, thermodynamic characteristic and electric power of the engine are investigated. Beside, the equivalent ratio is also changed to provide more information for this study. The simulation results show that, by increasing spring hardness from 0.5 to 14.7 N/mm, all of parameters related to dynamic characteristic such as piston velocity, acceleration, displacement, and frequency increase accordingly. Beside, the peak pressure in the cylinder and electric power are also increased when increasing spring hardness. The tendency is also observed at varied equivalent ratios.

• Korean Journal of Animal Reproduction
• /
• v.25 no.1
• /
• pp.79-84
• /
• 2001

This study was carried out to investigate the effects of spring (March~May) and summer (June~August) influencing semen characteristics, frozen-thawed sperm viability and serum testosterone concentration in Duroc boars. Results of this study were as follows: 1. There were no significant differences in the semen volume, pH and sperm concentration of Duroc boars between spring and summer. 2. Sperm motility and normal acrosome of raw semen in Duroc boars did not differ significantly between spring and summer. However, motility and normal acrosome of frozen-thawed sperm were higher in spring season than in summer season(P＜0.05). 3. Serum testosterone concentrations in Duroc boars were 2.15 ng/$m\ell$ in spring and 0.65 ng/$m\ell$ in summer. Serum testosterone concentrations in spring were higher thin those in summer (P＜0.05). 4. In conclusion, when serum testosterone concentrations in Duroc boars were higher, frozen-thawed sperm viability were higher.

• Journal of Sericultural and Entomological Science
• /
• v.32 no.1
• /
• pp.1-4
• /
• 1990

The resistance against drying of mulberry (Morus alba L.) graftages lifted in the fall and spring was examined by measuring water loss, survival, and regrowth. The graftages were exposed on the ground an4 covered with 2 sheets of straw mat for 0, 1, 3, 6, 10, and 15 days. 1. Temperatures in the mat ranged from 13 to -6.5$^{\circ}C$ in fall and 24 to -2.8$^{\circ}C$ in spring. Relative humidity was 37 to 100% in fall and 20 to 100% in spring. 2. Water loss from the graftages was less than 10% after 10 days exposure in fall, whereas there was 9.8% loss with 1 day exposure in spring. 3. Six days exposure in the spring caused the root hairs to dry and the root surface to become wrinkled longitudinally and turn yellowish-red. 4. Maximum exposure which allowed 100% survival and regrowth after planting was 6 days in fall and 3 days in spring under 2 sheets of straw mat.

• The Journal of Engineering Geology
• /
• v.17 no.3
• /
• pp.405-409
• /
• 2007

There exist 5 wells drilled at the Yecheon hot spring area, the distance between the wells is about $159m{\sim}702.6m$. The safe yield of each well is controlled by interference drawdown between a pumping well and an observation well after pumping test. The well No. 2 and the well No. 5 are the closest, at the distance of 159 m; therefore interference drawdown between two wells was occurred considerably. The drawdown of the well No. 2 (an observation well) was 16.67 m; the drawdown of the well No. 5 (a pumping well) was 17.21 m. The degree of the interference is about 97% and the safe yield decreased from $750m^3/day\;to\;24m^3/day$. Significant interference between two wells is due to the fact that the aquifer has 1.5 dimensions.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.699-708
• /
• 2005

To characterize the elemental composition of fine particles in urban area, $PM_{2.5}$ was collected by a 3-stage DRUM impactor at Gwangju during spring and summer. Time and size resolved concentrations for 19 trace elements were obtained by synchrotron X-Ray fluorescence analysis. Trace elements in summer were distributed in smaller size range compared to those in spring. Almost trace element concentrations in fine particles were highly increased during the Asian dust. In spring, soil elements such as Si, K, Ca, Ti and Fe had low enrichment factors indicating the dominant influence of soil dust. However, all elements had high enrichment factors in summer implying that these elements could be emitted from the anthropogenic sources. Factor analysis was conducted with the elemental composition data in order to identify anthropogenic sources of aerosols in urban area during spring and summer. Fine particles in spring have several sources such as soil dust originating from China continental region, coal and oil combustion, biomass burning, sea salt, ferrous and nonferrous metal sources. On the other hand, fine particles in summer were influenced by road dust, gasoline vehicle as well as coal and oil combustion, sea salt, ferrous and nonferrous metal sources.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.253-259
• /
• 1998

Minerals of spring water in 47 sites of Chonnam were analyzed. Samples were collected 2 times, autumn and winter. The mineral concentrations (mean value) at maximum distribution rate were Ca 3.9, K 0.78, Na 7.4, Mg 0.7, Si 9.4, Ba 0.004, Ni 0.007, F 0.16, Cl 4.9, $SO_4$ 1.5, Fe 0.001, Zn 0.002 ppm, respectively. In case of Na, K, Ca, Mg, Si, Cl, Ba and Ni, the correlation coefficient was positive (p<0.05). K and O values were used as the indexes of healthy and delicious water. The K and O indexes of spring water which appeared to be good for health and deliciousness were 6.3 and 5.2, respectively. 98% of spring water in Chonnam appeared to be good for health and deliciousness.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.2
• /
• pp.96-102
• /
• 1989

This field experiment was conducted to determine the effect of grazing and cutting management on the forage production and botanical composition at different legumes sown swards of the experimental field of Livestock Experiment Station. in Suweon, from Aug. 1985 to Oct. 1988. The results obtained are as follows: 1. Dry matter yield of cutting management (1213.0 kg/lOa) was higher by 19% than that of grazing management (1016.8 kg/lOa). Yield of pasture mixtures including alfalfa both cutting and grazing were higher than those including ladino clover and red clover. Yield under grazing was inferior to cutting in the first year but superior in the second year. 2. Seasonal dry matter production under grazing showed 5 1% in spring, 33% in summer and 16% in autumn, but under cutting showed 46% in spring, 42% in summer and 12% in autumn. 3. Daily dry matter production per 10a under grazing is decreased 5.9 kg in spring, 5.5 kg in summer and 3.7 kg in autumn. But under cutting is decreased 8.7 kg in summer, 6.6 kg in spring and 3.4 kg in autumn. 4. Botanical compositions of mixtures swards involving ladino clover and red clover were not influenced by method of defoliation. But mixtures swards including alfalfa were highly influenced by method of defoliation. Alfalfa ratio at the time of final utilization under grazing was about 30%, but under cutting was about 70-80%.