• New Physics: Sae Mulli
• /
• v.68 no.11
• /
• pp.1208-1214
• /
• 2018

The one-step spin coating method is reported as an excellent thin film process because it can be easily used to fabricate high-quality methyl-ammonium lead tri-iodide ($MAPbI_3$) perovskite layers. One of the important things in the one-step spin coating method towards obtaining high-quality $MAPbI_3$ layers is the anti-solvent (AS) engineering, which consists of an one-step deposition of the $MAPbI_3$ film and dripping of the AS. The properties of the $MAPbI_3$ layer were found to be strongly influenced by the amount, dispensing speed, and spraying time of the AS solution. The $MAPbI_3$ solution was prepared by dissolving lead iodide and methyl-ammonium iodide in N,N-dimethylformamide and adding N,N-dimethyl sulfoxide. Diethyl ether (DE) was used for the AS solution. The results indicate that a $MAPbI_3$ layer appropriately sprayed with DE is beneficial for improving film quality and device efficiency because nucleation of $MAPbI_3$ layer is affected by the characteristics of DE, which affect the film's crystallinity, density, and surface morphology. The $MAPbI_3$ layer, which was optimized by using 0.7 mL of DE, a 3.03 mL/sec dispensing speed, and a 7 second time to spray after spinning showed the best efficiency of 13.74%, which was reproducible.

• The Korean Journal of Pesticide Science
• /
• v.17 no.2
• /
• pp.126-132
• /
• 2013

The objectives of this study were to provide the basic data of the residue of deltamethrin in the stream water. Deltamethrin was treated on side of Ban-Suk stream and Juk-Dong ditch for hygienic purpose by air spray. The drift concentration of deltamethrin was investigated with different wind speed condition on Ban-Suk stream (A), and the change of residue with time course on Juck-dong ford (B). Also we found the residual change of deltamethrin until 48 hour in Yu-Seong stream confluence (C) where two streams join. Maximum residues of A were $0.17{\mu}g/L$ (5 min, 200 m) at strong wind speed and $4.42{\mu}g/L$ (0 min, 25 m) at moderate wind speed according to different wind velocity. Residues of B were $0.15{\sim}0.26{\mu}g/L$ (0~480 min) after spraying, and decreased to a non-detected level after 720 min. Residues of C were $0.15{\mu}g/L$ (0 min), $0.11{\mu}g/L$ (1 min) and $0.10{\mu}g/L$ (12 hr) after spraying, and no residues were detected in any other samples. From these results, it is concluded that deltamethrin residues in water should be rapidly diluted into stream water and affected negligible toxic effect to stream ecosystem.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.3
• /
• pp.142-150
• /
• 2023

As global warming continues, the time of invasion of Spodoptera frugiperda has been advanced and the inflow rate has been increasing, leading to great increases in damage to crops. In this study, in order to minimize crop damage caused by S. frugiperda, the control period was set for corn fields through control thresholds, and the control effects according to the chemical spraying methods were investigated in forage corn filed. Even under the condition of 4% injury level during the corn silking stage, the damage rate of ear was 70%, showing an aspect of extensive damage. The economic injury level of S. frugiperda second instar larvae was shown to be 0.7 larvae per stalk, and the control threshold level was shown to be 0.6 larvae. The income was calculated by applying the corn wholesale unit price, and according to the result, even under the condition of injury level of 4%, there was a loss of KRW 895,221/10a, and the higher the injury level, the greater the decrease in income. To control S. frugiperda, the insecticidal effects of 10 single formulations registered for S. frugiperda were tested, and according to the results, four types(emamectin benzoate, chlorantraniliprole, indoxacarb, and spinetoram) showed high insecticidal activity not lower than 93.3%, and three types (chloran- traniliprole, spinetoram, and indoxacarb) were considered to be effective in controlling S. frugiperda as they showed high residual effects through insecticidal effect persistence tests. Therefore, conventional control and aerial control were conducted twice at 7-day intervals with indoxacarb SC and chlorantraniliprol WP, which show high activity against S. frugiperda, respectively, prior to the silking of forage corn. As a result, conventional control showed higher control values, 46.3%p in the case of indoxacarb SC and 21.7%p in the case of chlorantraniliprol WP, than aerial control through the primary control. In the secondary control too, higher control values of 26.7%p in the case of indoxacarb SC and 40.4%p in the case of chlorantraniliprol WP were found in conventional control than in aerial control. Therefore, it is considered necessary to prepare measures to improve the control effects in the recent situation where alternative methods for manpower control are widely used.

• Journal of Life Science
• /
• v.34 no.7
• /
• pp.500-508
• /
• 2024

Recently, there has been increasing interest in enhancing the indoor air quality, particularly in response to the growing utilization of public facilities. The focus of this study was on assessing the efficacy and safety of an air sterilizer equipped with electrolytic salt catalysts. To that end, we evaluated the antimicrobial activity of the vapor spraying from the air sterilizer and its cytotoxicity in condensed form on human cell lines (HaCaT, BEAS-2B, and THP-1). Against the test organisms, which comprised five bacterial strains (Staphylococcus aureus, Bacillus subtilis, Escherichia coli, Pseudomonas aeruginosa, Salmonella typhimurium) and one fungal strain (Candida albicans), the air sterilizer exhibited relatively high antimicrobial activities ranging from 10.89 to 73.98% following 1 and 3 hr of vapor spraying, which were notably time-dependent. Importantly, cytotoxicity assessments on human cells indicated no significant harmful effect even at a 1.0% concentration. Comprehensive safety evaluations included morphological observations, gene expression (Bcl-2, Bax) tests, and FACS analysis of intracellular ROS levels. Consistent with previous cytotoxicity findings, these estimates demonstrated no significant changes, highlighting the air sterilizer's safety and antimicrobial activities. In a simulated 20-hr operation within an indoor environment, the air sterilizer not only showed an 89.4% removal of total bacteria but also a 100.0% removal of Escherichia sp. and fungi. This research outlines the potential of the developed electrolytic salt catalyst air sterilizer to effectively remove indoor microbial pollutants without compromising human safety, underscoring the solution that it offers for improving indoor air quality.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.163-169
• /
• 2012

We have conducted three experiments to develop a fertilizer-dissolving apparatus used in fertigation or hydroponics cultivation in order to decrease the fertilizer dissolving time and labor input via automation. All of the experiments were conducted twice. In the first experiment, four selected treatments were tested to dissolve fertilizers rapidly. The first treatment was to dissolve fertilizer by spraying water with a submerged water pump, placed in the nutrient solution tank. The water was sprayed onto fertilizer, which is dissolved and filtered through the hemp cloth mounted on the upper part of the nutrient solution tank (Spray). The second treatment was to install a propeller on the bottom of the nutrient solution tank (Propeller). The third treatment was to produce a water stream with a submerged water pump, located at the bottom of the tank (Submerged). Finally, the fourth treatment was to produce an air stream through air pipes with an air compressor located at the bottom of the tank (Airflow). The Spray treatment was found to take the shortest time to dissolve fertilizer, yet it was inconvenient to implement and manage after installation. The Airflow treatment was thought to be the best method in terms of the time to dissolve, labor input, and automation. In the second experiment, Airflow treatment was investigated in more detail. In order to determine the optimal number of air pipe arms and their specification, different versions of 6- and 8-arm air pipe systems were evaluated. The apparatus with 6 arms (Arm-6) that was made of light density polyethylene was determined to be the best system, evaluated on its time to dissolve fertilizer, easiness to use regardless of the lid size of the tank, and easiness to produce and install. In the third experiment, the Submerged and Arm-6 treatments were compared for their dissolving time and economics. Arm-6 treatment decreased the dissolving time by 8 times and proved to be very economic. In addition, dissolving characteristics were investigated for $KNO_3$, $Ca(NO_3)_2{\cdot}4H_2O$, and Fe-EDTA.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.120-125
• /
• 2019

A real-scale combustion test was conducted on a vinyl flooring in a divided space, with 50 mL of an inflammable liquid sprayed on it. The combustion behavior of the vinyl flooring was studied in real time, and the carbonization patterns of the surface and cross-sections of the carbonized vinyl floor were analyzed. When the flame ignited by gasoline reached its peak, a continuously flaming region, intermittent flaming region, plume region, etc., were formed. The combustion of 50 mL gasoline on vinyl flooring took 26 s, and a halo pattern was observed. This test involved spraying kerosene evenly on the vinyl flooring and attempting to ignite the flooring using a gas torch, which failed. After the combustion of the vinyl flooring was complete, its carbonized range was measured to be 600 mm in length and 380 mm in width, and the carbonized area was 1000 ㎟. Heat transformed the coated layer of surface of the carbonized vinyl flooring into a carbonized layer, which became harder. The analysis of cross-section of the boundary surface of the carbonized vinyl flooring using a stereoscopic microscope showed that the vinyl flooring was bubbling, and that the white boundary layer at the bottom of the coated layer had disappeared.

• Horticultural Science & Technology
• /
• v.16 no.1
• /
• pp.27-29
• /
• 1998

Artificial pollination (AP) and gibberellin A4+7 plus benzyladenine (promalin) were applied alone and together. AP was applied at 10% flowering time with 'Senshu' pollen (Malus domestica cv. Senshu). 12mg/L promalin was applied at 0, 10 and 20 days after falling of central flowers, respectively. In promalin treatment with or without AP application methods, fruit length, weight and length/diameter (L/D) were higher than those of control and AP. However, in AP and AP+ promalin application, the number of seeds and seed weight were higher than those of control and promalin. In AP+ promalin treatment, 78.6% fruits showed their uniform fruit shape and so significantly enhanced fruit uniformity compared to other treatments. Also cortex and core thickness of fruits were greater at the apex than that of other treatment. Fruit with L/D ratio over 0.87 were highly produced by applications of AP+promalin and promalin than control and AP only. 'Fuji' apples in good shape can be produced by using of AP + promalin together.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.3
• /
• pp.312-318
• /
• 1995

Residues of benfuresate in rice and oxolinic acid in Chinese cabbage were determined through the field experiments in order to establish the safe use and the maximum residue limit(MRL) of these pesticides in Korea. The herbicide benfuresate powder was sprayed into the paddy field with a level of 0.6kg(active ingredient)/ha and rice (Oryza sativa L.) was grown. At harvest, residues of benfuresate in brown rice and stem were analyzed using gas chromatograph. The residue of oxolinic acid in Chinese cabbage (Brassica campestris subsp. napus var pekinesis MAKINO) was analyzed using HPLC after foliar-spraying this fungicide into the cabbages at a level of 15kg/ha. The recovery efficiencies of benfuresate and oxolinic acid were 87-89% and 90-95%, respectively. The respective residues of benfuresate in rice and oxolinic acid in Chinese cabbage were in the range of 0.27-0.46 mg/kg and 0.23-1.53kg/kg. Residual concentrations of these pesticides in crops increased with the increased application frequencies, followed the first-order kinetics and linearly decreased with time. The highest residue of 1.53 mg/kg of oxolinic acid was observed when this fungicide was sprayed six times until three days prior to harvest, but this level was far lower t㏊n 5 mg/kg, which is the maximum residue limit(MRL) set by FAO/WHO.

• The Korean Journal of Pesticide Science
• /
• v.14 no.3
• /
• pp.272-279
• /
• 2010

KNF-1002, a new fungicide candidate, is very effective for protecting crops against plant diseases, but its curative activity against barley powdery mildew is negligible due to its weak penetrability into plant leaf. To select the most efficient activator and, at the same time, spreade-sticker, foliar uptake and deposit of aqueous spray formulations containing non-ionic or anionic surfactants and fatty acid alkyl esters as an adjuvant were assessed by using Congo Red method. In the absence of activator, only 0.1% of the applied active ingredient was absorbed by barley leaves 24 h after spraying with an aqueous acetone containing KNF-1002 100 mg/L. But, non-ionic surfactants (500 mg/L), such as heptaethylene glycol monooctadecenyl ether (OE-7), dodecaethylene glycol monohexadecyl ether (CE-12), so facilitated KNF-1002 uptake that the uptake was increased up to 48.5%. To wheat plant, the addition of surfactants in spray solution of KNF-1002 also increased the foliar uptake and deposition of active ingredient, but its efficiency varied according to the kind of fatty alcohol moiety of polyoxyethylene surfactant. KNF-1002 formulations containing nonaethylene glycol monododecyl ether (LE-9) as an activator and spreader-sticker showed remarkable increases of fungicidal activity against barley powdery mildew.

• Journal of Animal Environmental Science
• /
• v.14 no.1
• /
• pp.15-22
• /
• 2008

This study was carried out to investigate the effect of enzyme complex on odor emission from swine slurry and the process of making swine liquid manure. Ammonia and hydrogen sulfide concentrations were significantly decreased by using the enzyme complex of liter per ton level of liquid swine slurry in the manure storage tank according to the time. Characteristics of liquid swine slurry were affected by the enzyme complex, total nitrogen and ammonia nitrogen contents were reduced compare with control. Ammonia and hydrogen sulfide concentrations in the finishing pig building and offensive odor compound on the boundary line of swine farm were significantly decreased by spraying in swine finishing building. In conclusion, the results obtained from this study suggest that using the enzyme complex of liter per ton level of liquid swine slurry for making liquid swine manure may improve the quality of swine liquid fertilizer and reduce odor emission. Also farm scale enzyme complex treatment may improve air quality in finishing pig building and deduce offensive odor compound of swine farm.