• Korean journal of food and cookery science
• /
• v.20 no.4
• /
• pp.396-402
• /
• 2004

The aim of this study was to examine the effect of rice protein on the network structure of the Jeung-Pyun. The major component of Jeung-Pyun rice protein was extracted, the change of rice protein during the Jeung-Pyun fermentation was assessed, and the effect on the viscosity and volume of adding protease to Jeung-Pyun was investigated. In addition, the result of adding protein to rice starch on the viscosity and volume of Jeung-Pyun was that the rice protein mediated the volume and expansion ability. The results were as follows. In rice and dough of Jeung-Pyun, the SDS soluble protein content was higher than that of wheat flour and no change was detected in the amount of extracted protein with the fermentation time. However, in the FPLC pattern, low molecular weight peaks were decreased with the fermentation time, which indicates the increase in the ratio of high molecular weight substances. In contrast, the addition of protease substantially decreased, the viscosity and volume of Jeung-Pyun, whereas the viscosity and volume were increased by adding protein to rice starch in order to reconstitute Jeung-Pyun. This suggested that rice protein in Jeung-Pyun had a mediating effect on both the volume and the formation of the texture.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.151-160
• /
• 2001

Polymeric membranes consisting of poly(d,1-lactide) as a polymer matrix and crystallizable progesterone as a drug were prepared by coagulating polymeric solutions. The homogeneous casting solutions in dimethyformamide were solidified by using three different coagulating processes : solvent evaporation under vacuum, solvent extraction via immersion into the nonsolvent bath, or vapor exposure at high humidity condition. With solvent removal via evaporation under vacuum, the cast solution film was vitrified to form a homogeneous film containing progesterone of spherical shape distributed evenly in the film. Being prepared by solvent extraction via immersion into a water bath, the resulting membrane showed an asymmetric structure, with progesterone of big crystallites distributed unevenly in the structure. On the other hand, the coagulation under high humidity transformed the cast film into a sponge-like structure, where progesterone took a shape like flake.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.18.2-18.2
• /
• 2009

Ceramics have some properties that are unmatched by other kind of materials like metals or polymers. The ability of high thermal and chemical resistance and in case of being superior in specific mechanical properties makes the ceramic materials suitable for arange of applications. The microstructure and morphology of a material arguably permit the use of many advanced application otherwise difficult to achieve.Porous structures have some important applications in biomedical and environmental field. For human hard tissue reconstruction and augmentation procedure suitable biomaterials are used with a desirable porosity. A range of porous bioceramics were fabricated with tailored design to meet the demand of specific applications. Channeled and interconnected porosity was introduced in alumina, zirconia, and hydroxyapatite or tri calcium phosphate ceramics by different methods like multi-pass extrusion process, bubble formation in viscous slurry,slurry dripping in immiscible liquid, sponge replica method etc. The detailed microstructural and morphological investigations were carried out to establish the unique features of each method and the developed systems. For environmental filters the porous structures were also very important. We investigated a range of channeled and randomly porous silicon based ceramic composites to enhance the material stability and filtration efficiency by taking advantage of the material chemistry of the element. Detailed microstructural and mechanical characterizations were carried out for the fabricated porous filtration systems.

• Natural Product Sciences
• /
• v.10 no.6
• /
• pp.277-283
• /
• 2004

Psammaplin A (PSA), a naturally occurring biophenolic compound has been demonstrated to deliver significant cytotoxicity to many cancer cell lines. In this article, we investigated the effect of PSA on cell cycle progression of lung cancer cells (A549). It was found that PSA could slightly perturb the cell cycle progression of A549 cells and lead to the cell cycle arrest at G2/M phase, indicating PSA might disturb the mitosis process of A549 cells. In addition, inspired by the two phenolic groups in the structure of PSA, the antioxidant activity of it has been evaluated. Although PSA was weak in scavenging the stable free radical 1,1-diphenyl-2-picrylhyrazyl (DPPH), it showed stronger ABTS radical scavenging activity than ascorbic acid in TEAC assay. Furthermore, it was found that PSA could effectively prevent DNA strand scission induced by oxidative stress. These results suggest that PSA have both cell cycle regulation and antioxidant activities. Herein, we suggest that PSA would be a very interesting and promising candidate to be developed as a multi-function drug.

• Journal of the Korea Furniture Society
• /
• v.27 no.4
• /
• pp.343-351
• /
• 2016

This study was jointly conducted by the department of nursing science in a college of natural sciences and the furniture design department in the art and physical education to research the critical factors for the furniture development for the Elderly in consideration of the surging number of senior citizens not only in Korea but also globally. On the basis of the Elderly's physical and mental characteristics investigated by the department of nursing science, the furniture design guideline for the Elderly was presented. The following points should be considered at designing the furniture for the Elderly. First, multiple functions like chair with removable toilet bowl and part lighting in bed are advantageous. Second, the dimension of furniture such as chair, bed and sofa should be ergonomically thought in terms of structure for the Elderly's convenience. Third, the bright and vivid color of furniture should be chosen from the aspect of the design, while the different kinds of blue should be avoided. Small patterns and high glossy are not recommendable, but various kinds of feelings in different shapes are suggested. Forth, the material should contribute to the fracture prevention and for that sponge, fabric and leather smoothing the surface of furniture are recommendable as the finishing treatment in a wide variety of colors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.353-356
• /
• 1997

Hydraulically driven manipulators are superior to electrically driven ones in the power density and electrical insulation. But an electro-hydraulic manipulator using hydraulic actuators has many nonlinear elements, and this parameter fluctuations are greater than those of electrically driven manipulator. So this is relatively difficult to realize not only stable contact work but also accurate force control for the autonomous field task such as the maintenance task of high voltage active electric line or the automatic excavation task by hydraulic excavator. In this report, we propose robust force control algorithm, which can be applied to there real field task such as the construction field, nuclear plant and so on. Proposed force controller has the same structure as that of disturbance observe for position control. The difference between force and position disturbance observer is that the input and output of disturbance observer are forces in the case force disturbance observer and the plant varies much compared to the case of position control. In the design of force disturbance observer, generalized plant is derived and the stabilized filter is designed by H infinity control theory to ensure the robuts t stability even though the stiffness of environment changes from sponge to steel, and the contact surface also changes from flat to round shape. Experimental results show that highly robust force tracking by a 6-link electro-hydraulic manipulator could be achieved under various environment conditions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.6
• /
• pp.754-760
• /
• 1996

Effects of washing and additives on the texture of squid surimi gel which has been known to hard to gelation due to high protease activities and many water solubles were studied by SDS-PAGE, compression test, jelly strength and transmission electron microscopy analysis (TEM). Myosin (205 kDa) heavy chain was the major protein in water soluble fractions. It was impossible to make a gel after washing of the minced squid meat. These results suggested that squid (Todarodes pacificus) minced meat does not need a washing for good jelly products. $3.0\%$ of bovine plasma protein (BPP) produced the hardest gel ($16\%$ harder than the control) among the additives including egg white (EW), potato extracts (PE) and transglutaminase-K (TG-K) by compression test (P>0.05). Microstructure of control, $2\%$ EW and $4\%$ TG-K treated gels showed a sponge-like structure with more vacant space. Gels containing $3\%$ BPP formed the most rigid and arranged networks. Those results indicates that poor gel-network formation Was due to the degradation of myofibrillar proteins by proteases contained in the minced meat, which result in non-interlinkage.

• Journal of Periodontal and Implant Science
• /
• v.27 no.1
• /
• pp.263-290
• /
• 1997

Homogenization technique is employed to investigate the series of stress analyses of mandible for three different types of dental implants. This technique helps to make proper material model of bone and analyze such a non homogeneous structure at the level of individual microstructural unit. The stress analyses with homogenization technique show much higher stress level in the sponge bone, compared to those of conventional FEM. It also manifested that even a minor lateral force results in crucial stresses in the dental implant system and that the macroscale model should take the shape and size after real mandible to produce reasonable solution in the analyses of dental implant systems. The shapes of dental implants simulated in this study are rectangular-cross-sectioned type, hemi-sphere rooted type, and wedge type implant. The stress states of mandible with hemisphere rooted type implant and wedge type implant show similar levels, while those with sectioned rectangular implant results in higher stresses. It is suggested that the distance between the implant tip and cortical bone be kept far enough to prevent stress concentrations in the mandible.

• 보존과학연구
• /
• s.13
• /
• pp.37-58
• /
• 1992

Iron artifacts from Busǒ Sansǒng inffered to late Baikjae periodwere studied on the aspects of metallugy. These materials were the largest size ever since excavated. From the analytical results these artifacts were found to be pureiron system without impurities or hypo-eutectoid steel system in below 0.3% in carbon contents. From the content of phosphorus in the range of 0.03∼0.05% as aim purity it was shown that charcoal were used for making these iron artifacts from sponge iron not fusion method. By observing metallugical structure it was found that iron artifacts was manufactured by repetitive folding and hammering forging method and some by heating method for adding carbon with cool water. This method were to improve the quality of the soften steel to harden one. In addition to those above repetitive hammering method eliminated the nonferrous materials such as slag inclusion and remained relatively pure ferrite.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.349-350
• /
• 2012

Porous silicon (PS) was prepared by electrochemical anodization. Ultra-thin zinc oxide (ZnO) capping layers were deposited on the PS by plasma-assisted molecular beam epitaxy (PA-MBE). The effects of the ZnO capping layers on the properties of the as-prepared PS were investigated using scanning electron microscopy (SEM) and photoluminescence (PL). The as-prepared PS has circular pores over the entire surface. Its structure is similar to a sponge where the quantum confinement effect (QCE) plays a fundamental role. It was found that the dominant red emission of the porous silicon was tuned to white light emission by simple deposition of the ultra-thin ZnO capping layers. Specifically, the intensity of white light emission was observed to be enhanced by increasing the growth time from 1 to 3 min.