• Title/Summary/Keyword: Sponge iron

Search Result 19, Processing Time 0.026 seconds

Iron storage disease (ISD) with concurrent hepatic lipidosis (HL) in a mynah (Gracula spp.)

  • Lee, So-Young;Yoo, Jong-Hyun;Park, Chul;Kang, Byeong-Teck;Kim, Dae-Young;Park, Hee-Myung
    • Korean Journal of Veterinary Research
    • /
    • v.48 no.4
    • /
    • pp.489-492
    • /
    • 2008
  • An 8-year-old male mynah (Gracula spp.) was presented for depression, anorexia, and respiratory distress. The patient's diet consisted of sponge cake and yogurt alone. Physical examination revealed high body condition score (4/5), abdominal distention, and severe orthopnea. Hepatomegaly was observed on abdominal radiographs. The patient died 4 h after presentation, and severe hepatomegaly was observed at necropsy. Based on histopathological findings, the bird was definitively diagnosed with iron storage disease with concurrent hepatic lipidosis.

Current Status of Titanium Smelting Technology for Powder Metallurgy (분말야금을 위한 타이타늄 제련기술 현황)

  • Sohn, Ho-Sang
    • Journal of Powder Materials
    • /
    • v.28 no.2
    • /
    • pp.164-172
    • /
    • 2021
  • Titanium is the ninth most abundant element in the Earth's crust and is the fourth most abundant structural metal after aluminum, iron, and magnesium. It exhibits a higher specific strength than steel along with an excellent corrosion resistance, highlighting the promising potential of titanium as a structural metal. However, titanium is difficult to extract from its ore and is classified as a rare metal, despite its abundance. Therefore, the production of titanium is exceedingly low compared to that of common metals. Titanium is conventionally produced as a sponge by the Kroll process. For powder metallurgy (PM), hydrogenation-dehydrogenation (HDH) of the titanium sponge or gas atomization of the titanium bulk is required. Therefore, numerous studies have been conducted on smelting, which replaces the Kroll process and produces powder that can be used directly for PM. In this review, the Kroll process and new smelting technologies of titanium for PM, such as metallothermic, electrolytic, and hydrogen reduction of TiCl4 and TiO2 are discussed.

Metallugical Study on the Iron Artifaets Ecavated from Buso Sangong (부소산성 출토 고대 철기유물에 대한 금속학적 연구)

  • Im, Seon-Gi;Gang, Dae-Il;Mun, Hwan-Seok;Park, Dong-Gyu;Gang, Seong-Gun
    • 보존과학연구
    • /
    • s.13
    • /
    • pp.37-58
    • /
    • 1992
  • Iron artifacts from Busǒ Sansǒng inffered to late Baikjae periodwere studied on the aspects of metallugy. These materials were the largest size ever since excavated. From the analytical results these artifacts were found to be pureiron system without impurities or hypo-eutectoid steel system in below 0.3% in carbon contents. From the content of phosphorus in the range of 0.03∼0.05% as aim purity it was shown that charcoal were used for making these iron artifacts from sponge iron not fusion method. By observing metallugical structure it was found that iron artifacts was manufactured by repetitive folding and hammering forging method and some by heating method for adding carbon with cool water. This method were to improve the quality of the soften steel to harden one. In addition to those above repetitive hammering method eliminated the nonferrous materials such as slag inclusion and remained relatively pure ferrite.

  • PDF

A study on Titanium Hydride Formation of Used Titanium Aircraft Scrap for Metal Foaming Agents

  • Hur, Bo-Yong;Ahn, Duck-Kyu;Kim, Sang-Youl;Jeon, Sung-Hwan;Park, Su-Han;Ahn, Hyo-Jun;Park, Chan-Ho;Yoon, Ik-Sub
    • Proceedings of the IEEK Conference
    • /
    • 2001.10a
    • /
    • pp.209-212
    • /
    • 2001
  • Aircraft industry is developed very fast so titanium scrap was generated to manufacture. Titanium scrap was wasted and used to deoxidize cast iron so we are study recycling of it. In this research were studied that metal hydride of reacted in hydrogen chamber of AMS4900, 4901, return scrap titanium alloy and sponge titanium granule. The temperature of hydrogenation was 40$0^{\circ}C$ in the case of pure sponge titanium but return scrap titanium alloy were step reaction temperature at 40$0^{\circ}C$ and 50$0^{\circ}C$, and after the hydride of titanium alloy were crushed by ball mill for 5h. Titanium hydride contains to 4wt.% of hydrogen theoretically as theory. It was determined by heating and cooling curve in reaction chamber. The result of XRD was titanium hydride peak only that it was similar to pure titanium. Titanium hydride Powder particle size was about 45${\mu}{\textrm}{m}$, and recovery ratio was 95w% compared with scrap weight for a aluminum foam agent.

  • PDF

A Study on Iron Manufacturing and Technology through Analysis Reports of Iron artifacts in the Baekje Area (유물분석 자료를 통한 백제지역의 제철과 철기 제작기술 연구)

  • Kim, Soo-Ki
    • Journal of Conservation Science
    • /
    • v.30 no.4
    • /
    • pp.335-343
    • /
    • 2014
  • This study classified the result of non-metallic inclusion analysis and result of microstructure investigation on the ironware excavated in the Baekje region into Han River, Geum River, and Yeongsan River to estimate the iron making temperature and study the characteristics of regional and temporal characteristics of the heat treatment technology and steel making technology. Regardless of era, bloom iron and sponge iron are judged to be the major method for making as a directreduction process in all three regions. The result of the reinterpretation of the non-metallic inclusion by the oxide ternary constitutional diagram suggest that the temperature inside of the furnace is estimated to be between $1,100{\sim}1,300^{\circ}C$ while making the steel. The magnetic iron ores are the major raw material of steel ore and irons with high $TiO_2$ are estimated to use iron sands. Ironware with $CaO/SiO_2$ rate higher than 0.4% are considered to have artificially added the flux of calcareous materials. It was found that the iron making method is the solid caburizing-steel which caburizes low-carbon steels by the CO gas and $CO_2$ gas created when heating the forging furnace with charcoal. Also, the ironware manufacturers in the Baekje during 3rd century recognized the heat treatment technology as they performed carburizing process and quenching to intentionally increase the strength of necessary parts.

Current Status of Titanium Recycling Technology (타이타늄의 리사이클링 기술 현황)

  • Sohn, Ho-Sang
    • Resources Recycling
    • /
    • v.30 no.1
    • /
    • pp.26-34
    • /
    • 2021
  • Titanium is the fourth most abundant structural metal, after aluminum, iron, and magnesium. However, it is classified as a 'rare metals', because it is difficult to smelt. In particular, the primary titanium production process is highly energy-intensive. Recycling titanium scraps to produce ingots can reduce energy consumption and CO2 emissions by approximately 95 %. However, the amount of metal recycled from scrap remains limited of the difficulty in removing impurities such as iron and oxygen from the scrap. Generally, high-grade titanium and its alloy scraps are recycled by dilution with a virgin titanium sponge during the remelting process. Low-grade titanium scrap is recycled to ferrotitanium (cascade recycling). This paper provides an overview of titanium production and recycling processes.

Effect of Scrap Impurities on Microstructure and Mechanical Properties of Zr Alloys (스크랩 불순물이 Zr 합금의 미세조직 및 기계적 특성에 미치는 영향)

  • Jeong, Gu Beom;Kim, In Won;Song, Jae Sook;Shin, Pyung Woo;Hong, Sun Ig
    • Journal of Korea Foundry Society
    • /
    • v.36 no.3
    • /
    • pp.81-87
    • /
    • 2016
  • In this study, the effect of scrap ratio on the mechanical properties of Zr alloys was studied. Oxygen content in the ingot cake increased rapidly with increasing fraction of scrap, which can be attributed to the surface oxide of scrap including small pieces of turning, chips, etc. Iron content did not increase much with the increasing addition of scrap, suggesting scrap materials was well reserved in the iron-free container. As-cast structure of Zr alloy with the scrap:sponge ratio displayed plate/or needle ${\alpha}$ phase and no appreciable change of the cast structure was observed with change of scrap fraction. The strength increases with increasing fraction of scrap, which can be attributed to the increase of oxygen content. The ductility decreased slightly with increase of scrap fraction. Dislocation-oxygen interaction is known to increase the strength at the expense of ductility. Ingot cake with intentionally added $Fe_2O_3$ exhibited the drastic decrease of the formability, even exhibited the brittle fracture behavior during rolling. The oxidation resistance, however, increased with the increase of scrap fraction because of high oxygen content, which may prevent more penetration and diffusion of oxygen into matrix.

Analysis and Separation of Constituent Materials of Old Car by Shredding Process (폐자동차 파쇄를 통한 주요구성물질의 분리 및 분석평가)

  • Lee Hwa-Young;Oh Jong-Kee;Kim Sung-Gyu
    • Resources Recycling
    • /
    • v.11 no.4
    • /
    • pp.11-16
    • /
    • 2002
  • Analysis and separation of constituent materials of old car have been performed by using the industrial shredding line. For this aim, three old cars made by domestic automobile manufacturers, Sonata II, Sephia and Prince were chosen and delivered in pressed form without engine, tires and doors, etc. Shredding line was substantially composed of pre- and main-shredder. cyclone, magnetic separation, eddy current separation and man-power separation. From the separation of shredder products, iron scrap was observed to be the major material of old car accounting for 60.1 % of total weight and non-ferrous metals involving Al, Cu and Zn, etc. were about 2%. Light fluff, about 90% of total fluff product, was comprised with plastic, fiber and sponge, etc. and the fraction of 5 cm undersize in light fluff was 70.5%. In case of heavy fluff, however. rubber and plastic were found to be the major constituent materials of it. Among the constituent materials of fluff, plastic showed the highest calorific value, more than 10,000 cal/gr and leather and rubber showed relatively high chlorine content, 10.3 and 2.55 wt%, respectively.

A study of the destructive styles from Contemporary Paintings - Focused on distinguishing enmity-destruction and self-destruction - (현대회화에서 드러난 해체의 형식론에 관한 연구 -타의적 해체와 자의적 해체의 성격규정을 중심으로-)

  • Park Ki-Woong
    • Journal of Science of Art and Design
    • /
    • v.7
    • /
    • pp.5-63
    • /
    • 2005
  • Generally, the meanings of destruction are related in the meaning of demolition, breakdown, into fragments ... and so on, and the similar meanings are twist, crush, demolish, split, cut, into pieces , break up ... etc. Further, it has related in the cruelty and destructive heart which are linked with orgy, Sadism, Necrophilia and so on. The meanings are also expressed by the initial , which are deprivation, deface, defame, deform, degrade, delegitimize, denounce , deride, destroy, devalue, as well as debase, debunk, declaim, declassify, decry, delete, denigrate, deprecate, despise or detract ...and so on. Dario Gamboni has discussed the meaning in his book as two categories Iconoclasm and Vandalism. And the similar meanings could be found in the words which has the initial of , like abase, abate, abhor, abjure, abolish, abridge, abuse ...and so on. Even though the distinct meanings of Iconoclasm and Vandalism, it is not easy to distinguish clearly between the differences when the results are accomplished in contemporary paintings because of the similarity of the results. In korean vocabulary there are no similar words to distinguish between the meanings of destruction and deconstruction, and the deconstruction is not recorded in the general dictionaries. However the meaning of is diminishing, separation, contrast and so on. So the unification of the word as do-construction is not construct, minus construction, reverse construction. And Vincent Ditch explained that there are the meaning of destroy the text. From Jacques Derrida, the deconstruction strategy is to criticise the world of traditional metaphysics and logocentrism, and not to reconstruire the philosophical meaning of texts but $d\'{e}construire$ them. And Saussure emphasized that the signifers could have more meaning that there can be more signified in traditional texts in the art. as a result, deconstruction is explained that there are many signified meanings in a signifer. In this thesis , from using the meanings of destruction and deconstruction, to distinguish the expressive skills in contemporary art works are arising. Therefore, special methods which are linked in the destruction styles are selected. As a result, the two different purposes of destruction is arising, one is enmity destruction and the other is self destruction another word, auto destruction or destruction to create The enmity destruction can be distinguished by the two category Iconoclasm and Vandalism. They come from the moment of different historical aspect is arising and want to attack the Icon or masterpiece this concept is from the study of John Philips and especially iconoclasm is linked with religious and artistic heart, but Vandalism is come from the political attack. Sometime, this distinguish is not clearly arising, because the two aspects are co-related in the attack. As a result, firstly, the Iconoclastic controversy had arisen in the methods of Dadaism which has developed by Man Ray, Francis Picabia and Marcel Duchamp. They want to attack the pre-established master-pieces and painting spaces, and they had 'non-artistic attitude' not to be art. Since 1980, the German artist Anselm Kiefer adapted the methods and made them his special skills so he had tried to paint tough brush strokes and draw with hugh pallette image line and fire and water images , they can be the image attack as the Iconoclasm. secondly, the model of vandalism is to be done by hammer, drill, canon and so on. the method is to attack the content of painting. Further, the object of destruction is bound by cords and iron lings to demolish or to declare the authority of pre-statues; it symbolize the pre-authority is gone already. Self-destruction based paintings are clearly different in the purpose of approaching the art work. First of all, they can be auto-destruction, creative destruction and metamorphosis destruction, which is linked with the skill the material aspect and basic stature, and sign destruction or signifier destruction, which is link with the inner meaning destruction that is considered as the Semiotical destruction in post-modern paintings. Since 1960, the auto destruction is based on the method of firing, melting, grinding and similar skills, which is linked with Neo-Dada and reverse-assemblage. Metamorphosis destruction is strongly linked with the basic inner heart price and quality, so it can be resulted in the changedness of expectation and recognition. Tony Cragg has developed the skills to metamorphose the wood as stone or iron as cloth and stone as sponge and rubber and so on. The researcher has developed the same style in the series of since 2003. The other self-destructive methods are found in the skill of sign destruction. In the methods the meaning of the art is not fixed as one or two, but is developed multi-meaning and differ from original starting situation, so Jacques Derrida called the difference meaning in deconstruction. It is the destruction of textes. These methods are accomplished by David Salle, Francesco Clemente, and recently Tracy Emin, who has developed the attacking heart in the spectators' emotion. Sometime in the method of self-destruction, it is based on horror and shock, the method is explored by Demian Hirst and Jakes and Dinos Chapman. Their destructive styles stimulate ambivalent heart and destroy original sign of girl and animals.

  • PDF