References
- R. W. Cahn, P. Hassen and E. J. Kramer, Materials Science and Technology, "A Comprehensive Treatment, Structure and Properties of Non-Ferrous alloys", 8 (1996) 436.
- Hong SI and Lee KW, J. Nucl. Mater., "Stress-induced reorientation of hydrides and mechanical properties of Zircaloy-4 cladding tubes", 340 (2005) 203-208. https://doi.org/10.1016/j.jnucmat.2004.11.014
- Park KT, Kim SH, Hong SI, Choi MS, Cho NC, Ryu WJ and Lee JH, J. of Korean Inst. of Resources Recycling, "Overview of Zirconium Production and Recycling Technology", 21 (2012) 18-30. https://doi.org/10.7844/kirr.2012.21.5.18
- Nuclear Zirconium Alloy Market, Ux Consulting, "Microstructure and Deformability of Cast Zr-Nb-Fe-O alloy with High Iron and Oxygen Content" (2010).
- Lee SY, Kim KT and Hong SI, J. Nucl. Mater., "Circumferential creep properties of stress-relieved Zircaloy-4 and Zr-Nb-Sn-Fe cladding tubes", 392 (2009) 63-69. https://doi.org/10.1016/j.jnucmat.2009.03.045
- Jeong GB, Shin PW and Hong SI, Advanced Materials Research, "Effect of scrap:sponge ratio on mechanical and corrosion properties of Zr-1Nb-0.7Sn-0.1Fe alloy", 977 (2014) 94-98. https://doi.org/10.4028/www.scientific.net/AMR.977.94
- N. S. Gamba, I. A. carbajal-Ramos, M. A. Ulla, B. T. Pierini and F. C. Gennari, J. Alloys and Compounds, "Zirconium alloys produced by recycling zircaloy tuning", 578 (2013) 553-558. https://doi.org/10.1016/j.jallcom.2013.07.025
- Chang KI and Hong SI, J. Nucl. Mater., "Effect of sulphur on the strengthening of a Zr-Nb alloy", 373 (2008) 16-21. https://doi.org/10.1016/j.jnucmat.2007.04.045
- Hong SI and Kim HJ, Materials Science and Engineering., "Temperature dependence of elongation in Zircaloy-4", 86 (1987) L1-L4. https://doi.org/10.1016/0025-5416(87)90457-5
- Hong SI, Ryu WS and Rim CS, J. Nucl. Mater., "Thermally activated deformation of Zircaloy-4", 120 (1984) 1-5. https://doi.org/10.1016/0022-3115(84)90165-X
- Hong SI, Materials Science and Engineering., "Influence of dynamic strain aging on the dislocation substructure in a uniaxial tension test", 79 (1986) 1-7. https://doi.org/10.1016/0025-5416(86)90380-0
- Hong SI, Lee KW and Kim KT, J. Nucl. Mater., "Effect of the circumferential hydrides on the deformation and fracture of Zircaloy cladding tubes", 303 (2002), 169-176. https://doi.org/10.1016/S0022-3115(02)00814-0
- Jeong GB, Kim IW and Hong SI, J. Nucl. Mater., "Influence of microstructure modification on the circumferential creep of Zr-Nb-Sn-Fe cladding tubes", 468 (2016) 171-177. https://doi.org/10.1016/j.jnucmat.2015.11.029
- Kim IW and Hong SI, Met. Mater. Int., "Effect of Heat Treatment on the Creep Properties of Zr-1Nb-0.12O Nuclear Cladding Tubes", 22 (2016) 216-221. https://doi.org/10.1007/s12540-016-5478-y
- Hong SI, Song JS and Kim HS, Scripta materialia, "Thermomechanical processing and properties of Cu-9Fe-1.2Co microcomposite wires", 35 (2001) 1295-1300.
- Kim BH, Seo JH and Park KC, J. Korea Foundry Society, "The Effect of Al and Sn Additions on Corrosion Behavior of Permanent Mold Casting Magnesium alloy", 35 (2015) 36-43. https://doi.org/10.7777/jkfs.2015.35.2.036
- Kim KJ, Lim SG, Ju HK and Pak SJ, J. Korea Foundry Society, "Effect of Austenitizing Ratio on the Delta ferrite Volume Fraction and Corrosion Resistance of Shell Mold Cast SSC13 Elbow Fitting", 35 (2015) 109-113. https://doi.org/10.7777/jkfs.2015.35.5.109