• 한국강구조학회 논문집
• /
• 제15권5호통권66호
• /
• pp.541-549
• /
• 2003

고력볼트 인장접합 형신인 Split Tee 접합은 접합부의 효율성과 시공성이 우수하여 유럽등지에서는 중저층의 건축물에 많이 적용되고 있으나 국내에서는 널리 사용되지 않은 상황이다. 이는 고력볼트와 Split Tee를 구성하는 판재의 강성에 따라 지레작용의 효과를 포함하는 보트의 인장 전단파괴와 Split Tee의 송성파괴가 상호작용을 일으켜 해석과 설계가 복잡하다는 점과 시공상의 정밀도 확보가 쉽지 않기 때문이다. Split Tee접합에 관한 연구는 미국, 일본, 유럽등지에서 다양한 방법으로 진행되고 있지만 국내의 경우 아직 초보적 단계에 머물고 있다. 본 연구에서는 실험을 통한 Split Tee접합부의 거동, 즉 지레작용의 영향과 그에 따른 반력작용의 특성을 파악하여 Split Tee접합 설계를 하는데 있어 기초 자료를 제공하고자 한다.

• Computers and Concrete
• /
• 제24권3호
• /
• pp.249-258
• /
• 2019

In order to investigate the strength recovery of fire-damaged concrete after post-fire curing, concrete specimens were heating at $2^{\circ}C/min$ or $5^{\circ}C/min$ to 400, 600 and $800^{\circ}C$, and these exposed specimens were soaked in the water for 24 hours and following by 29-day post-fire curing. The compressive strength and split tensile strength of the high-temperature-exposed specimens before and after post-fire curing were tested. The proportion of split aggregate in the split surfaces was analyzed to evaluate the mortar-aggregate interfacial strength. After the post-fire curing process, the split tensile strength of specimens exposed to all temperatures was recovered significantly, while the recovery of compressive strength was only obvious within the specimens exposed to $600^{\circ}C$. The tensile strength is more sensitive to the mortar-aggregate interfacial cracks, which caused that the split tensile strength decreased more after high-temperature exposure and recovery more after post-fire curing than the compressive strength. The mortar-aggregate interfacial strength also showed remarkable recovery after post-fire curing, and it contributed to the recovery of split tensile strength.

• Advances in concrete construction
• /
• 제1권3호
• /
• pp.215-225
• /
• 2013

The results of experimental testing of the effect of confined concrete on compressive strength and ductility of concrete beam subjected to pure bending are presented. The effect of different stirrups forms and spacing, as well as different concrete strengths, on beam carrying capacity and ductility were analyzed. Ultimate strength capacity and deflection of concrete beam increase with the decrease in stirrups spacing. Stirrup form has a great effect on the ultimate carrying capacity and ductility of concrete beam. Stirrups which confined the region of concrete in the compression more contribute to greater compression strength of concrete than common stirrups at the perimeter of the entire cross-section of the beam.

• 한국도로학회논문집
• /
• 제19권5호
• /
• pp.33-42
• /
• 2017

PURPOSES : The purpose of this study is to suggest the construction and quality control method for the re-repair of a deteriorated partial depth repair for sections of Portland cement concrete pavement. METHODS : An experimental construction was conducted to extend the repair width for removing an existing repair section. A removal method was used to ensure early performance for a deteriorated partial depth repair section. Bond strength and split tensile strength were measured at the near vertical interface layer between the existing pavement and repair material. The area was analyzed for various conditions such as the extended repair area and the removing method of the existing repair section. RESULTS : As a result of analysis of bond strength and split tensile strength, the bonding performance of a milling removed section was improved over a cutting and hand breaker removed section. The bond strength was analyzed to increase slightly as the extended repair width for removing the existing repair section increased. The split tensile strength did not show a clear relationship to an increased extended repair width of an existing removed repair section. CONCLUSIONS : The milling removal method should be applied in the removal of existing deteriorated partial depth repair sections. The extended repair width for a re-repair section should be wider than the existing partial depth repair with at least a 75-mm length and width for the bond strength and the split tensile strength.

• 한국강구조학회 논문집
• /
• 제24권5호
• /
• pp.511-520
• /
• 2012

상 하부 스플릿 T 접합부는 부분강접 접합부의 한 형태로 접합부에 사용된 T-stub의 두께 및 고력볼트 게이지 거리 변화에 따라서 충분한 휨강도를 갖는다. 뿐만 아니라 상 하부 스플릿 T 접합부는 강재의 종류, 보 및 기둥의 규격, 접합부 형상 등의 조합에 의하여 보통모멘트골조 혹은 특수모멘트골조에 적용 가능한 충분한 연성능력을 갖는 내진접합부로 설계 및 시공 된다. 그러나 이러한 상 하부 스플릿 T 접합부에 대한 국내의 연구는 아직 미흡한 상황이며 적합한 설계식의 제안도 이루어지고 있지 않다. 그러므로 상 하부 스플릿 T 접합부의 국내 적용을 위해서는 많은 실험 및 해석적 연구가 필요한 상황이다. 따라서 이 연구는 FEMA의 상 하부 스플릿 T 접합부에 대한 설계식을 검토하고 국내의 적용 가능성을 타진하고자 진행하였다.

• 한국재난정보학회 논문집
• /
• 제14권4호
• /
• pp.466-473
• /
• 2018

연구목적: 최근에는 지진에 대한 안정성을 위해 면진 또는 면진과 내진을 병용하는 추세로 가고 있는데, 신축할 중 저층 RC 구조물에 콘크리트 구 기초(CSF)를 설치하는 형태의 시스템을 사용할 때 기초로 사용할 콘크리트 구의 할열특성을 파악하고자 한다. 연구방법: 압축강도 60Mpa인 고강도 콘크리트 구의 할열강도를 알기 위하여 다양한 실험을 수행하고, 표준 실린더 공시체의 할열강도에 대한 구 공시체의 할열강도 비 및 구의 직경변화에 따른 치수효과 등을 실험적으로 구하고자 한다. 연구결과: 150mm 구 공시체의 할열강도는 $150mm{\times}150mm$, $150mm{\times}300mm$의 원주형 공시체 보다 작을 것으로 예상했으나, 실험결과는 각각 3.8%, 13.7% 큰 4.39Mpa로 나타났는데 이는 구 공시체의 점하중과 원주형 공시체의 선하중에 대한 내력작용이 다르기 때문이라 판단된다. 결론: 원주형 공시체에 대한 할열 인장강도는 많은 연구가 진행되어 표준화된 방법이 있으나, 구 공시체의 할열강도에 대한 연구는 보고된 바가 거의 전무하여 본 연구에서는 직경 50mm~150mm의 할열강도 특성을 파악하고, 그 방법을 확립하여 콘크리트 구의 할열강도 및 관련 연구에 대한 기본 자료를 제공하고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.675-678
• /
• 2003

Experimental results for variation of concrete strength according to vibration time control for fresh concrete were given. Vibration velocity, time before vibration and vibrating time were used as experimental parameters. Compressive strength, split tensile strength, ana bond strength were investigated and then fracture surfaces of split tensile strength specimen were observed. From the experimental results, it could be concluded that there may be no decrease in concrete strengths if time before vibration will be sustained at least for more than 3 hours.

• 한국해양공학회지
• /
• 제22권2호
• /
• pp.42-49
• /
• 2008

Recently many countries have become interested in the development of cold or arctic regions. The construction of engineered structures in those regions demands an understanding of the deformation characteristics of frozen soil. However, an understanding of frozen soil behavior poses difficult problems owing to the complex interaction between the soil particles and the ice matrix. In this research, a series of laboratory tests was performed to investigate the variations in the unconfined compression strength and split tensile strength of weathered granite soil and mixed soil (standard sand and kaolinite) in 15 degrees below zero environments. In the frozen soil tests, specimens were prepared with various water and clay contents, and then the interrelationships between four factors (water content, clay content, unconfined compression strength, split tensile strength) were analyzed. The test results were summarized as follows; as the water content was increased, the unconfined compressive and split tensile strengths also increased in frozen soil. However as the clay content was increased, the unconfined compressive and split tensile strengths were lowered. In the case of frozen soil that contained little clay content, the strength decreased rapidly in mixed soil (standard sand and kaolinite) when the frozen specimen was broken. On the other hand, in the cases of mixed soil that contained a high clay content and weathered granite soil, the strength decreased relatively slowly.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.343-348
• /
• 2018

This paper reports mechanical behavior of recycled fine aggregate concretes after high temperatures. It is found that compressive strength of recycled fine aggregate concretes decline significantly as the temperature rises. The elastic modulus of recycled fine aggregate concretes decreases with the increase in temperature, and the decrease is much quicker than the decrease in compressive strength. The split tensile strength of recycled fine aggregate concrete decrease as the temperature rises. Through the regression analysis, the relationship of the mechanical behavior with temperature are proposed, including the compressive behavior, elastic modulus and split tensile strength, which are fitting the test data.

• 한국농공학회지
• /
• 제30권2호
• /
• pp.82-94
• /
• 1988

The purpose of this study is to introduce the Double Punch test method which is an indirect testing method of tensile strength of concrete, and to compare with the tensile strength of concrete as determined by the split-cylinder test, a practical method for performing the Double Punch test to obtain the tensile strength of concrete is proposed and recommended for general use. In this study, the dimensions of cylindrical specimens used in the Double-Punch test were 15X30cm, 15X15cm, 10${\times}$(20cm, and 5${\times}$l0cm, and in the split-cylinder test were 15${\times}$(30cm, 15${\times}$(15cm, and 10${\times}$(20cm. And the diameters of loading punches used in the Double-Punch test were 1.5cm, 2.5cm, and 3.5 cm. The results obtained from tests are summarized as follows ; 1. In the split-cylinder test, the tensile strength of concrete by the linear elasticity theory is similar to that of plasticity theory. 2. Both split-cylinder test and Double-Punch test, tensile strength of concrete is increased with decreasing specimen size. This tendency is identical when the ratio of specimen diameter to height is 1: 2, but that tendency is quite different when the ratio is 1: 3. In the Double-Punch test, if specimen size is constant, by increasing the punch size, tensile strength of concrete is increased, too. 4. Using a 15 ${\times}$( 15 cm cylinder specimen and 3.5 cm diameter punch in the Double Punch test would give the most uniform and consistent result in tensile strength, and the result showed a gQod correlation with splitting tensile strength from 15 x 30cm specimen. 5. In order to obtain satisfactory results and to nuninuze variability, it is proposed that specimens of 15 cm in diameter and 15 cm in height with two 3.5 cm diameter punches should be used. It seems, therefore, reasonable tt) take f't=0.0024 P(kg / cm$^2$) as a working formula for computing the tensile strength in the Double Punch test for concrete.