• 한국자기공명학회논문지
• /
• 제14권1호
• /
• pp.38-44
• /
• 2010

In liquids NMR, $^{1}H$ is the most widely observed nucleus, which is not the case in solids NMR. The reason is due to the strong homo-dipolar interactions between the hydrogen atoms which mask the useful chemical shift information. Therefore we must remove the strong homo-dipolar interactions in order to get structural information, which can be investigated by the isotropic chemical shift. There are two ways of obtaining it. One is the ultra-fast MAS of ca. 70 kHz spinning speed, which has become available only recently. The other way is devising a pulse sequence which can remove the strong homo-dipolar interaction. In the latter way, MAS with a moderate spinning rate of a few kHz, is enough to remove the chemical shift anisotropy. In this report, 1D-CRAMPS and 2D MASFSLG techniques are utilized and their results will be compared. This kind of highresolution $^{1}H$ NMR for solids, should become a valuable analytical tool in the understanding and the developing of a new class of hydrogen storage materials. Here ammonium borane $-NH_{3}BH_{3}$, whose hydrogen content is high, is used as a sample.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.563-565
• /
• 1999

In this paper, we control attitude of an unstructured object with gyro actuator. It is well known that the attitude control of an object hanging with wire is not easy using usual actuators. Even though an actuator such as a fan can be used for control of the object, it is difficult to meet a desired control objectives. We, because of these reasons, make a gyro actuator with two motors. The first motor is responsible for spinning the wheel at high speed and the second motor is used to turn the inner gimbal. Applying the torque to the second motor, which results in the turn of the outer gimbal, torque about the vertical axis will be obtained while the wheel of the gyro is spinning constantly. This torque is used to control the attitude of the object attached. Gyro actuator utilize control unstructured object such as I-beam carrying by tower crane, and isolate construction workers from the dangerous environments. We derive a relationship of wheel and its motor, find a proper capacity of wheel motor in order to rotate a wheel. Through experiments of attitude control, we show to obtain desired control objectives.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권8호
• /
• pp.459-466
• /
• 2000

In this paper, we propose an attitude controller for an unstructured object using CMG(Control Moment of Gyro) subsystem, which has a stabilizer function. The CMG subsystem consists of one motor for spinning the wheel and the other motor for turning the outer gimbal. While the wheel of CMG subsystem is spinning at high speed, applying force to the spin axis of the wheel leads the torque about the vertical axis. We utilize the torque to control the attitude of object in this study. For the stabilizer function, in additiion, holding the load at the current position, the power applied to the gimbal motor of CMG will be cut, which result in the braking force to stop the load by gyro effect. However, due to the gear reduction connected to outer gimbal, slow load motion cannot generate the braking force. Thus, in this study, we are willing to make a holding force by applying control power to the gimbal motor from the signal of piezoelectric gyroscopic sensor that detected the angular velocity of the load. These two features are demonstrated in experiment, carrying a beam with crane. As a result, load was started to rotate by controlling gimbal positiion and was stopped by turning off the gimbal power. Moreover, slow movement of the load was also rejected by additional control with gyroscopic sensor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.1083-1088
• /
• 2004

This paper deals with the vibration and stability of a circular cylindrical shaft, modeled as a tapered thin-walled composite beam and spinning with constant angular speed about its longitudinal axis, and subjected to an axial compressive force. Hamilton's principle and the assumed mode method are employed to derive the governing equations of motion. The resulting eigenvalue problem is analyzed, and the stability boundaries are presented for selected taper ratios and axial compressive force combinations. Taking into account the directionality property of fiber reinforced composite materials, it is shown that for a shaft featuring flapwise-chordwise-bending coupling, a dramatic enhancement of both the vibration and stability behavior can be reached. It is found that by the structural tailoring and tapering, bending natural frequencies, stiffness and stability region can be significantly increased over those of uniform shafts made of the same material. In addition, the particular case of a classical beam with internal damping effect is also included.

• Journal of Plant Biotechnology
• /
• 제49권3호
• /
• pp.257-270
• /
• 2022

The aim of this work was to prepare a new biodegradable polyhydroxybutyrate (PHB) submicron fiber mat loaded with hypericin-rich Hypericum perforatum raw extract by centrifugal spinning technology, an alternative approach to the traditional method of electrospinning to fabricate nanofibers or microfibers from solutions at high speed and low cost. Hypericins in methanol/acetone extract of H. perforatum were determined by UHPLC-MS/MS and HPLC/PDA. Submicron fiber mats composed of pure PHB or PHB enriched with H. perforatum extract were prepared using a pilot plant demonstrator for the centrifugal spinning technology and characterized by SEM. Singlet oxygen production was quantified by the 1,3-diphenylisobenzofuran (DPIBF) method in hexane. The results proved a significant production of singlet oxygen by the prepared submicron fiber mat. We also found a significant antibacterial activity against the bacterial strain Escherichia coli CCM 5417 by a method in accordance with JIS Z 2801/ISO 22196 standards. The H. perforatum extract-enriched PHB submicron fiber mats showed potential for the development of self-cleaning and antimicrobial air filters.

• 한국항공우주학회지
• /
• 제39권5호
• /
• pp.385-390
• /
• 2011

본 연구의 목적은 풍동시험을 통해 회전발사체에서 발생하는 동적 마그너스 효과를 실험적으로 측정하는데 있었으며, 이를 위해 약 12,000 rpm으로 회전하는 155-mm 회전발사체 실험모형에 작용하는 마그너스 특성의 측정을 위한 고속풍동실험을 국방과학연구소 삼중음속풍동에서 수행하였다. 실험시의 마하수는 0.7~2.0까지였으며 이때의 받음각 구간은 -4~+10 deg이었다. 풍동실험 측정기법의 유효성 평가를 위해 동일형상 모형에 대해 기 수행하였던 마그너스 측정결과와의 비교검토를 수행하였으며, 기존 연구결과들과 잘 부합됨을 확인하였다.

• 한국정밀공학회지
• /
• 제26권3호
• /
• pp.40-46
• /
• 2009

Toroidally-wound brushless direct-current (BLOC) machines are compact, highly efficient, and can work across a large magnetic gap. For these reasons, they have been used in pumps, flywheel energy storage systems and left ventricular assist devices among others. The common feature of these systems is a spinning rotor supported by a set of (either mechanical or magnetic) bearings. From the view point of dynamics, it is desirable to increase the first critical speed of the rotor so that it can run at a higher operating speed. The first critical speed of the rotor is determined by the radial stiffnesses of the bearings and the rotor mass. The motor also affects the first critical speed if the rotor is displaced from the rotating center. In this paper, we analytically derive the flux density distribution in a toroidally-wound BLOC machine and also derive the negative stiffness of the motor, based on the assumption that the rotor displacement perturbs the flux density distribution linearly. The estimated negative stiffness is validated by finite element analyses.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.406-408
• /
• 1996

This paper describes the BLDC motor which is applicated for a top front loading domestic washing machine. This motor is adopted direct drive washing machine without gear-belt-pulley system. Because gear box is removed, machine volume and noise are reduced. Moreover mechanical troubles in gear box are removed. Realization of variable speed region through of PWM control and high speed is able to efficient washing and spinning.

• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.19-24
• /
• 2015

Gears are produced through a variety of methods. In general, a metal piece is formed into the general shape of a gear through rough cuts. The gear then moves on to a more precise machine that removes more material. Grinders work via abrasion, rubbing a rough surface against a work piece at such high speeds that it literally scrapes unwanted material away from the item. Since the grinder is spinning so fast, the material is removed very quickly. This allows a grinder to remove a very small amount without taking any unwanted material with it. This study investigates the effect of grinding process parameters like grinding spindle speed and table transfer speed on the gear grade and grinding efficiency.

• 한국주조공학회지
• /
• 제15권3호
• /
• pp.242-251
• /
• 1995

Highly alloyed high speed tool steels(ASP steels) were rapidly solidified by melt spinning process, and the microstructures of melt spun tool steel ribbons were examined by optical microscopy and transmission electron microscopy with energy dispersive x-ray spectroscope. The microstructure of melt spun tool steel ribbon was found to be consisted of ${\delta}-ferrite$ cells surrounded by austenite and V-rich MC carbides. The size of ${\delta}-ferrite$ cells and intercellular MC carbides were about $0.4{\mu}m$ or less and 30nm or less, respectively. From the melt spun tool steel ribbons, only the MC type carbide phase was observed, instead of $M_2C$, $M_{23}C_6$ and $M_6C$ carbides which were generally observed in other rapidly solidified high speed steels. Such a change in type of carbide phase formed could be attributed to the increase in alloying content of vanadium and carbon. However, changes in microsturcture of melt spun tool steels with alloying content of cobalt, vanadium and carbon were not observed.