• The Journal of Korean Physical Therapy
• /
• 제28권1호
• /
• pp.1-7
• /
• 2016

Purpose: The aim of this study was to evaluate the effect of Bridge exercise with abdominal drawing-in on static and dynamic balance in patients with stroke. Methods: Forty patients with stroke participated in this study. Participation was randomly assigned to the Bridge exercise group (n=20) and the Bridge exercise with abdominal drawing-in group (n=20). A bio-feedback device was used when patients performed the Bridge exercise with abdominal drawing-in. This training was performed without any motion on the patient's spine and upper belly part, and the pressure was held with the biofeedback device as 40-70 mmHg. Both groups received training 30 minutes per day, three times per week, for four weeks. Weight bearing, anterior limit of stability, and posterior limit of stability for static balance ability were measured, and Berg balance scale (BBS), Timed up and go test (TUG) for dynamic balance ability were also measured. Results: Participants showed significant differences between pre- and post-mediation in terms of weight bearing, anterior limit of stability, posterior limit of stability, Berg balance scale, and Timed up and go test (p<0.05). The Bridge exercise with abdominal drawing-in group showed a more significant increase (p<0.05). Conclusion: According to the results of this study, both exercises were effective for improving the static and dynamic balance ability. However we suggest that the Bridge exercise with abdominal drawing-in is more efficient for increasing balance ability in patients with stroke.

• Journal of Korean Neurosurgical Society
• /
• 제41권2호
• /
• pp.77-81
• /
• 2007

Objective : In a variety of thoracolumbar diseases, corpectomy followed by interbody bone graft and anterior instrumentation has allowed direct neural decompression and reconstruction of the weight-bearing column by short segments fusion. In this study, we compared spinal stability of the two different anterior thoracolumbar instruments : Z-plate and Kaneda device representing plate and two-rods type, respectively. Methods : A retrospective review was performed for all the patients with thoracolumbar diseases or traumas treated with anterior corpectomy, autologous iliac bone graft, and fixation with instruments from 1996 to 2000. For the anterior instrumentation, Z-plate or Kaneda device was used for 24 [M:F=5:9, average age=37] and 12 [M:F=9:3, average age=41] patients, respectively. The plain AP and lateral flexion-extension films were taken immediately after surgery and at each follow-up. The sagittal and coronal Cobb's angles at the operation segments were used to observe the change of initial fixation status. The surgical time length and bleeding amount of the two groups were compared. Intra-operative and post-operative instrument associated complications were evaluated. Student t-test was used for statistical analysis and p-value less than 0.05 was considered to be significant. Results : Mean follow-up durations for Z-plate and Kaneda device were 24 and 21 months, respectively. The fusion rate was 91% for Z-plate and 100% for Kaneda device. Two cases of Z-plate group showed instrumentation failure during the follow up period, in which additional surgery was necessary. The mean differences of sagittal Cobb's angles among the AP images immediate after surgery and at follow-up were 7 and 2 degrees for Z-plate and Kaneda device, respectively [p<0.05]. The mean differences of coronal Cobb's angles were 5 and 2 degrees for Z-plate and Kaneda device, respectively [p<0.05]. No Intra-operative complication has occurred in both groups. There was no difference in surgery time and bleeding amount between two groups. Conclusion : We think that Kaneda device [rod type] is stronger than Z-plate [plate type] to keep the spinal stability after anterior thoracolumbar surgery.

• 척추신경추나의학회지
• /
• 제4권2호
• /
• pp.109-120
• /
• 2009

Objectives : We already know the importance of stability and flexibility on the vertebra. It is important to keep the lumbar lordosis for stability and flexibility. We hope to reduce lower back pain and low extremity pain by changing the angle of the Lumbar Kyphosis through conservative treatment. We have evaluated the effect of conservative treatment with Saamchimbeop Pejeonggyeok by experimenting one patient suffering from Lumbar Kyphosis with lower back pain and low extremity pain. Methods : One patients were diagnosed as Lumbar Kyphosis through X-ray examination. We used conservative treatment, especially Pejeonggyeok Treatment to the patients and measured NRS((Numerical Rating Scale), rating scale for low back pain, low extremity pain and SLR(Straight Leg Raising) test and walking time in whole term of admission, and we also measured flexion, extension angle and lumbar kyphosis using lumbar x-ray lateral view after diganosing by Lumbar Kyphosis. Results and Conclusions : After treating conservative therapy, We figured out that the patient were on the mend, and we found out the angle change in flexion, extension and lumbar Kyphosis. These results suggest that Pejeonggyeok Treatment were effective to improved Lumbar Kyphosis and reduced the low back pain.

• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.130-136
• /
• 2010

For stability analysis of the lumbar spine, the hypothesis presented is that the disc has stress sensors driving feedback mechanism, which could react to the imposed loads by adjusting the contraction of the muscles. Fusion in the motion segment of the lumbar spinal column is believed to alter the stability of the spinal column. To identify this effect finite element (FE) models combined with optimization technique was applied and quantify the role of each muscle and reaction forces in the spinal column with respect to the fusion level. The musculoskeletal FE model was consisted with detailed whole lumbar spine, pelvis, sacrum, coccyx and simplified trunk model. Vertebral body and pelvis were modeled as a rigid body and the rib cage was constructed with rigid truss element for the computational efficiency. Spinal fusion model was applied to L3-L4, L4-L5, L5-S1 (single level) and L3-L5 (two levels) segments. Muscle architecture with 46 local muscles was used as acting directions. Minimization of the nucleus pressure deviation and annulus fiber average axial stress deviation was selected for cost function. As a result, spinal fusion produced reaction changes at each motion segment as well as contribution of each muscle. Longissimus thoracis and psoas major muscle showed dramatic changes for the cases of L5-S1 and L3-L5 level fusion. Muscle force change at each muscle also generated relatively high nucleus pressure not only at the adjacent level but at another level, which can explain disc degeneration pattern observed in clinical study.

• 대한통합의학회지
• /
• 제7권2호
• /
• pp.121-131
• /
• 2019

Purpose : Lower back pain is a common disorder experienced by approximately 90-% of the population at least once in a lifetime. This study examines changes in the thicknesses and ratios of the deep and superficial fibers of the multifidus according to the lumbar stabilization exercise used for spinal stabilization. Methods : Ten different lumbar stabilization exercises were implemented by 20 healthy men in random order, and the thickness of multifidus muscle was measured ultrasound image during each exercise. Results : The surface muscle fibers of the multifidus muscles significantly increased in the exercise method in which the arms and legs were lifted (p<.05), while the deep muscle fibers of the multifidus muscles increased significantly in the exercise in which the arms and legs were not lifted (p<.05). The ratio of the thickness of surface muscle fibers to the total thickness of muscle fibers was higher in the exercise method in which the arms and legs were lifted (p<.05), while the ratio of the thickness of deep muscle fibers to the total thickness of muscle fibers was higher in the hollowing and bracing exercise method in which the arms and legs were not lifted (p<.05). Conclusion : When lumbar stabilization exercise should be performed at clinics to strengthen the deep muscle fibers of the multifidus muscles that have larger effects on the stability of spinal segments, taking the stability of the spine into consideration indicates that, hollowing and bracing exercise methods that do not that cause isotonic extension to the spine are appropriate.

• 대한관절경학회지
• /
• 제3권2호
• /
• pp.132-137
• /
• 1999

목 적 : 관절경하에서 전위된 경골극 골절을 suture hook와 PDS를 이용하여 견인봉합술을 실시하고 그 수술수기와 임상적 결과를 보고하고자 한다. 재료 및 방법 : 1997년 2월부터 1998년 6월까지 견인봉합술을 시행한 12명의 환자중 최소 1년이상 추시관찰이 가능하였던 7명의 환자를 대상으로 하였다. 7예 모두 수상후 3주이내의 급성 손상이며 증상 발현부터 수술까지의 평균 기간은 6.1일이었다. 7예중 4예에서 반월상 연골판파열, 내측 측부 인대손상등의 동반손상이 발견되었고 경골극 골절에 대한 수술시 동반손상에 대한 수술적 치료도 병행하였다. 결 과 : 추시기간은 평균 16.6개월로서, 7례 모두에서 골유합을 얻을수 있었으며 골유합시기는 평균 7.4주였다. 후방십자인대 견열골절 및 외측 반월상 연골판손상이 동반된 환자중 1례에서 관절 운동의 제한이 있었으나 수술후 1년 뒤 관절경적 유착 제거술이후 정상 관절 운동 범위를 보였다. 1명의 환자에서 경도의 전방 불안정성의 소견을 보였으나 자각증세나 일상생활의 제한이 없었다. 결 론 : Suture hook과 PDS를 이용한 관절경적 수술은 골편이 작거나 분쇄골절인 경우에도 해부학적 정복을 얻을수 있고, 조기 재활도 가능하므로 전위된 경골극 골절치료에 있어서 유용한 방법의 하나로 사료된다.

• 국제물리치료학회지
• /
• 제4권2호
• /
• pp.573-587
• /
• 2013

The purpose of this study was conducted in order to analyze the effects of the manual intervention and self-corrective exercise models of general coordinative manipulation(GCM) on the balance restoration of spine & extremities joints with distortions and mal-alignment areas. The subjects were the members who visited GCM Musculoskeletal Prevent Exercise Center from March 1 2012 to December 31 2013 because of spine & extremities joints distortion and mal-alignments, poor posture, and body type correction. All subjects were diagnosed with the four types of the GBT diagnosis. And according to the standards of the mobility vs stability types of the upper & lower body, they were classified into Group 1(40 persons) and Group 2(24 persons). For every other day for three times a week, GCM intervention models were applied to all subjects for four weeks, adding up to 12 times in total. Then the balance restoration effects were re-evaluated with the same methods. The results are as follows. 1) Balance restoration effects of VASdp(Visual analysis scale pain & discomfort) and ER(Equilibrium reaction: ER) came out higher in GCM body type(GBT) II III IV of Group 1. 2) In case of balance restoration effects in Moire and postural evaluation areas, Group 1 was higher and cervical and scapular girdle were higher in Group 2. The balance restoration of the four GBT types was significant in all regions(p<.05), and the scapular girdle came out as high in the order of GBTII IV I. 3) In case of thoracic-lumbar scoliosis and head rotation facial asymmetric cervical scoliosis ribcage forward, the balance restoration effects of the upper body postural evaluation areas came out the highest in Group 1 and Group 2, respectively. The balance restoration effects of the four GBT types were significant in all regions(p<.05), and came out the highest in lumbar scoliosis GBTIII I, ribcage forward and thoracic scoliosis GBTII IV. 4) The balance restoration effects of the lower body postural evaluation areas came out higher in Group 1 and Group 2 for pelvis girdle deviation patella high umbilicus tilt and hallux valgus foot longitudinal arch: FLA patella direction, respectively. The balance restoration effects of the four GBT types were significant in all regions(p<.05), and came out the highest in pelvis girdle deviation GBTIII I and patella high-direction GBTIV II I. 5) The balance restoration effects between the same GBT came out significant (p<.05) in all evaluation areas and items. The conclusions of this study was the manual intervention and self-corrective exercise models of the GCM about the mal-alignment of the spine & extremities joints across the whole body indicated high balance restoration effects(p<.05) in spine & extremities joints in all evaluation areas.

• Journal of Korean Neurosurgical Society
• /
• 제62권1호
• /
• pp.96-105
• /
• 2019

Objective : The aims in the management of thoracolumbar spinal fractures are not only to restore vertebral column stability, but also to obtain acceptable alignment of the thoracolumbar junction (T-L junction) to prevent complications. However, insufficient surgical correction of the thoracolumbar spine would be likely to cause late progression of abnormal kyphosis. Therefore, we identified the surgical factors that affected unfavorable radiologic outcomes of the thoracolumbar spine after surgery. Methods : This study was conducted in a single institution from January 2007 to December 2013. A total of 98 patients with unstable thoracolumbar spine fracture were included. In these patients, fixation was done through transpedicular screws with rods by three surgical patterns. We reviewed digital radiographs and analyzed the images preoperatively and postoperatively during follow-up visits to compare the change of the thoracolumbar Cobb angle with radiologic parameters and clinical outcomes. The unfavorable radiologic group was defined as the patients who were measured as having greater than 20 degrees of thoracolumbar Cobb angle on the last follow-up, or who underwent kyphotic progression of thoracolumbar Cobb angle greater than 10 degrees from the immediate postoperative state to final follow-up, or who had overt instrument failure with/without additional surgery. We assessed the risk factors that affected the unfavorable radiologic outcomes. Results : We had 43 patients with unfavorable radiologic outcomes, including 35 abnormal thoracolumbar alignments and 14 instrumental failures with/without additional surgery. The multivariate logistic regression test showed that immediate postoperative T-L junction Cobb angle less than 10.5 degrees was a statistically significant risk factor, as well as the presence of osteoporosis (p=0.017 and 0.049, respectively). Conclusion : Insufficient correction of thoracolumbar kyphosis was considered to be a major factor of an unfavorable radiological outcome. The spinal surgeon should consider that having a T-L junction Cobb angle larger than 10.5 degrees immediately after surgery could result in an unfavorable radiological outcome, which is related to a poor clinical outcome.

• 대한정형도수물리치료학회지
• /
• 제23권2호
• /
• pp.9-16
• /
• 2017

Background: The purpose of this study was to investigate the relationship between the spine and the flat-foot, the stability and the alignment of the posture of the neck to prevent the alignment of the ankle joint operation and the lower back flexibility of the lumbar region according to the type of treatment using active stretching of the triceps, back pain, and to see how they affect weight bearing differences. Methods: The subjects of this study were 24 chronic low back pain patients. They were randomly divided into experimental group and control group. In the experimental group, ankle joint mobilization and active scraping of triceps were performed three times a week for a total of 6 weeks. The control group was performed in the same way without articulation. The range of flexion and extension motion of the lumbar spine and pain degree and difference of weight-bearing were measured before and after the experiment. Results: The model of ankle joint mobilization and calf muscle elongation of flat foot significantly improved the range of flexion and extension motion of the vertebrae (p<.05) and the VAS and distribution of weight-bearing were decreased in both of two groups (p<.05). In other words, the exercise and mobilization help to recover of the balance of the whole musculoskeletal, the vertebrae. Conclusions: The active exercise of the triceps muscle of the lower leg in this study It affects the flexibility of the lumbar spine, the pain and the difference in the weight support of the lower extremities, when we performed ankle joint mobilization for exercise and cramping, pain and the difference in weight support between the two lower limbs.

• Journal of Korean Neurosurgical Society
• /
• 제53권6호
• /
• pp.331-336
• /
• 2013

Objective : The offset connector can allow medial and lateral variability and facilitate intralaminar screw incorporation into the construct. The aim of this study was to compare the biomechanical characteristics of C7 intralaminar screw constructs with and without offset connector using a three dimensional finite element model of a C6-7 cervical spine segment. Methods : Finite element models representing C7 intralaminar screw constructs with and without the offset connector were developed. Range of motion (ROM) and maximum von Mises stresses in the vertebra for the two techniques were compared under pure moments in flexion, extension, lateral bending and axial rotation. Results : ROM for intralaminar screw construct with offset connector was less than the construct without the offset connector in the three principal directions. The maximum von Misses stress was observed in the C7 vertebra around the pedicle in both constructs. Maximum von Mises stress in the construct without offset connector was found to be 12-30% higher than the corresponding stresses in the construct with offset connector in the three principal directions. Conclusion : This study demonstrated that the intralaminar screw fixation with offset connector is better than the construct without offset connector in terms of biomechanical stability. Construct with the offset connector reduces the ROM of C6-7 segment more significantly compared to the construct without the offset connector and causes lower stresses around the C7 pedicle-vertebral body complex.