• Journal of the Korea Institute of Building Construction
• /
• v.21 no.1
• /
• pp.31-39
• /
• 2021

The aim of this paper is to improve durability of cement paste by imparting hydrophobicity to the surface and sphere of cement-based materials. A cement paste mixed with a silane/siloxane-based water repellent, and the initial hydration performance, flow performance, and age-specific compressive strength were measured. In addition, the water contact angle, SEM, and XRD before and after surface polishing were measured. When 0.5% of the silane/siloxane-based water repellent was mixed into the cement paste, the compressive strength increased, but the compressive strength decreased as the mixing amount increased by 1.5% and 3.0%. When a silane/siloxane water repellent was incorporated into the cement paste, the hydrophilicity was improved and the contact angle was increased due to hydrophobicity. In addition, the contact angle after surface polishing was found to be larger than the contact angle before surface polishing.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.42-49
• /
• 2020

This paper is a basic study to improve durability by imparting hydrophobicity to the surface and sphere of cement-based materials. A cement mortar to which a silane/siloxane-based mixed water repellent was added was prepared, and its initial hydration performance, flow performance, and compressive strength were measured. In addition, after the surface was abraded, the water contact angle and water absorption were measured. The flow of cement mortar to which the water repellent was added was found to decrease up to 1.5% in the addition amount of the water repellent agent, and increased at 3.0% in the addition amount. It was found that the setting time of the cement paste was delayed in both the initial setting and the termination when the water repellent was added. It was found that the compressive strength decreased from 3.0% of the maximum added amount of the water repellent to a maximum of 30%. The contact angle was found to increase when the water repellent was added to the cement mortar, and the contact angle after surface polishing was found to be larger than before surface polishing. The addition of the water repellent showed hydrophobicity not only on the surface but also on the surface and cross section damaged by polishing. The water absorption rate was found to decrease when the water repellent was added to the cement mortar, and the water absorption rate after surface polishing was found to be greater than before surface polishing.

• International Journal of Computer Science & Network Security
• /
• v.22 no.1
• /
• pp.331-339
• /
• 2022

The global process of transition from industrial to information society, as well as socio-economic changes taking place in Ukraine, require significant changes in many areas of state activity. It is especially connected with the reforms in the sphere of education. Today, national programs provide for the development of education on the basis of new progressive concepts, the introduction of the educational process of new pedagogical technologies and scientific achievements, the creation of a new system of information education, entrance of Ukaine into the transcontinental computer information system. Information technologies are qualitatively changing the key resources of development: this is no longer a space with fixed production, but primarily mobile finance and intelligence. They have a direct impact on the formation of personal growth, professional content and self-organization, emotional and psychological maturity and consciousness, and so on. One of the main factors in ensuring the stability and social education of the country's citizens is the culture of security, the formation and development of which is an urgent problem today. Comprehensive and systematic development of security culture will significantly increase the readiness of the population, the level of environmental, labor and patriotic education, reduce human losses, material damage from emergencies. Ecological education can be carried out more successfully only gradually and in accordance with the socio-psychological periods of one's development: kindergarten - school - college - university. The creation of such a system of environmental education should be enshrined as the basis of state environmental policy as a constitutional norm with the usage of information technology. Graduates of universities, who are the future of our country, after mastering the skills of basic environmental education must have a high level of environmental culture, which is, in turn, part of general human culture, and investigate environmental issues from the standpoint of their profession. It is known that with the help of environmental education the collective intelligence of society is formed, which can predict human activities and processes occurring in nature, and in some way to help with the elimination of crises. It is through environmental education that another system of human values is being formed, which places great emphasis on intangible wealth and solidarity, and great responsibility of humanity for the ecological state of the native country; provides a higher standard of living as a result of sustainable development, through the introduction of information technology in this system. To improve the quality of life, we need better knowledge, which must be implemented through information technology at the international level.

• Conservation Science in Museum
• /
• v.26
• /
• pp.143-160
• /
• 2021

The Seoul Baekje Museum has been conducting excavations at the Ancient Tomb Complex in Seokchon-dong, Seoul (Historic Site No. 243), known to be tombs of the royal family and the ruling class during the Hanseong period of the Baekje Kingdom. In this study, gold earrings that were revealed during the excavation underwent scientific analysis and conservation treatment. Stereo microscopy, SEM, X-ray imaging, CT, and XRF were applied in the analysis, and the characteristics, internal structure, and composition of the earrings as well as their production method were investigated. The results confirmed that the main hoops of the gilt-bronze earrings were made of copper cores gilt using mercury amalgamation. The findings also revealed that the hexahedron in the middle pendant was made by connecting small rings using molten gold powder, and the pendant sphere at the end was formed by soldering two hemispheres. As for the two thin-hoop earrings, they showed similar surface compositions but were made using different methods, with one made from a copper core wrapped with a gold plate and the other made by bending a gold rod. The gold content varied depending on the item and the place of measurement, but overall the earrings showed a relatively high gold content of approximately 19 to 21K. The purity of the golden earrings and the sophisticated manufacturing techniques applied indicate the high status of the buried person and of the tomb complex in Seokchong-dong.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.229-236
• /
• 2022

An experimental investigation was conducted on the influences of median size, dust concentration, dust condition (cloud and layer) for the fire and explosion hazard assessment of dusts with the same powder property. For this purpose, tests have been performed in accordance with 20 L explosion sphere, thermogravi- metric analyze, combustion rate tester (UN method). We investigated the explosion characteristics and flame propagation velocity (FPV) in dust cloud and the flame spread velocity(FSV) over dust layer on 8 dust samples with different particle sizes of 4 types of dusts (Sugar, Mg, Al, Zr). An explosion hazard increased with decreasing particle size in Mg and Al dust clouds, but sugar did not show the effect of explosion hazard due to particle size change in dust clouds. The flame propagation velocity (FPV) of suspended dusts increased significantly when the particle size decreased from micro to nano than the variation of particle size in micro range. The flame spread velocity (FSV) over dust layer showed a tendency to increase over the inclined dust layers (30° slope) rather than the horizontal dust layers (0° slope). The flame spread rate (FSV) over dust layers increased on the inclined dust layer (30° slope) rather than the horizontal dust layer (0° slope) and was higher upward flame than the downward flame in condition of inclined dust layers(30° slope).

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.251-258
• /
• 2022

Donghae Port is adjacently located to a residential area wherein 26,933 generations are creating a living environment. The areas comprise Song-jeong village (5,754 generations) and Bukp-yeong village (21,179 generations). Major cargoes handled in Donghae Port are dusty limestone, cement, anthracite, and bituminous coal, etc. In the process of handling such cargoes, air pollutants including oxide dust and fine dust which adversely impact the living conditions and health of residents are generated, causing air pollution in the vicinity of the port. Currently, Donghae Port is making an effort to improve the operation environment of the infrastructure and equipment in stages, for the purpose of reducing air pollutant emissions caused by the port industries in a long-term perspective. In this study, the sphere of influence of fine dust exposure and the degree of air pollution in the surrounding area were analyzed such as the state of fine dust concentration and diffusion in the vicinity of Donghae Port, fine dust diffusion pattern and spatial distribution of high-concentration considering wind direction and speed characteristics during the day and seasonal cycles. A more effective plan to reduce the concentration of fine dust in nearby areas by combining reduction plan, is being developed in terms of improvement regarding port infrastructure and equipment, and reduction measures considering the characteristics of the atmosphere environment according to the daytime, nighttime and season.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.2
• /
• pp.27-44
• /
• 2021

This study is to identify the concept of action from the critical science perspective and to explore the agency of home economics teachers for the purpose of teacher education. The context and various characteristics of home economics teacher' agency were identified in terms of philosophy and teacher education. The results of the study indicates, first, the concept of action refers to an activity of individuals involving one's own intentions, and include the ability to reveal a unique identity that aims to reach a set purpose and decision, and this can be identified by mutual meaning in the public sphere. Second, teacher agency is influenced by a teacher's professional experiences and cultural and structural aspects, and it can create an environment which can promote self-directed and cooperative relationships among individuals and communities. Therefore, home economics teachers should be able to reasonably judge, contemplate, and act through reflections on the circumstances and consequences in which their agency is exercised. Third, home economics teachers can reflect and think critically about the values, roles, and sense of purpose of home economics education based on agency. Teachers should focus on the process of achieving their agency rather than on completing it, and they can continuously develop it through a perceived shared understanding among teachers. Therefore, the conceptualization of the agency of home economics teachers is to understand the practice revealed in a teacher's actions. This requires environmental support in school settings because it acts as a mechanism for strengthening the thinking and reflection of teachers through the creation of interactive environments in which professional knowledge and experiences can be shared.

• International Journal of Computer Science & Network Security
• /
• v.22 no.5
• /
• pp.79-88
• /
• 2022

Modern production requires production staff who have design competence, experience and skills to work in various types of work integrated into professional activities. Possession of digital design methods significantly expands the opportunities for professional activities of qualified workers. The purpose of our study was to study the impact of pedagogical conditions on the formation of design competence of future qualified workers in a group work. We have identified a set of pedagogical conditions that promote the development of professionally oriented artistic and technical creativity of workers in the conditions of curricular and extracurricular activities, which include motivational-target, procedural-semantic, organizational-technological, and subject-oriented. It is shown that the formation of design competence is determined by motivational, informational-active and reflection criteria, which are aimed at motivational-value, cognitive, operational-active, creative, social and emotional components of this competence. The methodology of the research is highlighted, which includes the use of the following methods: determination of the personality's motivational sphere in order to identify strong and weak motives of students activity; multiple intelligence to identify students talents in the direction of practical intelligence, which is important for design competence; determining the level of creative activity to identify manifestations of students creative abilities; identifying the type of students innovative thinking in order to develop motivation for success; factor-criterion model, developed on the basis of a qualimetric approach, which is used to identify the level of design competence formation in accordance with its components. The results of the study showed that the creation of separate pedagogical conditions in the institution of vocational education and training (VET) had a positive impact on the development of design competence, which shows the potential of artistic and technical design in the development of professional creativity of future qualified workers taking into account the environmental approach.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.85-89
• /
• 2021

AlGaN-based UV-C light-emitting diodes (LEDs) were applied for p-type activation by electrochemical potentiostatic activation (EPA). The p-type activation efficiency was increased by removing hydrogen atoms through EPA treatment using a neutral Mg-H complex that causes high resistance and low conductivity. A neutral Mg-H complex is decomposed into Mg^- and H⁺ depending on the key parameters of solution, voltage, and time. The improved hole carrier concentration was confirmed by secondary ion mass spectroscopy (SIMS) analysis. This mechanism eventually improved the internal quantum efficiency (IQE), the light extraction efficiency, the leakage current value in the reverse current region, and junction temperature, resulting in better UV-C LED lifetime. For systematic analysis, SIMS, Etamax IQE system, integrating sphere, and current-voltage measurement system were used, and the results were compared with the existing N₂-annealing method.

• BMB Reports
• /
• v.55 no.2
• /
• pp.98-103
• /
• 2022

Increased mRNA levels of cancer upregulated gene (CUG)2 have been detected in many different tumor tissues using Affymetrix microarray. Oncogenic capability of the CUG2 gene has been further reported. However, the mechanism by which CUG2 overexpression promotes cancer stem cell (CSC)-like phenotypes remains unknown. With recent studies showing that pyruvate kinase muscle 2 (PKM2) is overexpressed in clinical tissues from gastric, lung, and cervical cancer patients, we hypothesized that PKM2 might play an important role in CSC-like phenotypes caused by CUG2 overexpression. The present study revealed that PKM2 protein levels and translocation of PKM2 into the nucleus were enhanced in CUG2-overexpressing lung carcinoma A549 and immortalized bronchial BEAS-2B cells than in control cells. Expression levels of c-Myc, CyclinD1, and PKM2 were increased in CUG2-overexpressing cells than in control cells. Furthermore, EGFR and ERK inhibitors as well as suppression of Yap1 and NEK2 expression reduced PKM2 protein levels. Interestingly, knockdown of β-catenin expression failed to reduce PKM2 protein levels. Furthermore, reduction of PKM2 expression with its siRNA hindered CSC-like phenotypes such as faster wound healing, aggressive transwell migration, and increased size/number of sphere formation. The introduction of mutant S37A PKM2-green fluorescence protein (GFP) into cells without ability to move to the nucleus did not confer CSC-like phenotypes, whereas forced expression of wild-type PKM2 promoted such phenotypes. Overall, CUG2-induced increase in the expression of nuclear PKM2 contributes to CSC-like phenotypes by upregulating c-Myc and CyclinD1 as a co-activator.