• 방사성폐기물학회지
• /
• 제16권1호
• /
• pp.65-82
• /
• 2018

With the significant increase in spent ion-exchange resin generation, to meet the requirements of Waste Acceptance Criteria (WAC) of the Wolsong disposal facility in Korea, blending is considered as a method for enhancing disposal options for intermediate level waste from nuclear reactors. A mass balance formula approach was used to enable blending process with an appropriate mixing ratio. As a result, it is estimated around 44.3% of high activity spent resins can be blended with the overall volume of low activity spent resins at a 1:7.18 conservative blending ratio. In contrast, the reduction of high activity spent resins is considered a positive solution in reducing the amount of spent resins stored. In an economic study, the blending process has been proven to lower the disposal cost by 10% compared to current APR1400 treatment. Prior to commencing use of this blending method in Korea, coordinated discussion, and safety and health assessment should be undertaken to investigate the feasibility of fitting this blending method to national policy as a means of waste predisposal processing and management in the future.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2918-2925
• /
• 2021

The efficiency of decontamination of model spent ion exchange resins, contaminated with magnetite and hematite, with mineral acid solutions, and using electro-decontamination, was evaluated. It has been shown that effective hematite dissolution occurs in concentrated mineral acid solutions. However, the use of direct current increases the decontamination efficiency of spent ion exchange resins contaminated with hematite. It is determined that with increasing voltage and acid concentration, the dissolution efficiency of hematite deposits increases and can exceed 99%. It has been shown that hematite dissolution is accompanied by secondary adsorption of radionuclides due to ion exchange, which can be removed with sodium nitrate solutions.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.165-175
• /
• 2005

Measurement of spent resin activity was initiated in 2004 in order to develop the C-14 removal technology for safe disposal. As part of this program, spent resins were sampled and measured in the in-station resin storage tank 2 at Wolsong Nuclear Power Plant Unit 1. At the time of sampling, the resins had been in storage tank from 3 to 23 years. Total 72 resin samples were sampled, which were collected from both man-hole (68 samples) and test-hole (4 samples) in the in-station resin storage tank 2. They were separated into liquid, activated carbon, zeolite, and spent resin. The spent resins were oxidized with sample oxidizer and analyzed for C-14. Ten of collected mixed resin samples were separated by density into cation and anion resins using a sugar solution. The C-14 concentration in anion exchange resin was approximately 2 times higher than in the mixed resin. The average concentration of C-14 in the cation/anion mixed exchange resin was $460\;GBq/m^3$ from test-hole and $53.1\;GBq/m^3$ from man-hole. We have found that concentration of C-14 in the spent resin is about from 0.4 to $1,321\;GBq/m^3$. So it could be a problem, when dispose of at a repository, since there is a disposal limit of $222\;GBq/m^3$. This means we should develop the C-14 removal technology.

• 방사성폐기물학회지
• /
• 제5권3호
• /
• pp.179-188
• /
• 2007

가압경수로형 원자력발전소의 운영과정에서 발생된 폐수지내 $^{14}C$ 및 $^3H$의 분포특성을 조사하였다. $Na_2^{14}CO_3$ 표준용액을 사용한 $^{14}C$의 회수율 측정결과, 사용한 산의 종류에 관계없이, 3 N-HCl $3\;N-HNO_3,\;3\;N-H_2SO_4$, 주입한 $^{14}C$ 농도 $0.72\;Bq{\sim}460\;Bq$ 범위에서 $81%{\sim}100%$의 회수율을 나타내었다. 같은 장치를 사용하여 HTO 표준용액 증류에 의한 $^3H$의 회수율은 주입한 $^3H$ 농도 $0.60\;Bq{\sim}435\;Bq$ 범위에서 $81%{\sim}101%$ 이었다. 습식산화-산용출법에 의한 폐수지의 $^{14}C$ 및 $^3H$ 동시분리시, $3\;N-H_2SO_4$를 사용했을 때 다른 감마핵종에 의한 방해가 없었으며, $^3H$ 포집액이 섬광제와 잘 혼합되었다. 그러나 3 N-HCl을 사용했을 때 $^3H$ 포집용액에서 $^{60}Co,\;^{134}Cs,\;^{137}Cs$ 및 $^{54}Mn$ 등의 감마핵종이 검출되었다. 또한 Sample Oxidizer에 의한 $^3H$ 포집용액에서도 $^{60}Co,\;^{134}Cs,\;^{137}Cs$ 및 $^{54}Mn$ 등이 검출되었으며, $^{14}C$ 포집용액에서는 $^{134}Cs,\;^{137}Cs$이 검출되었다. 폐수지의 총 $^{14}C$ 함량중 약 70% 이상이 무기 탄소로 확인되었다. 30개 폐수지 시료중 8개 고방사능 폐수지의 $^{14}C$ 및 $^3H$의 평균농도는 각각 $19000\;Bq/g{\pm}41000\;Bq/g,\;670\;Bq/g{\pm}460\;Bq/g$이었으며 22개 저방사능폐수지에서는 각각 $4.2\;Bq/g{\pm}4.3\;Bq/g,\;6.0\;Bq/g{\pm}5.3\;Bq/g$이 검출되었다. 고방사능 폐수지의 평균 $^{14}C/^3H$비는 28로 저방사능 폐수지의 0.70에 비해 높게 나타났으며, $^{14}C$ 및 $^3H$의 농도는 서로 비례하는 경향을 보였다.

• 방사성폐기물학회지
• /
• 제7권3호
• /
• pp.175-182
• /
• 2009

유동층 비중차 분리기를 이용하여 혼합 폐 이온교환수지에서 폐 양이온수지와 폐 음이온수지로 분리하였으며, 원소분석과 열분석으로 분리가 잘 되었음을 확인하였다. 비중차 분리를 통해 얻은 수백 미크론의 구형 알갱이 형태의 폐 양이온수지와 폐 음이온수지 각각을 볼밀로써 24시간 습식 분쇄하여 적정 입도 이하의 입자가 균일하게 분산된 고농도 슬러리를 얻은 다음, 희석하여 $COD_{cr}$, 농도 25,000ppm의 시료를 준비하였다. 실험실 규모의 소형 초임계수산화(Super Critical Water Oxidation, SCWO) 장치(반응기 용량 : 220 mL)로써 화력발전소에서 발생한 폐 양이온수지와 폐 음이온수지에 대해 최적의 분해조건을 확립한 다음, 파일럿플랜트(반응기 용량 : 24 L)로 scale-up 실험을 수행하였다. 우선 화력발전소의 폐수지로서 파일럿테스트를 실시한 다음, 원자력발전소의 폐수지로써 파일럿테스트를 수행하여 최적의 분해조건을 설정하였다. 실험실 규모의 소형 SCWO 장치와 파일럿플랜트의 설계 및 운전에서 얻은 경험을 바탕으로 원자력발전소 내에 설치 가능한 규모로 상용설비(처리용량 : 150kg/h)를 설계 중에 있다.

• 방사성폐기물학회지
• /
• 제17권1호
• /
• pp.59-73
• /
• 2019

원자력발전소 운영 과정에서 발생되는 폐기물인 폐수지를 원천적으로 저감하기 위해, 새로운 폐수 정화기술을 개발하고 원전 폐수처리시스템에 가상적으로 적용하여 효용성을 평가하고자 하였다. 본 기술의 기본 원리는 폐수에 존재하는 주요 핵종이온들을 생물학적 혹은 화학적 방법을 통해 무기 결정광물로 바꾸는 방식이다. 실험실에서 폐수를 대상으로 회분식실험을 통해 핵종 제거율을 측정한 결과, 생물학적 방법은 24시간 이내에 세슘을 80% 이상 제거하였고, 화학적 방법은 95% 이상 세슘을 선택적으로 제거할 수 있었다. 그리고 원전 폐수에 존재하는 다른 주요 핵종들(Co, Ni, Fe, Cr, Mn, Eu)에 대해서도 초기 99% 이상의 높은 제거율을 보여 주었다. 우리는 APR1400 원자력발전소의 폐수처리시스템 공정에서 역삼투압(R/O)과 유기 이온교환수지 모듈 사이에 가상으로 본 기술 모듈을 설치하였다. 가상의 모듈 설치를 통한 기술적 타당성 평가를 통해, 우리는 폐수의 주요 핵종들이 90% 이상 선택적으로 제거되고 폐수지의 발생량이 대폭 감소된다는 결과를 얻을 수 있었다. 이러한 결과가 의미하는 바는 본 기술이 향후 미래에 상용화되었을 경우, 폐수지 관리 비용을 크게 감소시키고 수지 수명도 대폭 연장시킬 수 있어, 결과적으로 월성 방사성폐기물 처분시설의 저장고 포화시점을 최대한 늦출 수 있는 이점이 있다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 추계학술논문요약집
• /
• pp.281-282
• /
• 2018

• Nuclear Engineering and Technology
• /
• 제40권6호
• /
• pp.489-496
• /
• 2008

Ferrocyanide-anion exchange resin was prepared and the prepared ion exchange resins were tested on the ability to uptake $Cs^+$ ion. The prepared ion exchange resins were resin-KCoFC, resin-KNiFC, and resin-KCuFC. The three tested ion exchange resins showed ion exchange selectivity on the $Cs^+$ ion of the surrogate soil decontamination solution, and resin-KCoFC showed the best $Cs^+$ ion uptake capability among the tested ion exchange resins. The ion exchange behaviors were explained well by the modified Dubinin-Polanyi equation. A regeneration feasibility study of the spent ion exchange resins was also performed by the successive application of hydrogen peroxide and hydrazine. The desorption of the $Cs^+$ ion from the ion exchange resin satisfied the electroneutrality condition in the oxidation step; the desorption of the $Fe^{2+}$ ion in the reduction step could also be reduced by adding the $K^+$ ion.

• 방사선산업학회지
• /
• 제9권4호
• /
• pp.217-221
• /
• 2015

When reactor coolant leaks occur due to cracks of a steam generator's tube, radioactive materials contained in the primary cooling water in nuclear power plant are forced out toward the secondary systems. At this time the secondary water purification resin in the ion exchange resin tower of the steam generator blowdown system is contaminated by the radioactivity of the leaked radioactive materials, so we pack this in special containers and store temporarily because we could not dispose it by ourselves. If steam generator tube leakage occurs, it produces contaminated spent resins annually about 5,000~7,000 liters. This may increase the amount of nuclear waste productions, a disposal working cost and a unit price of generating electricity in the plant. For this reasons, it is required to develop a decontamination process technique for reducing the radioactive level of these resins enough to handle by the self-disposal method. In this research, First, Investigated the structure and properties of the ion exchange resin used in a steam generator blowdown system. Second, Checked for a occurrence status of contaminated spent resin and a disposal technology. Third, identified the chemical characteristics of the waste radionuclides of the spent resin, and examined ionic bonding and separation mechanism of radioactive nuclear species and a spent resin. Finally, we carried out the decontamination experiment using chemicals, ultrasound, microbubbles, supercritical carbon dioxide to process these spent resin. In the case of the spent resin decontamination method using chemicals, the higher the concentration of the drug decontamination efficiency was higher. In the ultrasound method, foreign matter of the spent resin was removed and was found that the level of radioactivity is below of the MDA. In the microbubbles method, we found that the concentration of the radioactivity decreased after the experiment, so it can be used to the decontamination process of the spent resin. In supercritical carbon dioxide method, we found that it also had a high decontamination efficiency. According to the results of these experiments, almost all decontamination method had a high efficiency, but considering the amounts of the secondary waste productions and work environment of the nuclear power plant, we judged the ultrasound and supercritical carbon dioxide method are suitable for application to the plant and we established the plant applicable decontamination process system on the basis of these two methods.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.161-162
• /
• 2005