• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.711-714
• /
• 2000

In this paper, we propose a high-speed multiplier-free realization using ROM’s to store the results of coefficient scalings in Combination With higher signal rate and pipelined operations. We show that hardware multipliers are not needed. By varying some parameters, the proposed structure provides various combinations of hardware and clock speed (or through-put). An example is given comparing the proposed realization with the distributed arithmetic (DA) realization. Results show that With Proper Choices of the Parameters the proposed structure achieves a faster processing speed with less hardware, as compared to the DA realization.

• Journal of Biomedical Engineering Research
• /
• v.16 no.1
• /
• pp.43-48
• /
• 1995

A high speed optic scanner capable of 16 frames/sec imaging has been developed for the realization of the infrared thermal Imaging system with a single element infrared sensor. The high speed optic scanner is composed of a rotating polygon mirror for horizontal scanning, a flat mirror mounted on a galvanometer for vertical scanning, and a spherical mirror. It has been experimentally found that the optic scanner is capable of 16 framesllsec imaging with the frame matrix size of 256 x 64.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.338-343
• /
• 2010

Low cost motor drives are being sought for high volume energy efficient home appliances. Key to the realization of such low cost motor drives is to reduce the power electronic converter in terms of its components, particularly the active devices, finding the motor with least complexity for manufacturing and a controller that could extract the desired performance from the machine and converter combination. These and other factors such as self-starting, speed control over a wide range and most of all the crowning aspect of a four quadrant operation with bare minimum number of controllable switch (or switches) remain as formidable challenges for low cost motor drive realization. In this paper, a four quadrant switched reluctance motor (SRM) drive with only one controllable switch is realized by using a two-phase machine. The theory and operation of the proposed four-quadrant SRM drive with the proposed control algorithm for its realization are described. The motor drive is modeled, simulated and analyzed to verify its feasibility for self-starting, speed control and for four quadrant operation and the simulation results are presented. Experimental results confirm the validity of the proposed control algorithm for four quadrant control of the SRM drive. The focus of the paper is mainly directed toward the control algorithm for realizing the four-quadrant operation of the two-phase SRM drive with a single controllable switch converter.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.1107-1111
• /
• 2005

The DVR system realization with watermarking and MPEG-4 for real time processing speed improvement is presented in this paper. For the real time processing the system is used the DSP processor, Quick DMA for data transmission, watermarking for security and MPEG-4 compression for facility. The algorithms are that the operational structure has the internal memory of processor, and the optimal realization is suitable to form the DSP processor structure r processed for the iterative operations. The experimental result shows the real time processing is improved 12% over for the D1 image in comparison with the other system.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1994-1996
• /
• 2002

This paper reports a novel high-speed fluid injection system employing a simple magnetic micoractuator. This magnetic microacutator consists of current carrying copper beams and permanent magnet under the beams. There were many efforts to magnetic microactuator realization using conducting coils [1-2]. Even though many of magnetic microactuators were successfully fabricated and tested, it is true that most them suffer complex fabrication processes and thus higher production costs than electrostatic counterparts. In this research, efforts were concentrated on the microactuator realization that has simple structure, low production cost, and mass production possibility.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.3
• /
• pp.39-46
• /
• 1994

In this paper, three types of parameter update law which can be used in model reference adaptive control are suggested based on speed-gradient algorithm which was introduced by Fradkov. It is shown that the parameter update law which was proposed by Narendra is a special from of these laws and that proposed parameter update laws can insure the global stability under some conditions such as attainability and convexity. We also comment that the transfer function of reference model shoud be positive real for the realization of parameter update law.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1125-1128
• /
• 1999

This paper presents a speed controller for the Sinusoidal type BLDC motor using the sliding mode. Since the sliding mode control has some practical limitations such as the chattering phenomenon and reaching phase problems, the technique of overcoming these limitations is proposed in a practical realization. This proposed speed control technique is composed of an smooth integral variable structure control(IVSC), and chattering prediction method.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.852-855
• /
• 2002

This paper presents a design of FIR near-equiripple Nyquist filters having zero-intersymbol interference (ISI) and low sensitivity to timing jitter, with coefficients taking only discrete values. Using an affine scaling linear programming algorithm, an optimum discrete coefficient set can be obtained in a feasible computational time. Also presented is a pipelined multiplier-free FIR filter realization with periodically time-varying (PTV) coefficients based on a hybrid form suitable for Nyquist filter. The realization exploits the coefficient symmetry to reduce the hardware by about one half. High speed computation and low power consumption are achieved by its pipelined and low fan-out structure.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.3
• /
• pp.139-143
• /
• 1999

This paper is on realization of the speed-sensorless vector control of an induction motor using the RLS(Recursive Least Square) algorithm. The speed estimator is including the RLS algorithm and a rotor flux observer. The RLS algorithm has speed and rotor time constant as parameter vectors and rotor flux observer is designed to have robustness to stator resistance variation and through the IP(Integral and Proportional) speed controller stable performance is obtained for estimating rotor speed. Finally the total algorithm are realized in induction motor drive system and its effectiveness is verified.

• Journal of Power System Engineering
• /
• v.3 no.2
• /
• pp.70-78
• /
• 1999

The vector controlled induction motor(I.M) with speed sensor has been widely used for variable speed drive systems. In these application fileds, speed sensorless control are expected strongly to progress reliability, simplicity and cost performance of I.M and to expand its application part. This paper describes a novel speed sensorless control method of I.M based on feedforward quick torque response control technique. Especially, this paper aimed at the realization of sensorless control in the very low speed region, The proposed method can be formulated simply from a motor circuit equation and conducted easily by detecting primary motor currents and a voltage command at every sampling time. Throughout some results of numerical simulations with the assumption of using a pulse width modulation(PWM) voltage source inverter, the validity of the method was successfully confirmed.