• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.7
• /
• pp.938-947
• /
• 2003

In this paper, we derived the formula for estimating the power of the electric motors needed to operate the Decanter-type centrifuge. In the derivation of the formula the sludge-removal torque is to be supplied from the formula derived in the first paper. The intricate nature of the transmission mechanism in the planetary gear trains of the sludge-removal power and torque has been clarified in this second paper. In particular we considered two-motor system, where the main motor drives the machine while the differential-speed control motor plays the role of braking in adjusting the differential speed. Sample calculation for the specific design treated in the first paper showed that the selection criterion for the main motor depends on the lower limit of the differential speed; when the lower limit is set low, it should be selected based on the steadily operating power, while it should be selected based on the starting power when the lower limit is set high. The total power required by both the main motor and the differential-speed control motor increases as the differential speed is decreased. It is suggested that the power loss in the differential-speed control motor could be minimized by attaching an electric generator to it.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.04a
• /
• pp.73-81
• /
• 1995

In Korea, the pilot construction of the first high-speed railroad on the Seoul-Pusan has already started 2 years ago. In the thesis, an attempt is made to develop reliability-based integrity-assessment models for the computer-aided control and maintenance of high-speed railroad bridges. The strength limit state models for PC railroad bridges encompass the bending and shear strengths as well as the strength interaction equations which simultaneously take into the element and system reliablities of the proposed limit states and reliability models. Then, the actual load carrying capacity and the realistic safety of bridges are evaluated using the system reliability-based equivalent strength, and the results are compared with those of the element reliability-based or conventional methods. Various parametric studies are performed for the proposed reliability-based safety and integrity-assessment models using the actual PC box girder bridges used in the pilot construction. And the sensitivity analyses are performed for the basic random variables included in strength limit state models. It is concluded that proposed models may be practically applied for the rational assessment of safety and integrity of high speed railroad bridges.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1047-1056
• /
• 2004

The turnout system is typical railway facility to be in the way of conventional railway line's speed-up. The KNR(Korean National Railroad) :has a speed limit regulation(130km/h) for the passing the turnout to guarantee a safety. This research had been performed to confirm the propriety of this regulation by using experimental and analytical way before it was carried out. The reasonableness of the speed-limit regulation was judged base on the several experiments. It was proved that the regulation was not useless as it had been regarded and very important guide at least up to now.

• Journal of the Korean Society for Railway
• /
• v.8 no.1
• /
• pp.93-100
• /
• 2005

The turnout system is typical railway facility to be in the way of conventional railway line's speed-up. The KNR(Korean National Railroad) has a speed limit regulation (130km/h) for the passing the turnout to guarantee a safety. This research had been performed to confirm the propriety of this regulation by using experimental and analytical way before it was carried out. The reasonableness of the speed-limit regulation was judged base on the several experiments. It was proved that the regulation was not useless as it had been regarded and very important guide at least up to now.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.97-110
• /
• 2021

This study estimated the delay factor, which is the ratio of travel time at the speed limit and travel time at the actual speed using real-time traffic information in Seoul. The actual travel speed on the road was lower than the maximum speed of the road and the travel speed was the slowest during the rush hour. As a result of accessibility analysis based on travel speed during the rush hour, the travel time at the actual speed was 37.49 minutes on average. However, the travel time at the speed limit was 15.70 minutes on average. This result indicated that the travel time at the actual speed is 2.4 times longer than that at the speed limit. In addition, this study proposedly defined the delay factor as the ratio of accessibility by the speed limit and accessibility to actual travel speed. As a result of delay factor analysis, the delay factor of Seoul was 2.44. The results by the administrative district showed that the delay factor in the north part areas of the Han River is higher than her south part areas. Analysis results after applying the relationship between road density and traffic volume showed that as the traffic volume with road density increased, the delay factor decreased. These results indicated that it could not be said that heavy traffic caused longer travel time. Therefore, follow-up research is needed based on more detailed information such as road system shape, road width, and signal system for finding the exact cause of increased travel time.

• The Journal of the Korea Contents Association
• /
• v.20 no.9
• /
• pp.430-438
• /
• 2020

Many local governments are reducing speed limits according to the "Safe Speed 5030" policy implemented by the government to reduce traffic accident deaths. In the urban road sections in many metropolitan cities where speed limit reduction is applied as a pilot project, the decrease effect of the traffic accident number and death count is shown; however, no study of the effect analysis on the road sections of medium and small cities (basic local government unit) is found. Therefore, this study investigated the travel speed, number of traffic accidents, and death count before and after the implementation of speed limit reduction, targeting some urban road sections in Pyeongtaek city and some provincial road sections in Icheon city among basic local governments, namely among medium and small cities in Seoul Metropolitan Area.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.955-956
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.761-762
• /
• 2009

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.388-394
• /
• 2018

When a ship is berthing on the pier using a mooring rope, excessive ship speeds may cause accidents where mooring rope is cut off. In order to prevent the mooring rope from breaking, there is need to know the approach speed limit of the ship. The purpose of this study is to estimate the berthing speed limit of a ship to prevent mooring fracture. Focus will be made to when the speed of the ship is unknown. In this study, we propose a method and procedure for estimating the berthing-speed limit based on the theory of ship resistance and the elasticity of the mooring rope. This method was found to be effective as it was observed that the mooring rope cannot be broken when it is estimated that the berthing-speed of a 135K LNG vessel, IWRC, and $6{\times}36$ steel wire mooring rope. The method proposed in this study will significantly contribute to preventing actual accidents related to mooring lines.

• Journal of Broadcast Engineering
• /
• v.20 no.6
• /
• pp.938-949
• /
• 2015

In this paper, we propose a robust speed-limit sign recognition system which is durable to any sign changes caused by exterior damage or color contrast due to light direction. For recognition of speed-limit sign, we apply CNN which is showing an outstanding performance in pattern recognition field. However, original CNN uses multiple hidden layers to extract features and uses fully-connected method with MLP(Multi-layer perceptron) on the result. Therefore, the major demerit of conventional CNN is to require a long time for training and testing. In this paper, we apply randomly-connected classifier instead of fully-connected classifier by combining random forest with output of 2 layers of CNN. We prove that the recognition results of CNN with random forest show best performance than recognition results of CNN with SVM (Support Vector Machine) or MLP classifier when we use eight speed-limit signs of GTSRB (German Traffic Sign Recognition Benchmark).