• Journal of Institute of Control, Robotics and Systems
• /
• 제21권9호
• /
• pp.881-887
• /
• 2015

The hardware-in-the-loop simulation (HILS) of a railway vehicle is crucial for overcoming the limitation of field tests of a railway vehicle. A brake HILS system for a railway vehicle was previously not able to test the performance of a speed-sensing system of a railway vehicle, since wheelset speeds were generated only by computer simulations. In this paper, we present a novel wheelset speed implementation of a brake HILS system for a railway vehicle. Four wheelset speeds of a brake HILS system for a car of a railway vehicle are implemented using four small-sized servomotors, whereas the speed sensors and pole wheels used in the brake HILS system are the actual ones of the railway vehicle. According to the simulated speeds of four wheelsets in the dynamic equations of motion, four servomotors generate wheel speeds in real time, and then the measured wheelset speeds are fed back to the computer simulation model. Moreover, in this paper, we improve the performance of wheelset speed measurement via the T method instead of the M method presently used in the field. The performances of wheelset speed implementation and speed-sensor operation are demonstrated by experimental works using a HILS system.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.40-45
• /
• 2003

Korea selected to introduce high-speed railway system from advanced countries in order to accumulate railway technologies and develop exiting domestic logistics system. After many twists and turns, we adopted to introduce France's high-speed railway called 'TGV'. Despite many difficulties along with trials and errors, it is expected that Korean high-speed railway will be brilliantly launched in April 2004, although it has been commissioned for multi-discipline tests. It is forecast that the opening of high-speed railway will bring us the epoch-making development of logistics system. However, what if there are really some problems in the operation of high-speed railway? We cannot consider and highlight only the positive aspects of our own high-speed railway. In terms of many challenging aspects we would face in the future, there would be some matters we must consider and point out in this opportunity. In this regard, the direction for developing high-speed railway stations requires the harmony between profitability and public benefits, which must involve compatibility with other traffice systems and practical policies to secure competitive edges.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2795-2803
• /
• 2011

Due to speed acceleration, higher requirements have been put forward to high speed railway communication and signaling system. The railway applications, including intra-train, train to ground and trackside networks, demand larger bandwidth, higher reliability and shorter response time from railway communication networks to ensure security operation and passenger communication. However, the current railway communication and signaling system has lagged behind the railway development, so advanced communication technologies are needed to improve the current situation. This paper presents high speed railway communication and signaling system based on 4G LTE technology, introduces its network architecture, key technology and analyzes its technical advantages compared with GSM-R system. According to analysis, LTE based high-speed railway communication network is more effective and reliable.

• Journal of the Korean Society for Railway
• /
• 제11권2호
• /
• pp.115-119
• /
• 2008

Korean Train Express (KTX) has opened to commercial traffic since 2004 at maximum speed 300km/h. As the speed of the train becomes higher, the conditions of the rail affect the behavior of the running train. To secure the safety and reliability of high speed railway, it is necessary to inspect rail irregularities and to maintain the rail regularly. The authors designed the high speed rain measurement system over 300km/h. And we installed the system to Korea High-speed Railway (HSR 350x). In this paper, we introduce the high speed rail measurement system for HSR 350x and show verification of the performance of the system through test runs.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제10권8호
• /
• pp.953-958
• /
• 2015

Generally, Urban railway have special characteristics with short distance journey and minimum headway intercity transportation. These days, urban railway operators choose the driverless operation system without driver. On the contrary, Conventional & high speed railway utilize for long distance and high speed running. Because of special conditions of freight railway operation compared with urban railway, operation of conventional & high speed railway is showed very different characteristics. In this paper, We compares different operation scheme of urban railway and conventional & high speed railway and then present condition for train control system based on radio.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제66권6호
• /
• pp.975-980
• /
• 2017

Overhead catenary system of electric railway has overlap sections which devide and tighten trolley wire supplying electric power to train, where current collection performances may become worse according to railway speed-up. Current collection tests conducted at 400 km/h test-bed section of Honam high-speed railway show that balanced line arrangement at overlap section is needed to secure current collection without arc generation between trolley wire and train current collection device. This paper proposes a design procedure of the overlap section to allow for tension increase and uplift of the trolley wires according to railway speed-up. By applying the proposed procedure to the overhead catenary system of Honam high-speed railway, it is suggested that the minimum span length should be 33.2 m for railway speed-up to 350 km/h and 43.7 m for speed-up to 400 km/h.

• Journal of Korean Port Research
• /
• 제7권2호
• /
• pp.5-17
• /
• 1993

The decline of railway industry been a world-wide phenomenon. Recently, increased attention has therefore of railway systems has considerable impacts on the existing transport systems. Korea is expecting a era of high-speed railway and thus the need for the preexamination of such system emerges. This study is therefore concerned with the impacts on the conventional railway systems of the planned high-speed railway and its policy implication. The results revealed that the high-speed railway is almost exclusive to the conventional railway system emerges. This study is therefore concerned with the impacts on the conventional railway systems of the planned high-speed railway and its policy implication. The results revealed that the high-speed railway is almost exclusive to the conventional railway systems. The only impact is to induce some users of the conventional railway services, resulting in some excess track capacity of Kyungbu line. It dose however appear not to have any influence on the level of service for the conventional passenger services and rail freight transport. Consequently, it appears desirable to pay as much attention to the conventional railway systems as to the high-speed railway.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1785-1790
• /
• 2010

This study examined the overall measurement system for the power dispersed high speed railway with 400km/h of maximum test speed. The measuring system evaluating an efficiency, stability and reliability is important for developing the high speed railway. In order to organize the comprehensive measuring system, it is needed to determined the test item, a number of channel and the specifications of the measurement system. In this study, we made lists for the performance evaluation tests of the next generation high speed railway expected to be developed in the future, and prepared generalization channel sheets for the specification of the overall measurement system. In addition, the specifications for the measuring system were discussed and synthesized.

• International Journal of Railway
• /
• 제5권2호
• /
• pp.84-88
• /
• 2012

Derailment due to wheel failure would cause a tremendous social and economical cost in service operation. It is necessary to evaluate quantitatively the safety with respect to high-speed train. Although the safety of railway wheel has been ensured by an regular inspection, all critical defects cannot be detected in inspection cycles and the wheel has been replaced because a defect quickly become critical for safety. Therefore, it is important to calculate quantitatively the fracture limit and remnant life of damaged railway wheel in wheel-rail system. In present paper, the critical crack size of wheel for high-speed train is simulated based on fracture scenario and the safety of wheel is evaluated.

• Journal of the Korean Society for Railway
• /
• 제5권3호
• /
• pp.158-166
• /
• 2002

In this paper, we introduce the software and hardware of the measurement system for on-line testing and evaluation of high speed railway. The test items focus on the verification of the performance and acquirement of the technical data of the high speed railway system. The software controls the hardware of the measurement system, perform the analysis and calculation of measurement data and acts as interface between users and the system hardware. For this purpose, three programs a measuring program, a monitoring program and post-processing program are developed. The detailed test scenario is in the process of development to closely follow the process of development and design of the system.