• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4179-4188
• /
• 2021

This study identifies efficient earthquake intensity measures (IMs) for seismic performances and fragility evaluations of the reactor containment building (RCB) in the advanced power reactor 1400 (APR1400) nuclear power plant (NPP). The computational model of RCB is constructed using the beam-truss model (BTM) for nonlinear analyses. A total of 90 ground motion records and 20 different IMs are employed for numerical analyses. A series of nonlinear time-history analyses are performed to monitor maximum floor displacements and accelerations of RCB. Then, probabilistic seismic demand models of RCB are developed for each IM. Statistical parameters including coefficient of determination (R²), dispersion (i.e. standard deviation), practicality, and proficiency are calculated to recognize strongly correlated IMs with the seismic performance of the NPP structure. The numerical results show that the optimal IMs are spectral acceleration, spectral velocity, spectral displacement at the fundamental period, acceleration spectrum intensity, effective peak acceleration, peak ground acceleration, A95, and sustained maximum acceleration. Moreover, weakly related IMs to the seismic performance of RCB are peak ground displacement, root-mean-square of displacement, specific energy density, root-mean-square of velocity, peak ground velocity, Housner intensity, velocity spectrum intensity, and sustained maximum velocity. Finally, a set of fragility curves of RCB are developed for optimal IMs.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.881-885
• /
• 2002

This paper presents the performance and the algorithm of a 1/3-octave band spectrum control system. The system is developed to provide various spectrums in a high intensity acoustic chamber. The required spectrum, which usually comes from launch vehicle company, starts from 25Hz band and ends 10kHz band. Automatic spectrum control system is preferred since the system requires short settling time to guarantee the safety of test objects and to reduce the amount of operating gas. The developed system adapted a PCI data-acquisition/signal-generation board installed in a personal computer to implement whole control logic. The control software used three cascade digital Butterworth filters using software. The filers are designed following ANSI S1.11 standard to implement 1/3 octave band filter bank. The graphical user interface of the system guides the user to follow standard operation procedure. The averaged control spectrum showed less than 0.05 dB in every running 1/3-octave band.

• 한국지반공학회지:지반
• /
• 제14권2호
• /
• pp.9-20
• /
• 1998

지진에 의한 지반의 액상화 현상으로 인하여 지하에 매설된 생활관거가 파괴될 가능성은 대단히 높다. 만일 지진이 발생하는 즉시 지반의 액상화 가능성을 판단할 수 있다면 관거가 파괴됨으로 인한 피해를 최소한으로 감소시킬 수 있다. 액상화 현상이 지반에 발생하는 동시에 이를 판별하기 위해서는 지표에서 진동의 이력을 측정함과 동시에 해석함으로써 가능하다. 본 논문에 서는 지표에서 측정된 가속도 기록을 통하여 지반의 액상화 가능성과 액상화된 지반의 두께를 평가하는 방법을 제시하고자 한다. 이를 위하여 실제로 측정된 지진 기록을 해석하고, 또한 진동대시험이 실시되었다. 이 결과 액상화 지반의 판별과 액상화된 지반의 두께는 지반 최대 가속도와 스펙트럼 강도로 결정할 수 있음이 증명되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.386.2-386
• /
• 2002

This paper reports the performance and the Algorithm of an 1/3-octave band spectrum control system. The system is developed to provide various required spectrums in a high intensity acoustic chamber. The required spectrums, which usually comes from launch vehicle specification, starts from 25㎐ band and ends 10,000㎐. Short settling time is required to guarantee the safety of test objects and reduce the amount of operating gas. (omitted)

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.193-198
• /
• 2009

Recently, characteristic research by the changes in the spectrum, one of the factors that influence analysis of maximum output power of PV module, has been studied. In this paper, a one-day intensity of solar irradiation, change of spectrums with time and electrical output for spectrums are analyzed. As a result, blue-rich wavelength compared with red-rich wavelength has large variation of solar irradiance with time, so we recognized that change of solar irradiance is dominated by variation of blue~rich wavelength. Also in same intensity of solar irradiance, electrical output in blue-rich wavelength was 3-8 % higher than one in red-rich wavelength.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.930-938
• /
• 2004

This paper presents the noise source identification of a car A/V system. There are two different kinds of noise sources noise generated by loading mechanism and rattle noise by externally forced vibration. A dynamometer has been made to produce stationary inertia to the loading mechanism of A/V system. Sound pressure spectra and sound intensity were measured by operating the dynamometer setup as various motor speeds, and the results were analyzed. A dominant rattle noise source about A/V system's components has been found by multi-dimensional spectral analysis. Residual spectrum method was applied for eliminating coherence between the vibration sources. In result, the dominant rattle noise source was identified by partial coherent output spectrum of individual vibration component.

• 생명과학회지
• /
• 제6권3호
• /
• pp.193-197
• /
• 1996

The action spectrum for mycelial growth and fruitbody primordium formation in Pleurotus ostreatus has been studied by irradiation at various wavelengths. Effective wavelengths. Effective wavelengths were distributed from near ultraviolet to blue region of spectrum. The most effect of light was observed in the region between 340 to 500 nanometers. The light intensity required to obtain of the maximum effect at the most effective wavelengths(430-500nm), was over 6.8 mW/Cm$^{2}$. Up to 6.8 mW/Cm$^{2}$, the primordium formed about 25 hr after the start of illumination. The higher the light intensity, the earlier the formation of the primordium formation : Up to about 6.8 mW/Cm$^{2}$.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.55-62
• /
• 2003

This paper describes the effect of the incidence angle on the turbulence structure in the wake of a turbine rotor blade at the low inlet free-stream turbulence level. For three incidence angles of -5, 0 and 5 degrees, mid-span energy spectrum as well as mid-span profiles of mean velocity magnitude and turbulence intensity are reported at three downstream locations in the wake. Vortex shedding frequencies are obtained from the energy spectrum. The result shows that as the incidence angle changes from-5 to 5 degrees, the boundary layer on the suction surface tends to be thickened, which results in widening of the wake. Strouhal numbers based on the shedding frequencies have a nearly constant value of 0.3, independent of tested incidence angles.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (2)
• /
• pp.655-657
• /
• 2003

이 연구는 위성 탐색 사진으로부터 물체에 대한 고유의 전자파 강도(intensity) 값을 이용해 형상을 판별해 내는 특성 연구이다. 영상 스펙트럼에 의해 형상 특성을 연구하고. 물질이 가지고 있는 고유의 스펙트럼 수치 값을 이용해서 목적물 즉, 물, 녹지, 침엽수, 활엽수와 지형과 지물. 농경지와 초지 등을 판별해 낼 수 있는 알고리즘으로부터 프로시저를 개발하고, 이를 응용한 판별시스템을 구현하였다.

• Wind and Structures
• /
• 제25권1호
• /
• pp.39-61
• /
• 2017

Buffeting induced resonance (BIR) of hangers on long-suspension bridges is briefly reviewed, including mechanism and experimental verification. Taken the Xihoumen suspension bridge as a numerical example, sensitivities of the BIR of hangers to wind properties are investigated, including types of wind spectrum, turbulence intensity, and spacial coherence of wind fluctuations. Numerical simulations indicate that the BIR of hangers occur to both cases of different wind spectra, showing that it is insensitive to types of wind spectrum. On the other hand, it is found that the turbulence intensity affects buffeting of main cables almost in a linear manner, and so it does to the BIR of the hangers; however, the resonance factors, namely the ratio of the response of the hanger to that of the main cable, are little affected by the turbulence intensity. The spacial coherence of the wind fluctuations, although plays an important role on the buffeting responses of the main structure, has no substantial effects on the BIR of the hangers. Finally, replacement of steel strand with CFRP material has been verified as a very effective countermeasure against the BIR of hangers.