• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.7
• /
• pp.412-417
• /
• 2000

This paper offer fundamental materials about Partial Discharge(PD) detection by electromagnetic waves. All spectrum data-usually used as grape- can be used as numbers. And then the average of background noise spectrum strength was made. Average value subtract from every data. Then average value appeared, graphed. The graph was compared with the magnitude of charge. The shape of changes is similar, and the change of electric field strength could be seen in one sight. When the magnitude of charge is over than 100[pC], antenna can detect partial discharge. So this method will be very useful to diagnosis of insulation. It the performance of the antenna used in this experiment is analyzed, good results can be obtained.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.59-64
• /
• 2018

A cooperative spectrum sensing has been proposed to improve the sensing performance in cognitive radio (CR) network. However, cooperative sensing causes additional overhead for reporting the result of local sensing to the fusion center. In this paper, we propose a technique to reduce the overhead of data transmission of cooperative sensing for applying the quantum data fusion technique in cognitive radio networks by omitting the lowest quantized in the local sensed results. If a CR node senses the lowest quantized level, it will not send its local sensing data in the corresponding sensing period. The fusion center can implcitly know that a spectific CR node sensed lowest level if there is no report from that CR node. The goal of proposed sensing policy is to reduce the overhead of quantized data fusion scheme for cooperative sensing. Also, our scheme can be adapted to all quantized data fusion schemes because it only deal with the form of the quantized data report. The experimental results show that the proposed scheme improves performance in terms of reporting overhead.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.35-41
• /
• 2000

This paper considers the consturction of 24/25 I-NRZI (Interleaved - Non Return to Zero Inverse) modulator designs for DVCR (Digital Video Cassette Recorder), and size of validity bit in order to store the amplitude value of square-wave and the standard data ( sine and cosine coefficients) at ROM Table that to acceptable the spectrum standard. The validity bit size of the standard data and the amplitude value of square-wave that to store at ROM Table are affected the size of pilot signal on the output spectrum, and the hardware size of modulator. At the designable 24/25 I-NRZI modulator, we simulated using random pattern (F0,F1,F2) that to verification the output data of the spectrum. Moreover, the resultant of the spectrum analysis, at the optimizing value, is 0.065 on the amplitude value of square-wave, and 3bit on the size of bit in order to store the standared data at ROM Table. In order to verify the hardware of designable 24/25 I-NRZI modulator, we perform to modeling of C-language firstly, and coding to Verilog HDL (Cadence Verilog XL) and synthesized using Synopsys (Library "Samsung KG75") tool as a base of spectrum results. In a foundation of this result, we are considered the size of hardware. In this paper, a considerable 24/25 I-NRZI modulator designable less than 10,000 gates as that is improved consturction as regards the path method of pre-coder etc, and able to application digital camcorders as now practical use.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.91-97
• /
• 2000

Once a response spectrum is estimated for the site, if there is a need of generating realistic earthquakes time histories considering seismic sources and path effects, one alternative is to use statistical phase characteristics based on real earthquake records other than assuming arbitrary duration and envelope curves. In this study, statistics of group delay times derived from Japanese strong earthquake data were used for phase generation to fully capture the stochastic property of earthquakes. The result shows that simulated earthquake time histories can be generated according to earthquake magnitude and distances with target response spectrum.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.27-32
• /
• 2000

Microearthquake records with magnitude 2.6~3.1 recorded in the southeastern part of the Korean peninsula during 1994~1998 are analyzed. Total of 42 records consisted of 12 events instrumented at 7 stations. The response spectra with the above data shows that the frequency range of the dominant response is about 10~25Hz and are compared with the standard response spectrum. The result implies that the characteristics of the microearthquake ground motion differ from those of standard response spectrum presented in US NRC Reg. Guide 1.60 especially at higher frequencies.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.148-149
• /
• 2002

중적외선 분광학(mid-IR spectrocopy) 에서는 2.5～15 $\mu\textrm{m}$ 의 파장을 갖는 적외선을 시료에 조사하여 absorption spectrum 을 측정하는데 이 대역은 주로 분자들의 fundamental band 가 나타나는 영역으로 각 분자의 characteristic absorption band 가 비교적 깨끗하게 분리되어 있어 특정 compound 의 존재 유무를 확인하는데 쓰여 왔다. 그러나 보통의 경우에 시료에는 한 가지 화합물만이 존재하는 것이 아니고 여러 가지 화합물이 섞여 있는 경우가 많다. (중략)

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.257-260
• /
• 1993

A new method of spindle waveform detection is presented for the automated analysis of sleep EEG. The method is based on the combined application of signal conditioning in the time-domain and local spectrum analyzing in the frequency-domain. The overall detection system is implemented and, tested in real-time with a total of 24 hour data obtained from four subjects. The result shows an average agreement of 86.7% with the visually inspected result.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1727-1732
• /
• 2004

For the purpose of monitoring by ultrasonic test of the ball bearing conditions in rotating machinery, a system for their diagnosis was developed. ultrasonic technique is used to detect abnormal conditions in the bearing system. And various data such as frequency spectrum, energy and amplitude of ultrasonic signals, and ultrasonic parameters were acquired during experiments with the simulated ball bearing system. Based on the above results and practical application for power plant, algorithms and judgement criteria for diagnosis system was established.

• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.87-87
• /
• 2004

FIMS(Far-Ultraviolet Imaging Spectrograph)는 2003년에 발사된 과학 위성 1호의 주탑재체이다. FIMS는 우주의 고온 플라즈마에서 방출되는 원적외선(900-1750$\AA$) 영역을 2$\AA$의 분해능을 갖고 관측하는 기기로써 관측 영역의 범위는 선택된 천문학 target과 지구 북반구의 aurora에서 지구 대기의 glow까지 포함하고 있다. 본 연구에서는 위성발사 후 과학 위성 1호의 FIMS로부터 관측되어 내려온 data 중에서 aurora 관측 자료를 이용하여 aurora의 특성 spectrum에 대하여 분석해 보고자 한다. (중략)

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.725-728
• /
• 1988

Image restoration technique using dual sensor is presented in this paper. Digital Radiography image (1024xlO24) is obtained by conventional resolution sensor. We also obtain local DR image data by high resolution sensor. Two dimensional maximum entropy power spectrum estimation (2-D ME PSE) is applied to low resolution image and high resolution image for the purpose of the power spectrum estimation of each image. A class of linear algebraic restoration filter, parametric projection filter (PPF), is derived from the power spectrums of each image. It is shown that the noise energy may be considerably reduced through the PPF.