• 센서학회지
• /
• 제27권4호
• /
• pp.232-236
• /
• 2018

A radiation detection sensor was developed and characterized by combining three types of CsI(Tl) scintillators and an array-type SiPM to detect the radioactive contamination of discharged water in real time. The characterization results showed that type 3 exhibited the most desirable characteristics in response linearity (R-square: 0.97889) according to detection sensitivity and incident radiation dose. Furthermore, in terms of spectral characteristics, type 3 exhibited 16.54% at 0.356 MeV (the emission gamma ray energy of $^{133}Ba$), 10.28% at 0.511 MeV (the emission gamma ray energy of $^{22}Na$), 9.68% at 0.356 MeV (the emission gamma ray energy of $^{137}Cs$), and 2.55% and 4.80% at 1.173 MeV and 1.332 MeV (the emission gamma ray energies of $^{60}Co$), respectively. These measurements confirmed the good energy characteristics. The results were used to evaluate the spectral characteristics and energy linearity in a mixed source using type 3 with the best detection characteristics. It was confirmed that the gamma ray peaks of $^{133}Ba$, $^{22}Na$, $^{137}Cs$, and $^{60}Co$ were well resolved. Moreover, it was confirmed that R-square, which is an indicator of energy linearity, was 0.99986. This indicates a good linearity characteristic. Based on this study, further commercialization studies will contribute to measurements in real time and to the management of the contamination caused by radioactive wastewater or radioactive material leakage, which originate from facilities that use radioactive isotopes or care facilities.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.315-326
• /
• 2010

This study examined the overlapping resonances in the systems involving 1 open and 2 closed channels using the phase-shifted version of multichannel quantum-defect theory (MQDT). The results showed that 21 patterns for the q reversals in the autoionization spectra are possible depending on the relative arrangements of the two simple poles and roots of the quadratic equations. Complete cases could be generated easily using the q zero planes determined using only 3 asymmetric spectral line profile indices. The transition of the spectra of the coarse interloper Rydberg series from the lines into a structured continuum by being dispersed onto the entire Rydberg series was found. The overall behavior of the time delays was found to be governed by the dense Rydberg series, which is quite different from the one of the autoionization cross sections that is governed by an interloper, indicating that different dynamics prevail for them. This is in contrast to the two channel system where both quantities behave similarly. The dynamics obtained in the presence of overlapping resonances is as follows. The absorption process is instant and dominated by a transition to the interloper line. This process is followed by rapid leakage into the dense Rydberg series, which has a longer residence time before ionization than that of the interloper state. This is because the orbiting period is proportional to $\upsilon^3$ so that an excited electron has a shorter lifetime in the interloper state belonging to a lower member of the Rydberg series.

• 천문학회지
• /
• 제44권2호
• /
• pp.49-58
• /
• 2011

We calculate the energy spectra of cosmic ray (CR) protons and electrons at a plane shock with quasi-parallel magnetic fields, using time-dependent, diffusive shock acceleration (DSA) simulations, including energy losses via synchrotron emission and Inverse Compton (IC) scattering. A thermal leakage injection model and a Bohm type diffusion coefficient are adopted. The electron spectrum at the shock becomes steady after the DSA energy gains balance the synchrotron/IC losses, and it cuts off at the equilibrium momentum $p_{eq}$. In the postshock region the cutoff momentum of the electron spectrum decreases with the distance from the shock due to the energy losses and the thickness of the spatial distribution of electrons scales as $p^{-1}$. Thus the slope of the downstream integrated spectrum steepens by one power of p for $p_{br}$ < p < $p_{eq}$, where the break momentum decreases with the shock age as $p_{br}\;{\infty}\;t^{-1}$. In a CR modified shock, both the proton and electron spectrum exhibit a concave curvature and deviate from the canonical test-particle power-law, and the upstream integrated electron spectrum could dominate over the downstream integrated spectrum near the cutoff momentum. Thus the spectral shape near the cutoff of X-ray synchrotron emission could reveal a signature of nonlinear DSA.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.170-176
• /
• 2013

Power converters produce a vast range of harmonics, subharmonics and interharmonics. Harmonics analyzing tools based on the Fast Fourier Transform (FFT) assume that only harmonics are present and the periodicity intervals are fixed, while these periodicity intervals are variable and long in the presence of interharmonics. Using FFT may lead to invalid and undesired results due to the above mentioned issues. They can also lead to problems such as frequency blending, spectral leakage and the picket-fence effect. In this paper, the group-harmonic weighting (GHW) approach has been presented to identify the interharmonics in a power system. Afterwards, a modified GHW has been introduced to calculate the proper bandwidth for analyzing the various values of interharmonics. Modifying this method leads to more precise results in the FFT of a waveform containing inter harmonics especially in power systems with a fundamental frequency drift or frequency interference. Numerical simulations have been performed to prove the efficiency of the presented algorithm in interharmonics detection and to increase the accuracy of the FFT and the GWH methods.

• Journal of Communications and Networks
• /
• 제13권4호
• /
• pp.327-338
• /
• 2011

With the incitation to reduce power consumption and the aggressive reuse of spectral resources, there is an inevitable trend towards the deployment of small-cell networks by decomposing a traditional single-tier network into a multi-tier network with very high throughput per network area. However, this cell size reduction increases the complexity of network operation and the severity of cross-tier interference. In this paper, we consider a downlink two-tier network comprising of a multiple-antenna macrocell base station and a single femtocell access point, each serving multiples users with a single antenna. In this scenario, we treat the following beamforming optimization problems: i) Total transmit power minimization problem; ii) mean-square error balancing problem; and iii) interference power minimization problem. In the presence of perfect channel state information (CSI), we formulate the optimization algorithms in a centralized manner and determine the optimal beamformers using standard convex optimization techniques. In addition, we propose semi-decentralized algorithms to overcome the drawback of centralized design by introducing the signal-to-leakage plus noise ratio criteria. Taking into account imperfect CSI for both centralized and semi-decentralized approaches, we also propose robust algorithms tailored by the worst-case design to mitigate the effect of channel uncertainty. Finally, numerical results are presented to validate our proposed algorithms.

• Journal of electromagnetic engineering and science
• /
• 제15권1호
• /
• pp.53-58
• /
• 2015

For the testing of nonlinear power amplifiers, this paper suggests an approach to design optimized multisine signals that could be substituted for the original modulated signal. In the design of multisines, complex coefficients should be determined to mimic the target signal as much as possible, but very few methods have been adopted as general solutions to the coefficients. Furthermore, no solid method for the phase of coefficients has been proven to show the best resemblance to the original. Therefore, in order to determine the phase of multisine coefficients, a time-domain nonlinear optimization method is suggested. A frequency-domain-method based on the spectral response of the target signal is also suggested for the magnitude of the coefficients. For the verification, multisine signals are designed to emulate the LTE downlink signal of 10 MHz bandwidth and are used to test a nonlinear amplifier at 1.9 GHz. The suggested phase-optimized multisine had a lower normalized error by 0.163 dB when N = 100, and the measurement results showed that the suggested multisine achieved more accurate adjacent-channel leakage ratio (ACLR) estimation by as much as 12 dB compared to that of the conventional iterative method.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.228-236
• /
• 2011

The ${\Delta}\;V_{10}$ or 10-Hz flicker index, as a common method of measurement of voltage flicker severity in power systems, requires a high computational cost and a large amount of memory. In this paper, for measuring the ${\Delta}\;V_{10}$ index, a new method based on the Adaline (adaptive linear neuron) system, the FFT (fast Fourier transform), and the PSO (particle swarm optimization) algorithm is proposed. In this method, for reducing the sampling frequency, calculations are carried out on the envelope of a power system voltage that contains a flicker component. Extracting the envelope of the voltage is implemented by the Adaline system. In addition, in order to increase the accuracy in computing the flicker components, the PSO algorithm is used for reducing the spectral leakage error in the FFT calculations. Therefore, the proposed method has a lower computational cost in FFT computation due to the use of a smaller sampling window. It also requires less memory since it uses the envelope of the power system voltage. Moreover, it shows more accuracy because the PSO algorithm is used in the determination of the flicker frequency and the corresponding amplitude. The sensitivity of the proposed method with respect to the main frequency drift is very low. The proposed algorithm is evaluated by simulations. The validity of the simulations is proven by the implementation of the algorithm with an ARM microcontroller-based digital system. Finally, its function is evaluated with real-time measurements.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제23권3호
• /
• pp.141-147
• /
• 2017

국내에서 개발 중인 장비의 기술 유출 방지와 국내 환경에 맞는 적외선 신호 분석 S/W 개발에 대한 요구가 있어 왔다. 본 논문에서는 적외선 영상을 생성하기 위한 적외선 신호 분석 S/W에 대한 구성과 특정 파장대역의 적외선 영상 생성 방법 및 분석 방법에 대해 나타내었다. 개발된 적외선 신호 분석 S/W는 표면온도 해석 결과와 물체의 자체방사 성분 및 반사성분 그리고 대기경로 복사성분을 통해 적외선 영상을 생성하도록 구성되어 있다. 대부분의 상용 S/W에는 복사 대비값 및 탐지거리 또는 탐지율 분석 기능이 포함되어 있지 않지만 개발된 S/W에는 생성된 적외선 영상을 이용하여 위협도 분석할 수 있는 기술을 포함하고 있다.

• 한국전자파학회논문지
• /
• 제10권2호
• /
• pp.247-256
• /
• 1999

유전체 코팅된 유한한 두께의 주기적인 슬롯을 갖는 명행명판 도파관으로부터 누설파 안테나를 H-편파 경 우에 대하여 해석하였다. 이러한 구조에 대해 슬롯영역의 전자계는 명행평판 도파관의 TM 모드의 합으로 전 개하고 그 외의 모든 영역의 전자계는 역퓨리에 변환을 이용하여 파수영역 형태로 표현되어진다. 경계조건을 적용하여 선형동차 방정식을 유도한다. 슬롯 폭과 슬롯 두께, 유전체층 두께, 슬롯 개수의 영향이 위상 상수. 누설 상수 및 복사패턴 등과 같은 복사 특성에 미치는 영향을 조사하였다. 유한한 슬롯 개수의 결과와 무한 구조의 결과와 비교하여 잘 일치함을 확인하였다.

• 식물병연구
• /
• 제15권2호
• /
• pp.112-119
• /
• 2009

Botrytis cinerea가 생산하는 phytotoxin이 병원성에 미치는 영향을 조사하던 중에 두 개의 새로운 phytotoxin을 발견하였다. 1994년과 1996년에 여러 식물체로부터 분리한 Botrytis cinerea 균주들을 기주별, 지역별, 형태적 특성별로 25개의 균주를 선별한 후 단포자 분리를 실시하였다. 22균주는 오이, 토마토, 고추 담배, 배추 등 5가지 식물에 대해 강하거나 중간 정도의 병원성을 보였다. 그러나 KJ 균주를 포함한 3균주는 병원성이 매우 약하였다. 식물에 대한 phytotoxicity를 조사하기 위하여 25균주의 배양 여액을 담배잎에 leaf-wounding assay를 실시한 결과 2-16균주가 가장 강한 활성을 보였다. 따라서 2-16 균주의 배양액을 ethyl acetate로 추출한 후 flash silica gel column chromatography, silica gel column chromatography, Sephadex LH-20 column chromatography, preparative TLC 및 preparative HPLC 등을 통하여 두 개의 phytotoxin을 분리하였다. 분리한 phytotoxin을 질량분석과 핵자기 공명분석을 통해 구조동정을 실시한 결과 3-O-acetyl botcinol과 3-O-acetyl botcinolide로 동정하였다. 두 개의 물질은 leaf-wounding bioassay에서 잎에 괴사를 일으켰으며, 또한 담배 잎에서 심각한 전해질 누출을 일으켰다. 두 생물검정에서 3-O-acetyl botcinol이 3-O-acetyl botcinolide보다 강한활성을보였다. B. cinerea가 생산한 두 개의 phytotoxin에 대해서는 본 논문에서 처음으로 보고하는 바이다.