• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.999-1002
• /
• 2002

In this paper, we proposes an adaptive method for reducing the computational overhead of fine-to-coarse MRME at the finest resolution level by considering for the spatial and spectral characteristics between wavelet decomposition levels simultaneously. As we know, there is high correlation between the adjacent blocks and it can give the very important clue to estimate motion at finest level. So, in this paper, using the initial motion vector and the adjacent motion vector in the coarsest level, we determine the optimal direction that will be minimized the estimation error in the finest level. In that direction, we define the potential searching region within the full searching region that is caused to increase much computational overhead in the FtC method. Last, in that region, we process the efficient 2-step motion estimation. and estimate the motion vector at finest resolution level. And then, this determined motion vector is scaled to coarser resolutions. As simulation result, this method is similar to computational complexity of the CtF MRME method and very significantly reduces that of the FtC MRME method. In addition, they provide higher quality than CtF MRME, both visually and quantitatively

• Speech Sciences
• /
• v.12 no.4
• /
• pp.53-70
• /
• 2005

A Vowel of speech signals are multicomponent signals composed of AM-FM components whose instantaneous frequency and instantaneous amplitude are time-varying. The changes of emotion states cause the variation of the instantaneous frequencies and the instantaneous amplitudes of AM-FM components. Therefore, it is important to estimate exactly the instantaneous frequencies and the instantaneous amplitudes of AM-FM components for the extraction of key information representing emotion states and changes in speech signals. In tills paper, firstly a method decomposing speech signals into AM - FM components is addressed. Secondly, the fundamental frequency of vowel sound is estimated by the simple method based on the spectrogram. The estimate of the fundamental frequency is used for decomposing speech signals into AM-FM components. Thirdly, an estimation method is suggested for separation of the instantaneous frequencies and the instantaneous amplitudes of the decomposed AM - FM components, based on Hilbert transform and the demodulation property of the extended Fourier transform. The estimates of the instantaneous frequencies and the instantaneous amplitudes can be used for modification of the spectral distribution and smooth connection of two words in the speech synthesis systems based on a corpus.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.119-124
• /
• 2015

Speech enhancement has been required as a preprocessor for a noise robust speech recognition system. Codebook-based Speech Enhancement (CBSE) is highly robust in nonstationary noise environments compared with conventional noise estimation algorithms. However, its performance is severely degraded for the codevector combinations that have lower correlation with the input signal since CBSE depends on the trained codebook information. To overcome this problem, only the reliable codevector combinations are selected to be used to remove the codevector combinations that have lower correlation with input signal. The proposed method produces the improved performance compared to the conventional CBSE in terms of Log-Spectral Distortion (LSD) and Perceptual Evaluation of Speech Quality (PESQ).

• ETRI Journal
• /
• v.43 no.6
• /
• pp.966-977
• /
• 2021

Filterbank multicarrier with offset quadrature amplitude modulation (FBMC-OQAM) is an attractive alternative to the orthogonal frequency division multiplexing (OFDM) modulation technique. In comparison with OFDM, the FBMC-OQAM signal has better spectral confinement and higher spectral efficiency and tolerance to synchronization errors, primarily due to per-subcarrier filtering using a frequency-time localized prototype filter. However, the filtering process introduces intrinsic interference among the symbols and complicates channel estimation (CE). An efficient way to improve the CE in FBMC-OQAM is using a technique known as windowed frequency domain averaging (FDA); however, it requires a priori knowledge of the window length parameter which is set based on the channel's frequency selectivity (FS). As the channel's FS is not fixed and not a priori known, we propose a k-nearest neighbor-based machine learning algorithm to classify the FS and decide on the FDA's window length. A comparative theoretical analysis of the mean-squared error (MSE) is performed to prove the proposed CE scheme's effectiveness, validated through extensive simulations. The adaptive CE scheme is shown to yield a reduction in CE-MSE and improved bit error rates compared with the popular preamble-based CE schemes for FBMC-OQAM, without a priori knowledge of channel's frequency selectivity.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.805-810
• /
• 2019

We present a time-frequency analysis algorithm based on the multitaper method and the state-space frameworks. In general, time-frequency representations have a trade-off between the time duration and the spectral bandwidth by the uncertainty principle. To optimize the trade-off problems, the short-time Fourier transform and wavelet based algorithms have been developed. Alternatively, the authors proposed the state-space frameworks based on the multitaper method in the previous work. In this paper, we develop a real-time algorithm to estimate variances and spectrum using the state-space framework. We test our algorithm in spectral analysis of simulated data.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.11-20
• /
• 2015

This paper deals with optimal power allocation for channel estimation of orthogonal frequency-division multiplexing uplinks in time-varying channels. In the existing literature, the estimation of time-varying channel response in an uplink environment can be accomplished by estimating the corresponding channel parameters. Accordingly, the optimal power allocation studied in the literature has been in terms of minimizing the mean square error of the channel estimation. However, the final goal for channel estimation is to enable the application of coherent detection, which usually means high spectral efficiency. Therefore, it is more meaningful to optimize the power allocation in terms of capacity. In this paper, we investigate capacity with imperfect channel estimation. By exploiting the derived capacity expression, an optimal power allocation strategy is developed. With this developed power allocation strategy, improved performance can be observed, as demonstrated by the numerical results.

• Journal of electromagnetic engineering and science
• /
• v.6 no.4
• /
• pp.203-208
• /
• 2006

Channel estimation and data detection for OFDM systems over time- and frequency-selective channels are investigated. Relying on the complex exponential basis expansion channel model, a pilot-embedded channel estimation scheme with low computational complexity and spectral efficiency is proposed. A periodic pilot sequence is superimposed at a low power on information bearing sequence at the transmitter before modulation and transmission. The channel state information(CSI) can be estimated using the first-order statistics of the received data. In order to enhance the performance of channel estimation, we recover the transmitted data which can be exploited to estimate CSI iteratively. Simulation results show that the proposed method is suitable for doubly-selective channel estimation for the OFDM systems and the performance of the proposed method can be better than that of the Wiener filter method under some conditions. Through simulations, we also analyze the factors which can affect the system performances.

• The Korean Journal of Applied Statistics
• /
• v.33 no.2
• /
• pp.115-122
• /
• 2020

K-means clustering uses a spherical or elliptical metric to group data points; however, it does not work well for non-convex data such as the concentric circles. Spectral clustering, based on graph theory, is a generalized and robust technique to deal with non-standard type of data such as non-convex data. Results obtained by spectral clustering often outperform traditional clustering such as K-means. In this paper, we review spectral clustering and show important issues in spectral clustering such as determining the number of clusters K, estimation of scale parameter in the adjacency of two points, and the dimension reduction technique in clustering high-dimensional data.

• Structural Engineering and Mechanics
• /
• v.53 no.3
• /
• pp.607-623
• /
• 2015

The wind-induced dynamic response of large-span flexible structures includes two important components-background response and resonant response. However, it is difficult to separate the two components in time-domain. To solve the problem, a relational expression of wavelet packet coefficients and power spectrum is derived based on the principles of digital signal processing and the theories of wavelet packet analysis. Further, a new approach is proposed for separation of the background response from the resonant response. Then a numerical example of frequency detection is provided to test the accuracy and the spectral resolution of the proposed approach. In the engineering example, the approach is applied to compute the power spectra of the wind-induced response of a large-span roof structure, and the accuracy of spectral estimation for stochastic signals is verified. The numerical results indicate that the proposed approach is efficient and accurate with high spectral resolution, so it is applicable for power spectral computation of various response signals of structures induced by the wind. Moreover, the background and the resonant response time histories are separated successfully using the proposed approach, which is sufficiently proved by detailed verifications. Therefore, the proposed approach is a powerful tool for the verification of the existing frequency-domain formulations.

• Korean Journal of Remote Sensing
• /
• v.22 no.5
• /
• pp.305-311
• /
• 2006

Although there have been several attempts to estimate forest LAI using optical remote sensor data, there are still not enough evidences whether the NDVI is effective to estimate forest LAI, particularly in fully closed canopy situation. In this study, we have conducted a simple correlation analysis between LAI and spectral reflectance at two different settings: 1) laboratory spectral measurements on the multiple-layers of leaf samples and 2) Landsat ETM+ reflectance in the close canopy forest stands with fieldmeasured LAI. In both cases, the correlation coefficients between LAI and spectral reflectance were higher in short-wave infrared (SWIR) and visible wavelength regions. Although the near-IR reflectance showed positive correlations with LAI, the correlations strength is weaker than in SWIR and visible region. The higher correlations were found with the spectral reflectance data measured on the simulated vegetation samples than with the ETM+ reflectance on the actual forests. In addition, there was no significant correlation between the forest.LAI and NDVI, in particular when the LAI values were larger than three. The SWIR reflectance may be important factor to improve the potential of optical remote sensor data to estimate forest LAI in close canopy situation.