• 제목/요약/키워드: Specification Criteria

검색결과 204건 처리시간 0.036초

현장타설 말뚝의 수중부 콘크리트 강도에 대한 고찰 (Study on Compressive Strength of Cast-in-situ Concrete Pile)

  • 심재원;전경수;김낙영;박찬민
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.564-569
    • /
    • 2009
  • Due to the uneasy controllable qualities of the substructures such as pile and foundation, which are laid on underground, geotechnical engineers have applied conservative criteria to them. Therefore, the specification criterion of cast-in-situ concrete pile, which allows only one fourth of the compressive strength of structural capacity, has forced geotechnical designers to consider the most uneconomical design regardless of satisfying the grade of quality-control, required performance, construction cost and so on. Thus, in this study, we proposed the less conservative criteria on the strength of concrete pile, based on the experimental testing results of cast-in-situ concrete piles.

  • PDF

ATM ABR의 공평성들을 위한 새로운 스케쥴링 알고리즘 (New Scheduling Algorithm for Fairness Criteria of ATM ABR)

  • 오미진;강정림;정경택;정동수
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
    • /
    • pp.81-84
    • /
    • 2002
  • The WRR scheduling algorithm is widely used in ATM networks due to its simplicity and the low cost of hardware implementation. It guarantees minimum cell rate according to the weight of each queue. The fairness is a important factor for ABR service. That is, Scheduling algorithm allocates network resources fairly to each VC. In this paper, we propose a scheduling algorithm for satisfying the two fairness criteria, MCR plus equal share and Maximum of MCR or Max-Min share, among the six criteria defined by ATM Forum TM 4.1 specification. The WRR, Nabeshima et al, and the proposed scheduling algorithms are compared with respect to fairness and convergence time throughout experimental simulation.

  • PDF

초대형 선박용 차세대 컨테이너 크레인의 설계기준 (Design Criteria of a Future Container Crane for Megaships)

  • 이숙재;홍금식
    • 한국해양공학회지
    • /
    • 제18권6호
    • /
    • pp.101-107
    • /
    • 2004
  • In this paper, the design criteria of future container crane for megaships are investigated. The current loading/unloading capacity of a typical container crane, roughly 30 moves/hr, is too law to meet the requirements of future super containerships, which are expected over 15,000 TEU. After examining the transition of containerships through the years and studying the research trend in developed countries, the specifications of the container crane that can Meet a 15,000 TEU containership are proposed. The structure, trolley and hoist mechanism, outreach, backreach, capacity, speeds, durability, and stability of the future container crane are described.

성능보증 시방서 개발을 위한 아스팔트 포장 성능기준 연구 (A Study on Performance Criteria of Asphalt Pavements for Development of Performance-based Warranty Specification)

  • 여현동;남정희;서영찬;정진훈
    • 대한토목학회논문집
    • /
    • 제31권6D호
    • /
    • pp.793-801
    • /
    • 2011
  • 기존 도로포장 시방서는 계약자에게 포장 수명에 상관없이 재료 및 시공 상의 주어진 조건만을 만족하면 되도록 요구하고 있다. 이와 같은 시방 기준으로는 도로포장 기술 개발에 한계가 있으며 포장파손 발생 시 발주자와 계약자 간에 분쟁이 발생할 소지가 있다. 이러한 문제점을 개선하기 위하여 성능보증 계약제도를 도입하려는 연구가 도로포장 분야에서 진행되고 있다. 성능보증 계약제도는 계약자에게 재료와 공법을 마음대로 선정할 수 있는 기회를 부여하고 주어진 기간 동안 일정 수준 이상의 성능을 유지하도록 하는 제도이다. 성능보증 계약제도의 성공적인 도입을 위해서는 성능보증 시방서의 주요 요소인 포장의 성능인자와 임계한도가 먼저 정의되어야 한다. 본 연구에서는 미국 몇 개 주에서 사용되는 성능보증 계약제도에 관한 문헌을 검토하여 아스팔트 포장의 성능인자, 임계한도, 그리고 성능보증 기간에 관한 조사를 실시하였다. 또한 국내 고속국도 중 24개 노선과 16개 지역의 일반국도 노선에서 아스팔트 포장의 성능에 영향을 미치는 주요 파손을 조사하고 분석하여 미국의 사례와 비교하였다. 본 연구결과를 근거로 국내 아스팔트 포장에 대한 합리적인 성능보증 시방이 개발될 것으로 예상된다.

중국수출(中國輸出) 기성복(旣成服)의 치수에 관한 연구(硏究)-KS규격(規格)을 중심(中心)으로 한 중국((中國) 여성복 (女性服)및 남성복(男性服)의 대응(對應)치수- (A Study on The Sizes of Ready-made Clothes to Export to China - Corresponding Sizes of China Women's and Men's Ready-made Clothes Sizes Based on KS size specification-)

  • 심부자
    • 패션비즈니스
    • /
    • 제11권4호
    • /
    • pp.152-172
    • /
    • 2007
  • This research suggest the correspondent sizes of women's and men's ready-made clothes to export to China on the basis of KS size specification. The results of this study, with the cooperation of Sejung and Searte Companies exporting clothes to Ningbo City, Zhejiang Province in China, are as follows: 1. Corresponding Dimensions of China Women's Clothes According to Morrison's relative deviation method, the body measurement characteristics of Chines and Korean women in their 30s and 40s were compared. As a result, Chinese women were bigger in height, arm length, abdomen girth, and upper arm girth but smaller in shoulder length and shoulder width. The cluster analysis for body type classification was as follows: Type 1, tall and well-developed, was 34.8%. Type 2 with weaker upper body, medium height, narrow shoulders and a slim waist was 45%. Type 3 with stronger upper body, shortest height and wide shoulders was 20.2%. 2. Corresponding Dimensions of China Men's Clothes Based on the drop standard of KS K 0050, the body types of Chinese men in their 20s were classified. A body types were 55.77%, Y body types were 32.16%, B body types were 11.55% and BB body types were 1.51%. According to the criteria of ready-made dimensions of normal body type suggested in Korea Standards, and in consideration of the basic distribution reality of body dimensions, representative 5 sizes were selected. 3. The corresponding size specification of China women's and men's clothes based on those of KS size specification were presented here, showing product sizes and physical items in detail.

Web기반 공사시방서 작성 시스템 개발 방안 (A Development of a Web Based Supporting System for Writing Construction Project Specification)

  • 김균태;김태송;구재동
    • 한국건설관리학회:학술대회논문집
    • /
    • 한국건설관리학회 2001년도 학술대회지
    • /
    • pp.501-506
    • /
    • 2001
  • 건설공사의 계약문서에는 설계도면, 공사시방서 등이 포함되나, 국제적인 수준의 계약문서로서 다소 미흡하게 작성되었던 것이 사실이다. 이러한 문제점을 해결하기 위하여 '98년 1월부터는 설계도서 작성시 공사시방서를 작성하도록 하였다. 그러나 제도의 도입초기이므로 참고할 만한 자료도 충분하지 않으며, 작성경험 및 능력도 부족한 실정이다. 이러한 점을 보완하기 위하여 개발된 기존 시스템은 네트워크를 고려하지 않아 시스템 활용과 유지관리 및 갱신에 한계가 있다. 본 연구에서는 기존 시스템을 개선하여, 전문시방서, 설계기준, 하위기술기준 둥 건설공사기준 DB를 구축하고, Web을 통해 구축된 DB를 검색·활용하여 공사시방서를 실시간으로 작성하는 시스템 개발 방안을 제시하였다. 이러한 시스템은 공사시방서 작성시, 표준시방서, 전문시방서 등 다양한 정보를 조회하여 수준높은 공사시방서를 작성하는데 일조할 것으로 기대된다.

  • PDF

조경공사 표준시방서 변화특성과 개선방향 연구 - 식재공사를 중심으로 - (A Study on Improvement and Change Properties of Landscape Construction Standard Specification - Focused on Planting -)

  • 유주은;전진완;이상석
    • 한국조경학회지
    • /
    • 제41권1호
    • /
    • pp.60-70
    • /
    • 2013
  • 본 연구는 조경공사 표준시방서 식재공사의 분류체계, 기술방식, 품질기준의 개정시기별 변화특성을 분석하고, 국외 사례와의 비교를 통하여 개선방향을 제시하고자 하였다. 이에 본 연구의 결과 및 제언은 다음과 같다. 1. 개정을 통해 다양한 세부공종이 신설 수정되었으나 상 하위분류가 맞지 않아 시방내용이 상충되고 있으므로 비슷한 공사끼리의 재분류가 필요하다. 2. 시방서 내용을 용이하게 전달하기 위한 기술방식으로 수정이 이루어졌다. 그러나 구체성이 떨어지는 애매모호한 표현과 용어로 유지되고 있는 굴취시 뿌리분의 깊이, 지주재 강도에 관한 내용은 수정이 필요하다. 또한 표토의 채취시기, 약제 살포시기 등은 계량화될 필요가 있으며, 시방규정의 공정성을 고려하여 감독자의 지시에 따르도록 작성된 기준은 수정되어야 한다. 3. 시대적 패러다임과 사용자의 요구를 반영한 품질기준이 제 개정되었으나 구체적이지 않아 수정이 필요하며, 관련 기준들의 국외 사례를 참고하여 수목재료의 품질수준, 식재적기, 굴취시 뿌리분의 크기, 성능기준 등을 개선해야 한다. 개정을 통해 식재공사의 세부공종별 재료 및 시공방법에 대한 내용은 갖춰졌다. 그러나 구체성이 떨어지고 명확하지 않은 기준들로 시방서의 현장 활용을 저해하고 있다. 이에 표준시방서의 분류체계, 기술방식, 품질기준의 문제점 도출과 개선방향의 제시가 필요하며, 이는 향후 표준시방서 개정시 참고자료가 될 수 있다.

중국(中國) 수출(輸出) 남성(男性) 기성복(旣成服) 치수에 관(關)한 연구(硏究) -한국(韓國) 남성복(男性服) 치수를 중심(中心)으로 한 중국(中國) 남성복(男性服) 대응(對應)치수의 설정(設定) 및 제시(提示)-

  • 심부자
    • 패션비즈니스
    • /
    • 제11권2호
    • /
    • pp.155-171
    • /
    • 2007
  • This research aims to present the corresponding dimensions of China men's clothes on the basis of size specification of Korea men's suits. The results of this study, with the cooperation of Sejung Company exporting men's clothes to Ningbo City, Zhejiang Province in China, are as follows: 1. Based on the drop standard of KS K 0050, the body types of Chinese men in their 20s were classified. A body types were 55.77%, Y body types were 32.16%, B body types were 11.55% and BB body types were 1.51%. 2. According to the criteria of ready-made dimensions of normal body type suggested in Korea Standards, and in consideration of the basic distribution reality of body dimensions, representative 5 sizes were selected. 3. Research jackets by different sizes were produced and went through wearing tests. The means of 1st wearing test were 3.86, 4.09, 4.09, 3.57, and 3.69. The mean of 2nd wearing test of 88-73-170 size was 4.32. 4. The corresponding size specification of China men's clothes based on those of Korea men's suits were presented here, showing product sizes and physical items in detail.

Misuse Case 모델을 이용한 CC기반의 보안요구사항 분식 및 명제 방법론 (A Methodology for CC-based Security Requirements Analysis and Specification by using Misuse Case Model)

  • 최상수;장세진;최명길;이강수
    • 정보보호학회논문지
    • /
    • 제14권3호
    • /
    • pp.85-100
    • /
    • 2004
  • 모든 정보시스템은 보안기능이 강화된 정보보호시스템이라 할 수 있으며, 정보보호시스템의 품질을 높이기 위해서는 초기 요구사항 분석 단계에서 보안요구사항을 정형적이며 일관적으로 분석 및 명세하여야 한다. 본 논문에서는 UML의 Use Case 모델을 확장한 Misuse Case 모델을 이용하여 보안요구사항을 분석 및 명세하는 모델과 프로세스를 제시하였으며, 도출된 보안기능요구사항들을 제품화한 비용효과적인 보안제품 선정 알고리즘을 제시하였다. 제시한 모델 및 프로세스를 통해 개발된 정보보호시스템의 품질을 제고할 수 있을 것이다

SPSL을 이용한 NTFS 다중 사용 권한에 대한 명세 및 검증 (The Specification and Verification Using SPSL about NTFS's Multiuser Privileges)

  • 강미영;김일곤;최진영;강인혜;강필용;이완석
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2003년도 가을 학술발표논문집 Vol.30 No.2 (1)
    • /
    • pp.631-633
    • /
    • 2003
  • 시스템의 안전성을 평가하기 위해 프롤로그 기반의 명세 언어인 SPSL을 사용하여 보안 모델을 정형적으로 설계하였다. 보안 모델은 시스템의 3가지 컴포넌트, 시스템 보안 상태(system security states), 접근 통제 규칙(access control rules), 그리고 보안 기준(security criteria)으로 구성된다. 본 논문에서는 NTFS의 다중 사용 권한에 대한 보안 모델을 만들어서 3가지 컴포넌트를 명세하고 안전성 문제 해결 도구인 SPR[1]을 이용하여 검증하였다.

  • PDF