• 제목/요약/키워드: Special charge

검색결과 230건 처리시간 0.02초

Adaptive State-of-Charge Estimation Method for an Aeronautical Lithium-ion Battery Pack Based on a Reduced Particle-unscented Kalman Filter

  • Wang, Shun-Li;Yu, Chun-Mei;Fernandez, Carlos;Chen, Ming-Jie;Li, Gui-Lin;Liu, Xiao-Han
    • Journal of Power Electronics
    • /
    • 제18권4호
    • /
    • pp.1127-1139
    • /
    • 2018
  • A reduced particle-unscented Kalman filter estimation method, along with a splice-equivalent circuit model, is proposed for the state-of-charge estimation of an aeronautical lithium-ion battery pack. The linearization treatment is not required in this method and only a few sigma data points are used, which reduce the computational requirement of state-of-charge estimation. This method also improves the estimation covariance properties by introducing the equilibrium parameter state of balance for the aeronautical lithium-ion battery pack. In addition, the estimation performance is validated by the experimental results. The proposed state-of-charge estimation method exhibits a root-mean-square error value of 1.42% and a mean error value of 4.96%. This method is insensitive to the parameter variation of the splice-equivalent circuit model, and thus, it plays an important role in the popularization and application of the aeronautical lithium-ion battery pack.

3차원 전하 중첩법용 나선 전하의 특성에 관한 연구 (A Study on A Spiral Charge for 3 Dimensional Charge Simulation Method)

  • 민석원;박은서;송기현
    • 조명전기설비학회논문지
    • /
    • 제15권4호
    • /
    • pp.31-36
    • /
    • 2001
  • 본 논문은 765[kV] 송전선로의 풍소음 저감용 spiral rod의 전계를 계산하기 위해서 3차원 전하중첩법용 나선 전하의 특성에 관해 연구하였다. 본 연구에서 나선전하를 정현 함수 전하로 모의하는 것 보다 상수전하로 모의한 것이 전위오차가 적었고, 상수전하를 한 개로 모의하는 것 보다 2개를 배치하여 계산했을 때 spiral rod의 전하를 가장 잘 모의할 수 있는 것으로 나타났다.

  • PDF

코로나 케이지 내부에서의 풍소음 저감용 특수 다중도체 방식의 3차원 전계분포해석 II (3-Dimensional Analysis II on Electric Field of Special Conductor Bundle for Reducing Aeolian Noise In Corona Cage)

  • 민석원;송기현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.399-402
    • /
    • 2001
  • In this paper, 3-dimensional charge simulation method was applied to analyze electric field distributions of special conductor bundles equipped with spiral rods for reducing aeolian noise in a corona cage. Comparing electric field distributions of special conductor bundles in 765kV transmission tine with ones in corona case, we decide experimental voltages of special conductor bundles in corona cage.

  • PDF

765kV 송전선로용 특수 다중도체 방식의 코로나 잡음특성 및 전계분포 해석 (Analysis on Electric Field Distributions and Corona Characteristics of Special Conductor Bundles for 765kV Transmission Line)

  • 민석원;김용준;신구용;이동일;주문노;양광호
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제50권12호
    • /
    • pp.556-560
    • /
    • 2001
  • To solve aeolian noise, we have tried several special conductor bundles equipped with spiral rod and one kind of low aeolian noise conductor with a special shape. Charge simulation method was applied to analyze electric field distributions of them in transmission line and corona cage for investigating the corona characteristics. This paper describes the electric field distributions and the performances of audible noise and radio interference from the special bundles in 765 kV transmission line by using corona characteristics obtained from corona cage simulation.

  • PDF

수중발파 사례 연구 (A Case Study of Underwater Blasting)

  • 정민수;박종호;송영석
    • 화약ㆍ발파
    • /
    • 제22권3호
    • /
    • pp.57-64
    • /
    • 2004
  • 국내에서 적용되는 수중발파는 교량의 기초를 위한 수중 우물통 발파와 항만의 수로 증심 또는 준설을 위하여 적용되고 있다 그 중 교각의 기초를 위한 우물통 발파는 우물통내 물을 인위적으로 배수시켜 건조한 상태에서의 천공과 장약을 실시한 후 물을 다시 채운 후 수중에서의 발파를 수행하고 있어 전체적인 작업이 일반 노천발파와 동일하다 할 수 있다. 그러나 항만의 수로 증심과 준설을 위한 수중 발파는 수중 천공이 가능하도록 고안된 바지선을 이용하여 수중에서 천공과 장약 발파 작업이 이루어지는 특수성을 가지고 있다. 따라서 일반 터널이나 벤치발파와는 다르게 장약의 방법과 결선의 방법에 주의를 기울이지 않으면 수압에 의한 사압 등 어려운 조건하에서 불발이 야기될 수 있다. 본 사례연구는 국내 부산항 증심 준설공사에서 수중발파의 특수성을 고려하여 다이너마이트 (메가마이트 I)를 이용한 수중 발파의 장약량 선정과 파이프를 이용한 장약의 방법, 그리고 TLD를 이용한 기폭시스템이 수면위에서 기폭 될 수 있도록 부이를 이용한 결선방법을 적용하여 수중발파를 실시하고 사례별 결과를 비교하였다. 그 결과, 수중발파 장약량 설계에 따른 지발당장약량에 따른 진동의 예측과 실 계측을 통하여 예측 진동식의 타당성을 검증하였으며, 장약의 방법과 결선방법에 따라 발생될 수 있는 불발을 최소화시킬 수 있을 것이다. 따라서, 최적발파 효과와 안전한 발파를 수행하기 위하여, 천공경은 150mm이상, 화약은 고성능 수중 다이너마이트(메가마이트 II), 그리고 뇌관은 비전기뇌관을 적용하는 것이 가장 유리할 것으로 판단된다.

Control of $NaAlSiO_4:Eu^{2+}$ photoluminescence properties by charge-compensated aliovalent element substitutions

  • Kim, Jihae;Kato, Hideki;Kakihana, Masato
    • Journal of Information Display
    • /
    • 제13권3호
    • /
    • pp.97-100
    • /
    • 2012
  • We have conducted two kinds of the so-called charge-compensated aliovalent element substitutions to control the photoluminescence properties of $NaAlSiO_4:Eu^{2+}$ with a special focus on the enhancement of the excitation intensity at 400 nm. The aliovalent element substitutions include cation-cation and cation-anion co-substitutions according to the general formulas $Na_{1-x}M_xAl_{1+x}Si_{1-x}O_4:Eu^{2+}$ and $Na_{1-x}M_xAlSiO_{4-x}N_x:Eu^{2+}$ (M = $Mg^{2+}$, $Ca^{2+}$, and $Sr^{2+}$), respectively. The increase in the relative excitation intensity at 400 nm has been achieved in both types of the co-substitutions. Thus, the present research has demonstrated the effectiveness of the charge-compensated element substitution.

피크저감과 특례요금제를 고려한 ESS 경제성 분석 알고리즘에 관한 연구 (A Study on Economic Analysis Algorithm for Energy Storage System Considering Peak Reduction and a Special Tariff)

  • 손준호
    • 전기학회논문지
    • /
    • 제67권10호
    • /
    • pp.1278-1285
    • /
    • 2018
  • For saving electricity bill, energy storage system(ESS) is being installed in factories, public building and commercial building with a Time-of-Use(TOU) tariff which consists of demand charge(KRW/kW) and energy charge(KRW/kWh). However, both of peak reduction and ESS special tariff are not considered in an analysis of initial cost payback period(ICPP) on ESS. Since it is difficult to reflect base rate by an amount of uncertain peak demand reduction during mid-peak and on-peak periods in the future days. Therefore, the ICPP on ESS can be increased. Based on this background, this paper presents the advanced analysis method for the ICPP on ESS. In the proposed algorithm, the representative days of monthly electricity consumption pattern for the amount of peak reduction can be found by the k­means clustering algorithm. Moreover, the total expected energy costs of representative days are minimized by optimal daily ESS operation considering both peak reduction and the special tariff through a mixed-integer linear programming(MILP). And then, the amount of peak reduction becomes a value that the sum of the expected energy costs for 12 months is maximum. The annual benefit cost is decided by the amount of annual peak reduction. Two simulation cases are considered in this study, which one only considers the special tariff and another considers both of the special tariff and amount of peak reduction. The ICPP in the proposed method is shortened by 18 months compared to the conventional method.

풍소음 저감용 특수 다중도체 방식의 3차원 전계해석 (3-Dimensional Analysis on Electric Field of Special Conductor Bundle for Reducing Aeolian Noise)

  • 민석원;송기현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
    • /
    • pp.254-258
    • /
    • 2001
  • In this paper, 3-dimensional charge simulation method was developed to analyze electric field distributions of special conductor bundles equipped with spiral rods for reducing aeolian noise. When we applied this method to 765 kV double circuit transmission line, we found calculation error of this method was within a reasonable boundary of 1%.

  • PDF

코로나 케이지 내부에서의 풍소음 저감용 특수 다중도체 방식의 3차원 전계분포해석 (3-Dimensional Analysis on Electric Field of Special Conductor Bundle for Reducing Aeolian Noise In Corona Cage)

  • 민석원;송기현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 A
    • /
    • pp.359-361
    • /
    • 2001
  • In this paper, 3-dimensional charge simulation method was applied to analyze electric field distributions of special conductor bundles equipped with spiral rods for reducing aeolian noise in a corona cage. We found calculation error of this method was w a reasonable boundary of 0.5%.

  • PDF

Z자 형상을 갖는 히트파이프에 대한 열성능 연구 (A Study on the Thermal Performance of a Z-shaped Heat Pipe)

  • 박수용;부준홍
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 추계학술대회논문집B
    • /
    • pp.741-745
    • /
    • 2001
  • The necessity of a Z-shape heat pipe may occur in a special application such as a cooling module for an electronic equipment having a limited accessible space. Either of the two end part works as evaporator or condenser and the length of the middle part is 200mm. The heat pipe was made of 3/8 inch copper tube having 60 spiral groove with screw angle of 10 degrees. Water and acetone were used as working fluids. The fill charge ratio of the working fluid was varied for different values of thermal loads. The thermal resistance was calculated based on the temperature measurements along the heat pipe axis. The maximum thermal loads were 80W for water and 100W for acetone heat pipe. The optimum fill charge ratio was identified through a series of experiments.

  • PDF