• Journal of the military operations research society of Korea
• /
• v.3 no.2
• /
• pp.119-134
• /
• 1977

The goal of this study is to determine which is the better bomb; a general purpose bomb or a special bomb, from the point of view of cost-effectiveness of air munitions. What we call the special bomb is a laser guided bomb which adds a guidance control unit on the head of a general purpose bomb. Althrough their characteristics of explosion are the same, their effectivenesses are very defferent due to their probability of hitting the targets. Now, in order to measure their relative a effectiveness, we could select various enemy targets such as runway, radar, and then Ive could also calculate requirments of both bombs and firghter aircraft sorties according to the desired damage level of each target, Following above steps, we can derive the total costs and compare effectiveness. As a results of this study, when the attrition rate of aircraft is under $1.1\%$, the general purpose bomb is better than the laser guided bomb. Above $1.1\%$ attrition rate, we could say that luser guided bomb is the most economical bomb.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.1
• /
• pp.115-121
• /
• 2020

Recently avionics equipment and its integration are most important part for implementing high performance aircraft system. This trends are emphasized in the military or special purpose aircraft development program. Flight Test Bed Aircraft (hereafter FTB A/C) - by modified commercial aircraft - was key solution to verify function and performance of avionics system for complex aircraft development program for a while, but there are no experience to use it in domestic airspace of ROK. This paper would like to address what act and regulation is necessary to perform flight operation of FTB A/C with keeping a airworthiness and airspace control policy. and then willing to propose what do we do for improving aviation industry.

• Journal of Aerospace System Engineering
• /
• v.14 no.1
• /
• pp.54-61
• /
• 2020

For operating military aircraft, military certificate of airworthiness (MCA) must be obtained from military authority. Among procedures of general airworthiness certification, there is a military type certification process that aircraft design complies with military airworthiness certification criteria. The Surion is the first military rotorcraft which has obtained military type certificate, production validation and airworthiness certificate in Korea, and the Surion derivatives for special mission are being operated for government services. Based on Aviation Safety Act, in order to operate the Surion derivatives (military aircraft) for special purpose (such as emergency patient transportation and firefighting), the issuance of special airworthiness certificates was needed from civil airworthiness authority, and the restricted category type certification (RTC) is one of design approvals for special airworthiness certification to be streamlined. This study discussed the procedures for acquiring RTC for special purpose operation of the Surion derivatives classified as military derived aircraft, and suggested procedural ideas to improve Korean RTC system.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.1
• /
• pp.22-31
• /
• 2014

Military UAV(Unmanned Aerial Vehicle) operated as a RC(Remotely Control) model level within the limit of the military special use airspace until now. However, the high and medium altitude of URA(Unmanned Reconnaissance Aircraft) which the ROKAF have been trying to import recently is at the UAV level and needs the criteria for the classified airspace flights. The required flight criteria includes operator location, mission operation limit, equipment, etc., which are the principle and standard applied based on the airspace use for UAV. Also, the general flight rules, visual flight rules, instrument flight rules are required in order to have to be applied to the actual flight. Besides, an appliance regulation needs to be arranged regarding two-way communication, ATC and communication issue, airspace and area in-flight between UAS( Unmanned Aircraft System) users. An operation of the UAV in the air significantly requires the guarantee of the aircraft's capacity, and also the standardized flight criteria. A safe and smooth use is ensured only if this criteria is applied and understood by the entire airspace users. For the purpose, a standardized military UAV flight operations criteria that is to be applied for each airspace by UAV is to be prepared through analysis of the present state, a legend UAV system, and a special character analysis.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.37-72
• /
• 2016

In the aerospace field, besides special purpose airplanes, contracts for supply of various types of products such as prototypes, unmanned aerial vehicles and space launch vehicles are increasing. In the case of the contractor, it was planned to spend a large amount of money to supply the production, but if the purchase specification that presents the quality and performance standard of the product is poor or lacks the capacity to judge the performance, consuming enormous amounts of time and money. Even if the undertaker does not have the ability to supply the products with the required performance and quality to achieve the purpose of the contract, he/she must pay the cost of burial due to the incompleteness of the work and the compensation for the cancellation of the contract. In this case, the defendant ordered the plaintiff to supply the aircraft by the Happy Box method, which is capable of ILS Offset flight as specified in the Purchase Specification, but the plaintiff attempted to supply the aircraft by the RNAV method. Although the ILS ground signal can be inspected by the RNAV method, the aircraft manufactured in the manner claimed by the plaintiff does not have the ILS Offset flight function required by the purchase specification, so the defendant can not achieve the purpose required by the purchase specification. It was a question of whether a defendant's cancellation of contract was legitimate. The aircraft, which is the object of this contract, is a subordinate substitute, so the case contract is of undertaking. Therefore, in order to complete the work in this contract, the major structural parts of the aircraft must be manufactured as agreed and have the performance generally required in the social sense. However, the aircraft delivered by the plaintiff has serious defects because the defendant can not achieve the purpose required by the purchase specification due to the lack of the ILS Offset flight function required by the purchase specification. This deficiency is impossible for the plaintiff to repair, so the defendant 's cancellation of the contract is legitimate.

• Journal of Advanced Navigation Technology
• /
• v.3 no.1
• /
• pp.69-90
• /
• 1999

The Korean airspace is very much limited, but its users are many. Especially many special using airspaces for military aircraft are formulated within the Taegu Flight Information Region and it is so restricted for civil aircraft to use the military airspaces. However, as the demand of civil air traffic is increasing, positive cooperation among the users of the airspace is needed to cope with the demand and to uplift the utilitation of the Korean airspace. Most of airspace except airways within the FIR are restricted areas, prohibited areas or operation areas for the military purpose. This thesis shows how to improve the utilitation of the Korean airspace and how much economical benefit the suggestion gives.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.4
• /
• pp.21-26
• /
• 2019

The purpose of this study is to suggest a method for the efficient preventive maintenance of aircraft gas turbine engine turbine blades. For this study, the types and characteristics of gas turbine engines and its turbine blades were studied, the turbine blade defect types that caused an In-Flight Shut Down(IFSD) were analyzed, the blade failure rate according to the blade life cycle was analyzed through the Weibull distribution, one of the statistical techniques. Through these research results, it is possible to supplement the problems of the life cycle management and maintenance method of the turbine blade, and to suggest the measures to strengthen the preventive maintenance of the turbine blade. In this analysis, when total cycle of turbine blade exceeds 18,000 cycles, the failure rate is over 98%, and then the special management measures are required.

• Journal of the Society of Disaster Information
• /
• v.7 no.4
• /
• pp.273-285
• /
• 2011

This research present actual conditions on realization about safety of observable individual and country, terror countermeasure from danger of terrorism which special guards have. To achieve these purposes, 400 special guards were sampled using the convenience sampling method and collected data through questionnaire from self-administration method. the collected data are in statistics of p<.05 levels. As the result, we drew following conclusions. Special guards thought that terror might occur most in 'aircraft, rapid-transit railway, subway, and bus'. It was no difference in society demography(p>.05). In type of terror, 'bomb terror' seemed to happen most, and they recognized that biochemistry terror and factor terror, and hostage terror may happen in society demography. Purpose of terror was thought that 'political purpose' may be the biggest, and 'ideological purpose' and 'social purpose' joined the remainder. According to society demography, woman's realization about terror was higher than man in two low variables. According to age, image of terror was high in 40 more than 20. According to educational background, university graduate were higher than a high-school diploma in two low variables. According to place of work, metropolis was higher than small and medium-sized city.

• The Korean Journal of Air & Space Law and Policy
• /
• v.32 no.1
• /
• pp.225-285
• /
• 2017

In regard to the regulations related to the RPA(Remotely Piloted Aircraft), which is sometimes called in other countries as UA(Unmanned Aircraft), ICAO stipulates the regulations in the 'RPAS manual (2015)' in detail based on the 'Chicago Convention' in 1944, and enacts provisions for the Rules of UAS or RPAS. Other contries stipulates them such as the Federal Airline Rules (14 CFR), Public Law (112-95) in the United States, the Air Transport Act, Air Transport Order, Air Transport Authorization Order (through revision in "Regulations to operating Rules on unmanned aerial System") based on EASA Regulation (EC) No.216/2008 in the case of unmanned aircaft under 150kg in Germany, and Civil Aviation Act (CAA 1998), Civil Aviation Act 101 (CASR Part 101) in Australia. Commonly, these laws exclude the model aircraft for leisure purpose and require pilots on the ground, not onboard aricraft, capable of controlling RPA. The laws also require that all managements necessary to operate RPA and pilots safely and efficiently under the structure of the unmanned aircraft system within the scope of the regulations. Each country classifies the RPA as an aircraft less than 25kg. Australia and Germany further break down the RPA at a lower weight. ICAO stipulates all general aviation operations, including commercial operation, in accordance with Annex 6 of the Chicago Convention, and it also applies to RPAs operations. However, passenger transportation using RPAs is excluded. If the operational scope of the RPAs includes the airspace of another country, the special permission of the relevant country shall be required 7 days before the flight date with detail flight plan submitted. In accordance with Federal Aviation Regulation 107 in the United States, a small non-leisure RPA may be operated within line-of-sight of a responsible navigator or observer during the day in the speed range up to 161 km/hr (87 knots) and to the height up to 122 m (400 ft) from surface or water. RPA must yield flight path to other aircraft, and is prohibited to load dangerous materials or to operate more than two RPAs at the same time. In Germany, the regulations on UAS except for leisure and sports provide duty to avoidance of airborne collisions and other provisions related to ground safety and individual privacy. Although commercial UAS of 5 kg or less can be freely operated without approval by relaxing the existing regulatory requirements, all the UAS regardless of the weight must be operated below an altitude of 100 meters with continuous monitoring and pilot control. Australia was the first country to regulate unmanned aircraft in 2001, and its regulations have impacts on the unmanned aircraft laws of ICAO, FAA, and EASA. In order to improve the utiliity of unmanned aircraft which is considered to be low risk, the regulation conditions were relaxed through the revision in 2016 by adding the concept "Excluded RPA". In the case of excluded RPA, it can be operated without special permission even for commercial purpose. Furthermore, disscussions on a new standard manual is being conducted for further flexibility of the current regulations.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.6
• /
• pp.61-73
• /
• 2017

Purpose - Aviation control, navigation, and aircraft control in the air transportation area are very specialized. Each part is in progress for safety, efficiency, automation, and further. On the other hand co-work among each part including knowledge sharing has been inattentive for many reasons. The purpose of this research is to show how practicians and professionals in the air transportation area perceive the issue of knowledge sharing and to recall the necessity of knowledge sharing in the area. And we try to find ways to activate the knowledge sharing in the area. Research design, data, methodology - For the research, we inquired into whether practicians and professionals think knowledge sharing can effect safe aviation positively or not and what steps are necessary to activate knowledge sharing in the area. We adopted survey method using questionnaires for current practicians and interview for specialists. The survey and interview results were analyzed using regression analysis and AHP method. The interview for specialists and analyzing the results using AHP was to investigate what are the precedence factors to activate the knowledge sharing. Results - First, practicians perceive that knowledge sharing will affect aviation safe positively. Second objective knowledges such as, tower air traffic control procedure of aviation control area, flight principle and structure of aircraft control area, instrument landing system of navigation area, for knowledge sharing of each area were identified. Also the precedence factors such as, knowledge absorbability of personal factor, personal expectation of result of expectation factor, leadership of management of Structure factor, method of knowledge spread of application factor for knowledge sharing were found. Conclusions - Knowledge sharing for practicians and professionals in the aviation area is very important especially from the perspective of safety. However, for various many reasons including the environment of each special area that focusing on their own area, knowledge sharing has not been emphasized. We found that practicians in the area feel that knowledge sharing is necessary and helpful. For it, each practician's active participation is the most important and many ways such as chatting room to share knowledge are to be developed. And the organization culture should be changed to encourage knowledge sharing.