• Journal of the Institute of Convergence Signal Processing
• /
• v.23 no.1
• /
• pp.37-43
• /
• 2022

Drones, one of the 4th industrial technologies that are expanding from military use to industrial use, are being actively used in the search missions of the National Police Agency and finding missing persons, thereby reducing interest in a wide area and the input of large-scale search personnel. However, legal review of police drone operation is continuously required, and the importance of advanced system for related operations and analysis of captured images in connection with search techniques is increasing at the same time. In this study, in order to facilitate recording, preservation, and monitoring in the concept of precise search and monitoring, it is possible to achieve high efficiency and secure golden time when precise search is performed by constructing spatial information based on photo rather than image data-based search. Therefore, we intend to propose a spatial information construction technique that reduces the resulting data volume by adjusting the unnecessary spatial information completion rate according to the size of the subject. Through this, the scope of use of drone search missions for large-scale areas is advanced and it is intended to be used as basic data for building a drone operation manual for police searches.

• Journal of Environmental Impact Assessment
• /
• v.10 no.1
• /
• pp.73-83
• /
• 2001

Web based integrated sewer management system was developed for the analysis of sewer flow and for the optimal operation of sewer works using ArcView and SWMM. SWMM and ArcView were dynamically linked together using Avenue in order to construct user-friendly information management system. The developed system was applied to the residential area in Choonchun city to verify its utilities. All the relevant field data were analyzed on the basis of the developed system, and the modeling of sewer flow was implemented using RUNOFF, EXTRAN, TRANSPORT in SWMM. This system is now in the process of connection to the management system of stormwater, surface and subsurface environment in order to develop an integrated environmental management system. Futhermore, this system will be a critical part of overall control system of sewer works including sewer network and wastewater treatment plant. As this system can provide comprehensive prediction of flow and pollution profiles, it could serve as a tool not only for the optimal management, but also for the decision support system to examine the efficiency of planning and implementation of sewer projects.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.203-211
• /
• 2008

Bridges have various functions. There are not only a connection between 2 zones, but also a objee as a landmark. But movable bridges used in canal in order to pass ships. We can classify according to type of driving system, for example, swing, bascule, lift, arching, rotation, etc. I will suggest classification of various driving mechanism in the world.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.3 s.26
• /
• pp.35-40
• /
• 2003

In these days, damages from localized heavy rain or typhoon are increase and people are making constant effort to work out countermeasures. Especially, by apply GIS with prompt extraction of information and objective analysis, we could demonstrate more effectively. For that reason, in this research we make the connection between rainfall-runoff model and HEC-RAS which calculate automatically and inquire out the dangerous zone easier way by describing the result with the connection between the Map Object and MFC. Most of all, this research will be very useful to forecast and prepare the disaster because it could plot plane figures, longitudinal sections and cross sections at the same time to help understand the damaged situation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.179-188
• /
• 2014

Social overhead capital (SOC) facilities are being threatened continuously by abnormal climate events that are increasing globally. For disaster response, rapid decision making on evacuation routes and other matters is critical. For this purpose, spatiotemporal information that combine data on disasters and SOC facilities needs to be utilized. This information is separately collected by government agencies and public organizations, and is not managed in an integrated manner. For rapid disaster response, an integrated management of separately collected disaster data and the creation of such information as the safety and damages on SOC facilities are required. To achieve this goal, it is essential to build inventories that integrate all the related information to support decision making indispensable for disaster response. In this study, a development plan for an integrated inventory management system based on the management and connection of inventories to support rapid decision making for disaster response is proposed. This system can collect and standardize data related to disasters and SOC facilities that are being managed separately and provide integrated information in line with the needs of users. The proposed system can be used as a decision making tool for proactive disaster response.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.2
• /
• pp.105-115
• /
• 2010

Recently, High-rise building are irregular-shaped to be city landmarks and function as vertical cities to enable the efficient use of land. 3T (Twisted, Tilted & Tapered) designs are being suggested for irregular buildings and studies to develop new structural system have been actively made to satisfy slender shape ratio. In diagrid system, not only gravity load but also lateral load is delivered based on the triangular shape of diagrid, so most of columns are eliminated. Because shearing force is delivered by the axial behavior (tensile/compressive) of diagrid to minimize shearing deformation, the system is more applicable to irregular buildings than existing system where shearing force is delivered by the columns. In this study, the process of selecting connection details and the structural safety of the selected details are verified using the finite element analysis with focus given to the construction overview of the Cyclone Tower. However, the relersed methods of stress concentration are suggested and the performance of stress concentration relieves that it's suggested for the appropriate cap plate thickness and extended length.

• Korean Journal of Remote Sensing
• /
• v.31 no.3
• /
• pp.215-226
• /
• 2015

Normally, aero photography using UAV uses about 430 MHz bandwidth radio frequency (RF) modem and navigates and remotely controls through the connection between UAV and ground control system. When using the exhausting method, it has communication range of 1-2 km with frequent cross line and since wireless communication sends information using radio wave as a carrier, it has 10 mW of signal strength limitation which gave restraints on life my distance communication. The purpose of research is to use communication technologies such as long-term evolution (LTE) of smart camera, Bluetooth, Wi-Fi and other communication modules and cameras that can transfer data to design and develop automatic shooting system that acquires images to UAV at the necessary locations. We conclude that the android based UAV filming and communication module system can not only film images with just one smart camera but also connects UAV system and ground control system together and also able to obtain real-time 3D location information and 3D position information using UAV system, GPS, a gyroscope, an accelerometer, and magnetic measuring sensor which will allow us to use real-time position of the UAV and correction work through aerial triangulation.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.9
• /
• pp.9-20
• /
• 2018

There are many large and small spaces in the interior of the building, and these spaces are arranged and connected to form a systematic spatial structure. A structure is a collection of several parts to form a whole. In other words, the spatial structure in architecture can be seen as a whole organized and organized as individual unit spaces are gathered together. Therefore, in order to understand the spatial structure, we first need to define the unit spaces that form part, how they are interconnected and arranged, and then understand how and how these unit spaces are organized to form a whole. The main purpose of this study is to study the structural system of space based on the shape information of space on architectural plane. This means interpreting the process and method of how the unit spaces defined as a certain shape on the architectural plane are organized step by step, integrated into a higher level, and eventually integrated into one whole. In this paper, the shape and layout of the unit space are identified in the architectural plan, the connection relation is defined, and expressed in the network form. And suggests a new methodology for interpreting the organizational process in which the following spaces are integrated as a whole. This new methodology is based on human perceptual characteristics. When people recognize an object, they recognize the object partly and completely. We want to explain the relationship between parts of space and the whole according to their characteristics.

• Journal of Korea Multimedia Society
• /
• v.6 no.3
• /
• pp.384-396
• /
• 2003

Hybrid query processing method is used for preventing server overload that is created by heavy user connection in Web GIS. In Hybrid query processing method, both server and client participate in spatial query processing. But, Hybrid query processing method is restricted in scalability of server and it can't be fundamentally solution for server overload. So, it is necessary for Web GIS to be brought in web clustering technique. In this thesis, we propose load-balancing method that uses proximity of query region. In this paper, we create tile groups that have relation each tile in same group is very close, and forward client request to the server that can have maximum rate of buffer reuse with considering characteristic of spatial query. With out load balancing method, buffet in server is optimized for exploring spatial index tree and increase rate of buffer reuse, so it can be reduced amount of disk access and increase system performance.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.390-396
• /
• 2008

Storybooks, especially those for children, may contain illustrations. An automated system for generating illustrations would help the production process of storybook publishing. In this paper, we propose a method for automatically generating layouts of objects during generating illustrations. In generated layouts, it is preferred to avoid unnecessary overlap between objects, corresponding to the spatial information in storybooks. We first define a representation scheme for spatial information in natural language sentences using tree structures and predicate-argument structures. Unification of tree structures and Region Connection Calculus are then used to manipulate the information and generate corresponding illustrations.