• 한국태양에너지학회 논문집
• /
• 제24권3호
• /
• pp.93-100
• /
• 2004

This study aims to presents the applicability of economic measures for renewable energy The basic principle and method of economic analyses were investigated and total life cycle cost considering environmental costs according to $CO_2$ generation. In case study, adaptation of new small wind power system to buildings were proved to produce a profit if it is considered the environmental cost and increment of energy prices. And so the economic measures can be used not only for the investment decisions for economic analysis but also for the comparative analysis of environmental cost and economic profits.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.183-185
• /
• 2004

Despite high cost, the underground power distribution system has been preferred by utilities and customers due to its stability and good living environment. Utilities, however, are burdened with the cost of installation as the service region of underground power system is getting enlarged. In this paper, a design method is proposed in order to reduce the construction cost of underground distribution system. That is an optimum algorithm, which can increase the total number of pipes in a limited space compared with a conventional design method. As a result, the proposed design method can reduce efficiently the construction cost of underground distribution system.

• 한국산업융합학회 논문집
• /
• 제24권1호
• /
• pp.69-77
• /
• 2021

The widely used low-cost design methodology for IoT devices is very popular. In such a networked device, memory is composed of flash memory, SRAM, DRAM, etc., and because it processes a large amount of data, memory design is an important factor for system performance. Therefore, each device selects optimized design factors such as function, performance and cost according to market demand. The design of a memory architecture available for low-cost IoT devices is very limited with the configuration of SRAM, flash memory, and DRAM. In order to process as much data as possible in the same space, an architecture that supports parallel processing units is usually provided. Such parallel architecture is a design method that provides high performance at low cost. However, it needs precise software techniques for instruction and data mapping on the parallel architecture. This paper proposes an instruction/data mapping method to support optimized parallel processing performance. The proposed method optimizes system performance by actively using hardware and software parallelism.

• 대한가정학회지
• /
• 제37권2호
• /
• pp.127-144
• /
• 1999

The purposes of this study were to identify the housing maintenance cost, imputed rent fee and total housing cost of households living in rental house, to analyze the factors related to their housing maintenance cost, imputed rent fee and total housing cost and to investigate the factors contributing to total housing cost to total household income ratio. The data used for these purposes, was 97 KHPS of Daewoo Economic Research Institute. Sample size of households living in rental house, was 663. Statistics performed for the analysis were frequencies, percentiles, t-test, Lorenz cutie and Gini coefficient, Tobit analysis, OLS and Logistic analysis. The results of this study were as fellows: First, monthly cost of monthly rent & maintenance and repairs of households living in rental house with a deposit was lower than rental house, while the imputed rent fee of households living rental house with a deposit was higher than monthly rent households'And, total housing cost of households living in rental house with a deposit was higher than monthly rent households'. Second, Gini coefficient of the housing maintenance cost was 0.440, Gini coefficient of imputed rent fee was 0.362, and Gini coefficient of total housing cost was 0.291. Third, the variables related to their housing maintenance cost were family type, total household expenditure of socio-demographic characteristics and residence, type of rent, housing type of housing environmental factor. Also, the variables contributing to imputed rent fee were job type and educational attainment of household hearts, the number of family members, total household expenditure, residence, type of rent, housing type and tole number of rooms. In addition, the variables associated with total housing cost were job type and educational attainment of household head, total household income and residence, type of rent, housing type and the number of room. Finally, age, job type, educational attainment of household head, wife's employment status, the number of family members, family type, total household expenditure, residence, rent type of rent, housing type, the size of living space, and the number of room were significant variables contributing to total household cost to total household income ratio.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.386-391
• /
• 2006

Though a variety of demands for an green dwelling, it is hard to diffuse a wooden house due to high construction cost. So this study aims to diffuse to propose a space modular for production and supply. Therefore the result of investigation to the space modular of each room through the survey of width and depth in the type of dwelling in korea is as follows. 1) Investigated the mixture of magnitude on the total width and depth, the survey is showed commonly 3.6m and 4.2m. 2) Once the depth is 3.6m, a living room and inner room, room's width is 3.9m, 4.5m. Once the depth is 4.2m, those width is 4.8m. 3) By use of a survey, the post distances consisted of all rooms are 3.6m, 3.9m, 4.2m, 4.5m, 4.8m. The result of investigation to possibility for mixture applied to six level types invested post modules to the wooden house of post & Beam method is as follows. 1) With the regularity of depth and simplicity of width, It is potential to compound floor plan in korea. 2) It is possible to plan an informal shape of kitchen+dining room which is a spare space available for the merit changeable space after arranged main rooms. 3) It is possible to plan a space through a variety of mixture method at bathroom. Thus, it is possible for a variety of floor formations to build a low-cost wooden house through five types of post distance.

• 한국항공우주학회지
• /
• 제38권6호
• /
• pp.620-628
• /
• 2010

소형위성은 저비용으로 단기간에 개발이 가능하기 때문에 이를 통해 폭 넓은 우주 연구를 수행할 수 있고 다양한 분야의 활용 가능하다. 소형위성은 빠른 개발이 가능한 이점이 있다. 따라서 신속 대응 우주 구현이 주목됨에 따라 소형위성의 역할이 급속히 증가하고 있다. 하지만 소형위성은 기존의 위성에 비해 크기나 전력의 제약이 많기 때문에 고성능의 안정적인 시스템을 기대하기는 어렵다. 이러한 문제점을 해결하고 빠른 개발을 위해 표준화와 모듈화 설계가 필요하다. 모듈화는 플러그 앤 플레이(Plug-and-Play)를 지원하여 수일 내에 인공위성 제작 및 시험을 가능하게 한다. 이러한 모듈 간의 원활한 데이터 통신을 위해서는 데이터 버스의 표준이 요구된다. CAN 통신 방식은 플러그 앤 플레이에 가장 효과적으로 대처 할 수 있는 통신방식으로 꼽힌다. CAN은 높은 신뢰성을 가지며 분산 시스템을 지원하여 위성의 호환성을 높여준다. 따라서 시험이 용이해지고 짧은 기간에 고성능의 안정적인 위성 개발이 가능하게 된다. 본 논문에서는 모듈화 방식의 소형위성 개발 방안에 대해 제안하고, CAN을 데이터 버스로 적용하여 소형위성 내부 데이터 인터페이스 버스를 설계하고 시험을 통해 적합성을 분석하여 기술하였다.

• 한국정보과학회논문지:시스템및이론
• /
• 제34권11호
• /
• pp.572-580
• /
• 2007

무선 센서 네트워크는 자연 환경의 정보를 수집하고, 수집한 정보를 가공하고, 가공된 정보를 무선 통신을 통하여 사용자에게 실시간으로 전달하는 기능을 가진 설비이다. 이러한 센서 네트워크는 다수의 무선 센서 노드들로 이루어지고, 이 센서 노드들은 비용 효율성의 이유로 매우 제한적인 하드웨어 칩들로 구성된다. 예를 들어, UC Berkeley에서 설계한 MICA센서 노드에는 8-bit CPU, 4KB RAM, 그리고, 128KB FLASH 등으로 구성된다. 따라서 이것들을 동작시키는 센서 운영체제는 이러한 하드웨어 제약성을 감내할 수 있어야 한다. 본 논문에서는 멀티 쓰레디드 센서 운영체제를 위한 공간 효율적인 쓰레드 스택 관리 기법을 제안한다. 제안한 기법은 컴파일 시점에 각 쓰레드 함수의 스택 사용량 정보를 측정한다. 측정된 결과를 바탕으로, 함수 호출 시와 같은 스택 영역의 요구가 발생할 경우에 스택의 할당 및 반환 작업을 수행하여 쓰레드 스택 영역을 동적으로 관리한다. 본 기법은 나노 Qplus 센서 운영체제에서 구현되었다. 본 논문의 성능 실험을 통하여, 제안한 기법을 사용하는 것이 기존의 정적인 스택 관리 방법을 사용하는 것 보다 스택 메모리 공간을 보다 효율적으로 관리할 수 있음을 확인한다.

• 한국디지털건축인테리어학회논문집
• /
• 제10권3호
• /
• pp.19-28
• /
• 2010

The construction projects are recently having changes in their magnitude and complexity. Therefore, the amount of information created and managed by participants over project phases is enormous and this may cause difficulties in consistent and integrated data management. Because of the change in construction projects, there is a need to apply more logical and systematic ways to deal integrated data management. For the solution to this, BIM(Building Information Modeling), a new paradigm for integrated management of the information over project life-cycle, has been seriously considered. Also, the Korean Public Procurement Service announced that project over 50 billion Korean Won should introduce BIM into procurement starting from 2012. However, the studies and development have lack on studies of applying BIM and managing the data made using BIM in pre-design and maintenance stage. In pre-design stage, the concept of schematic design model is made to support for making major decisions concerning the size, shape and cost of the project. To decide the cost for the building in this stage by making use of BIM, estimating the amount of building materials used for constructing should be preceded. In this study, the pre-design BIM is explained to gain a better understanding of its process, since this paper focused on space programming stage. Finally, the paper suggests the concept process of estimating the amount of materials in building interior finishing from selecting the type for the elements of each space made to support the client for making decisions in space programming stage based on pre-design BIM.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제24권2호
• /
• pp.15-25
• /
• 2018

Purpose: The important things in space plan of a screening center are improving the spatial awareness by space systemization and minimizing the examination time for customers, and reducing the required time of screening work and maximizing the capacity for the screening center. Therefore, we tried to solve the problem of improving spatial awareness and reducing the examination time by using the pedestrian based discrete event simulation at the minimum cost. Methods: We have analyzed the drawbacks and the supplement points by comparing the floor plan at the time of opening and the current floor plan. Based on the analysis, we propose an improved plan which changes the location of the examination rooms and the number of services, and we also verify the improved plan based on simulation analyses. Results: 1) Through the analyses, we derived the drawbacks of the floor plan at the time of opening, and we realized that the current floor plan reflects the drawbacks. 2) The major reasons of the long examination time are the human traffic jam and the occurrence of queues due to unreasonable allocation of services. 3) Through the discrete event simulation analyses, it was possible to specify the place of the queues manually so as to use the given space fairly. 4) Using the discrete event simulation, it was possible to reduce the examination time and to improve the spatial awareness effectively at the minimum cost. Implications: Although the proposed simulation methodology in this paper is an analysis of the existing screening center, we expect that the proposed methodology will be used to develop a more efficient architectural design process by pre-applying the method to the course of designing a screening center and finding the suitability of the proposed method with the matched number of services.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권11호
• /
• pp.3544-3564
• /
• 2022

With the development of the NB-IoT (Narrow band Internet of Things) and smart cities, coupled with the emergence of smart smoke sensors, new requirements and issues have been introduced to study on the deployment of sensors in large spaces. Previous research mainly focuses on the optimization of wireless sensors in some monitoring environments, including three-dimensional terrain or underwater space. There are relatively few studies on the optimization deployment problem of smart smoke sensors, and leaving large spaces with obstacles such as libraries out of consideration. This paper mainly studies the deployment issue of smart smoke sensors in large spaces by considering the fire probability of fire areas and the obstacles in a monitoring area. To cope with the problems of coverage blind areas and coverage redundancy when sensors are deployed randomly in large spaces, we proposed an optimized deployment strategy of smart smoke sensors based on the PSO (Particle Swarm Optimization) algorithm. The deployment problem is transformed into a multi-objective optimization problem with many constraints of fire probability and barriers, while minimizing the deployment cost and maximizing the coverage accuracy. In this regard, we describe the structure model in large space and a coverage model firstly, then a mathematical model containing two objective functions is established. Finally, a deployment strategy based on PSO algorithm is designed, and the performance of the deployment strategy is verified by a number of simulation experiments. The obtained experimental and numerical results demonstrates that our proposed strategy can obtain better performance than uniform deployment strategies in terms of all the objectives concerned, further demonstrates the effectiveness of our strategy. Additionally, the strategy we proposed also provides theoretical guidance and a practical basis for fire emergency management and other departments to better deploy smart smoke sensors in a large space.