• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.3
• /
• pp.228-236
• /
• 2016

Extraordinarily the establishment of towing tank has been initiated after the allocation of space at the basement floor of existing building through remodeling procedure. Therefore the asymmetric tank should be unavoidably determined by compromising with the allowable space and existing building structure. Consequently the shape of towing carriage ought to be selected as a cantilever type to match with the given environmental conditions. Finally the major role of the towing tank has been configured on the fundamental research work for the high speed marine vehicles. Due to the limited length of towing tank, it is appeared that the carriage should accelerated with 1.2m/sec² which is equivalent to twice of the maximum acceleration in ordinary practices on design application of carriage. In such a condition the exerted total power of motor could not be converted to traction force of the carriage without slip for the acceleration. To overcome these difficulties the contact pressure of a horizontal traction wheel to rail has been reinforced by the elastic recovery force of springs on supporting rollers. It is believed that the design experience of the high speed towing carriage under unusual circumferential condition and acceleration barrier could be utilized not only on the design of high speed towing carriage but also on the improvement of existing facilities.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.137-148
• /
• 2012

In this paper, we proposed the location-aware coordinate routing algorithm for improving the performance of routing algorithm by using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. The x, y and z coordinate axes from divided address space of 16 bit to solve this problems. However, coordinate routing does not take account of wireless link condition. If wiress link condition is not considered, when the routing table is updated, the nodes with bad link conditions are updated in the routing table and can be chosen as the next hop. This brings out the retransmissions because of received packet's errors. Also, because of these retransmissions, additional power is consumed. In this paper, we propose the location-aware coordinate routing algorithm considering wiress link condition, where reliable data transmission is made and the consumed enegy is minimize. and we compared and connected region and transition region of ZigBee location based routing in the aspect of average number of multi hops, subordinate packet delivery ratio, delay time, and energy consumption of proposed algorithm. It turned out that there were improvements in performances of each items.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2579-2585
• /
• 2010

This paper proposes a dynamic human pose tracking method using motion-based search strategy from an image sequence obtained from a monocular camera. The proposed method compares the image features between 3D human model projections and real input images. The method repeats the process until predefined criteria and then estimates 3D human pose that generates the best match. When searching for the best matching configuration with respect to the input image, the search region is determined from the estimated 2D image motion and then search is performed randomly for the body configuration conducted within that search region. As the 2D image motion is highly constrained, this significantly reduces the dimensionality of the feasible space. This strategy have two advantages: the motion estimation leads to an efficient allocation of the search space, and the pose estimation method is adaptive to various kinds of motion.

• Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.31-40
• /
• 2022

Background: Plant vegetation appears in heterogeneous and patchy forms in arid and semi-arid regions. In these regions, underneath the plant patches and the empty spaces between them are covered by biological soil crusts (moss, lichen, cyanobacteria, and fungi). Biological soil crusts lead to the formation and development of fertile islands in between vegetation patches via nitrogen and carbon fixation and the permeation of runoff water and nutrients in the soil. Results: The present study has investigated the association of biological soil crusts, the development of fertile islands, and the formation of plant patches in part of the Takht-e Soltan protected area, located in Khorasan Razavi Province, Iran. Three sites were randomly selected as the working units and differentiated based on their geomorphological characteristics to the alluvial fan, hillslope, and fluvial terrace landforms. Two-step systematic random sampling was conducted along a 100-meter transect using a 5 m² plot at a 0-5 cm depth in three repetitions. Fifteen samplings were carried out at each site with a total of 45 samples taken. The results showed that the difference in altitude has a significant relationship with species diversity and decreases with decreasing altitude. Results have revealed that the moisture content of the site, with biocrust has had a considerable increase compared to the other sites, helping to form vegetation patterns and fertile islands. Conclusions: The findings indicated that biological crusts had impacted the allocation of soil parameters. They affect the formation of plant patches by increasing the soil's organic carbon, nitrogen, moisture and nutrient content provide a suitable space for plant growth by increasing the soil fertility in the inter-patch space.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.5
• /
• pp.1-10
• /
• 2016

Magnetic disks have been used for decades in auxiliary storage devices of computer systems. In recent years, the use of NAND flash memory, which is called SSD, is increased as auxiliary storage devices. However, NAND flash memory, unlike traditional magnetic disks, necessarily performs the erase operation before the write operation in order to overwrite data and this leads to degrade the system lifetime and performance of overall NAND flash memory system. Moreover, NAND flash memory has the lower endurance, compared to traditional magnetic disks. To overcome this problem, this paper proposes EPET (Enhanced Prediction and Elapsed Time) wear leveling technique, which is especially efficient to portable devices. EPET wear leveling uses the advantage of PET (Prediction of Elapsed Time) wear leveling and solves long-term system failure time problem. Moreover, EPET wear leveling further improves space efficiency. In our experiments, EPET wear leveling prolonged the first bad time up to 328.9% and prolonged the system lifetime up to 305.9%, compared to other techniques.

• Journal of Korean Society for Quality Management
• /
• v.18 no.2
• /
• pp.18-24
• /
• 1990

The location of inspection stations is a significant component of production systems. In this paper, a prototype expert system is designed for deciding the optimal location of inspection stations. The production system is defined as a single channel of n serial operation stations. The potential inspection station can be located after any of the operation stations. Nonconforming units are generated from a compound binomial distribution with known parameters at any given operation station. Traditionally Dynamic programming, Zero-one integer programming, or Non-linear programming techniques are used to solve this problem. However a problem with these techniques is that the computation time becomes prohibitively large when t be number of potential inspection stations are fifteen or more. An expert system has the potential to solve this problem using a rule-based system to determine the near optimal location of inspection stations. This prototype expert system is divided into a static database, a dynamic database and a knowledge base. Based on defined production systems, the sophisticated rules are generated by the simulator as a part of the knowledge base. A generate-and-test inference mechanism is utilized to search the solution space by applying appropriate symbolic and quantitative rules based on input data. The goal of the system is to determine the location of inspection stations while minimizing total cost.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.19 no.1
• /
• pp.61-80
• /
• 1991

The purpose of this study is to present the design method to embody the cultural heritage and to reproduce the image of Korean Traditional Garden these days. For this purpose, to begin with, the major elements which can be applied to the planning and design were extracted by to study on the prototype of Korean Traditional Garden, and the process and the outcome for reconstruction of traditional garden were presented by design proposal for the Korean Garden in the exhibition space of EXPO '90, the International Garden and Greenary Exposition, Osaka, Japan, 1990. The study on the prototype of Korean Garden is focused on the spatial organization, the facilities allocation, and the gardening technic of traditional garden, and the major contents of the case study are as follow ; (1) To investigate the constraints and the opportunities of site development by the analysis and the synthesis of the site condition for the case study, (2) To study on the planning technic which can be applied to the site, (3) To establish the planning models which can be introduced into the site and to choose the final model by the comparison and valuation of them, (4) To set up the Master Plan on the basis of the final model. In spite of the fact that the method and the contents have a lot of problems, the significance of this study is to present a possibility to reproduce the Korean Traditional Garden these days, moreover to grope for the opportunities to propagate it internationally.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.4
• /
• pp.37-43
• /
• 2011

Lunar exploration program has been prepared with the aim of launch in the 2020's. As part of it, a lunar lander demonstrator has been developed which is the model for verifying all the system, such as structure, propulsion and control system before launch to deep space. After verifying all the system, the demonstrator will be evaluated by flight test. This paper deals with path tracking controller based on thrusters for the demonstrator. For this, first we derive equations of motion according to the allocation of thrusters and design the path tracking controller. The signal generated from the controller is continuous so PWPF(Pulse-Width Pulse-Frequency) modulator is adopted for generating on/off signal. Finally MATLAB simulation is performed for evaluating the path tracking ability and the final landing velocity.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.3
• /
• pp.120-132
• /
• 2008

Networks-on-Chip (NoC) is emerging as a practical development platform for future systems-on-chip products. We propose an energy-efficient static algorithm which optimizes the energy consumption of task communications in NoCs with voltage scalable links. In order to find optimal link speeds, the proposed algorithm (based on a genetic formulation) globally explores the design space of NoC-based systems, including network topology, task assignment, tile mapping, routing path allocation, task scheduling and link speed assignment. Experimental results show that the proposed design technique can reduce energy consumption by 28% on average compared with existing techniques.

• The Journal of the Korea Contents Association
• /
• v.1 no.1
• /
• pp.130-136
• /
• 2001

Real-time applications like VoIP in mobile networks need smooth handovers in order to minimize or eliminate packet loss as a mobile host(MH) transitions between network links. In this paper, we design a new variable buffering mechanism for IPv6 by which an MH can request that the router on its current subnet buffers pad(eta on its behalf while the MH completes registration procedures with the router of a new subnet. Performance results show that our proposed queueing scheme with a variable space allocation is quite appropriate for mobile internet environment in terms of the packet loss rate.