• Journal of Korean Society on Water Environment
• /
• v.31 no.2
• /
• pp.159-165
• /
• 2015

The organic matter sources of phytoplankton and related environmental factors influencing algal bloom in Paldang reservoir were studied using nitrogen and carbon isotope ratio(${\delta}^{15}N$, ${\delta}^{13}C$). Phytoplankton samples for stable isotope analysis were collected from four points in reservoir using a plankton net. Physicochemical water quality, algal taxa and hydrological data were collected from published monitoring material. Phytoplankton samples were analyzed by IRMS. CN ratio of each sample was very similar to that of phytoplankton from literature cited. ${\delta}^{15}N$ of each sample was decreased during July. Mixing and dilution of nitrogen sources due to increment of influx by concentrated rainfall were considered as the main reason for the decline of ${\delta}^{15}N$. Based on analyzed ${\delta}^{15}N$ value of each sample, nitrogen source of Bughan river sample was presumed to come from soil. The nitrogen sources of Namhan river and Kyeongan stream samples seemed to be sewage or animal waste. Low ${\delta}^{15}N$ value in August (2012) seemed to be influenced by isotope fractionation due to the blooming of nitrogen-fixation blue-green algae (Anabaena spp.). Variation in ${\delta}^{15}N$ values particularly by blue-green algal bloom was considered the important factor for estimating the organic matter sources of phytoplankton.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.6
• /
• pp.8-17
• /
• 2013

The contamination of chlorinated ethenes at an industrial complex, Wonju, Korea, was examined based on sixteen rounds of groundwater quality data collected from 2009 to 2013. Remediation technologies such as soil vapor extraction, soil flushing, biostimulation, and pumping-and-treatment have been applied to eliminate the contaminant sources of trichloroethylene (TCE) and to prevent the migration of TCE plume from remediation target zones. At each remediation target zone, temporal monitoring data before and after the application of remediation techniques showed that the aqueous concentrations of TCE plume present at and around the main source areas decreased significantly as a result of remediation technologies. However, the TCE concentration of the plumes at the downstream area remained unchanged in response to the remediation action, but it showed a great fluctuation according to seasonal recharge variation during the monitoring period. Therefore, variations in the contaminant flux across three transects were analyzed. Prior to the remediation action, the concentration and mass discharges of TCE at the transects were affected by seasonal recharge variation and residual DNAPLs sources. After the remediation, the effect of remediation took place clearly at the transects. By tracing a time-series of plume evolution, a greater variation in the TCE concentrations was detected at the plumes near the source zones compared to the relatively stable plumes in the downstream. The difference in the temporal profiles of TCE concentrations between the plumes in the source zone and those in the downstream could have resulted from remedial actions taken at the source zones. This study demonstrates that long term monitoring data are useful in assessing the effectiveness of remediation practices.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.476-481
• /
• 1997

Optimum operating conditions of the 0.98 $\mu\textrm{m}$-pumped broadband erbium-doped fiber sources, where the mean wavelength variation is minimized, have been experimentally investigated. The optimum conditions for the mean wavelength stabilization were found to be different between the case of the isolated source and the case of the presence of feedback. In case of feedback, the proper pump power that yields zero slope of mean wavelength variation was found to be lower than that of the isolated case, and the mean wavelength was found nearly unchanged over the wide range of pump power. Howerer, the feedback resulted in lower output power and the mean wavelength was found to be sensitive to the variation of feedback level. In the respect of mean wavelength stability, the better performance could be obtained with some feedback, provided that the feedback level is kept constant. Thus we could also enhance the mean wavelength stability by allowing appropriate constant feedback into the source.

• Journal of Mechanical Science and Technology
• /
• v.18 no.6
• /
• pp.1019-1025
• /
• 2004

Pressure variation is one of the major sources on noise emission in the axial type oil piston pumps. Therefore, it is necessary that the pressure variation characteristics of the oil hydraulic piston pumps be clarified to reduce the pump noise. Pressure variations in a cylinder at the discharge region and the pump noise were simultaneously measured with discharge pressures and rotational speeds during the pump working. To investigate the effects of the pre-compression and the V-notch in the valve plate, we used the three types of valve plates. In this research, it is clear that the pressure variation characteristics of axial type oil piston pumps is deeply related to the pre-compression and to the V-notch design in valve plate. Therefore, we could reduce the pump noise by using the appropriate pre-compression angle and the notch design that are between the suction port and the discharge port in valve plate.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.12
• /
• pp.921-928
• /
• 2002

Main sources of the nitration of a gear-pair system are backlash and transmission error, the difference between required and actual rotation during gear meshing. This paper presents the nonlinear dynamic characteristics of gear motions due to the existence of backlash and periodic variation of meshing stiffness, which is assumed as a one-term harmonic component. Gear motions are classified as three types with the consideration of backlash. Each response is calculated using the harmonic balance method and confirmed by numerical integration. The responses with the increase of the rotating speed show abrupt changes in its magnitude for the variation of the preload, exciting force, and damping coefficient. The result also shows that there is a chaotic motion with some specific design parameters and operating conditions In gear diving system. Consequently the design of gear driving system with low nitration and noise requires the study on the effects of nonlinear dynamic characteristics due to stiffness variation and backlash.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.5
• /
• pp.338-345
• /
• 2002

The study presents a new testing and analysis method for brake judder on vehicle. For the identification of the excitation mechanism of a brake judder, it is necessary to measure the dynamic brake disc geometry during braking on vehicle. The non-contact sensor system was used to monitor the brake disc geometry. Brake torque variation (BTV) caused by disc thickness variation (DTV) is the primary excitation for brake judder. The mechanical effects generating BTV are linked not only to initial manufacturing tolerances but also to uneven wear. Therefore, the brake disc geometry should be strictly managed to initial condition. The aim of this study has been to measure the dynamic DTV and runout on vehicle and analyze the influence of test parameters on brake judder and compare the disc component with vehicle matching about the DTV Profile. As a result of this study, The amplitude of brake judder is proportional to vehicle speed and fluid pressure fluctuation on braking. The major sources of brake judder are directly related to disc thickness variation and side runout variation of corner assembly (disc, hub. bearing).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.87-90
• /
• 2006

The Earth's spherical harmonic model of the main field and of the secular variation, of the geomagnetic field gives the intensity and geomagnetic structure at any location around the earth, assuming an undistorted, steady state field that no external sources or localized earth anamalies. To consider the practical use of a ship's digital compass in earth's magnetic field, Earth's spherical harmonic model is searched for the related practical methods and procedures as a basic study in this work.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.979-985
• /
• 2001

Two experiments on commercial broiler chickens (3-37 d) and WL layers (252-364 d) were conducted to study the relative bioavailability of phosphorus (P) from different P supplements in comparison to tricalcium phosphate (TCP), at constant dietary calcium (Ca):P ratio. The P sources tested were dicalcium phosphate (DCP), steam sterilized bone meal (SSBM), commercial mineral mixture (CMM), phosphoric acid (PA) and a combination of CMM + PA. Fluorine (F) content in CMM and SSBM was 13.12 and 0.14 g/kg, respectively. In commercial broiler diets, DCP, SSBM or PA could be used as supplemental P sources without affecting (p<0.05) weight gain, feed intake, tibia ash and, P and Ca contents in tibia ash when compared to TCP. Severity of leg abnormality and deposition of F in bone were higher (p<0.05) in group fed CMM. P retention and serum inorganic P content was significantly reduced (p<0.05) in CMM fed birds compared to those fed TCP, SSBM, PA or CMM+PA. Among other P sources (TCP, SSBM, PA and CMM+PA) the serum inorganic P levels did not vary significantly (p<0.05). The P retention also significantly reduced in CMM fed groups compared to those fed DCP or PA. The P retention significantly increased from 0.183 to 0.216 units by supplementation of PA to CMM diet. In layers, egg production was not affected by replacing TCP with DCP, SSBM, PA or CMM+PA, but significantly (p<0.05) reduced with CMM. Feed (kg)/kg egg mass, egg weight, shell quality (shell weight and shell thickness) and serum Ca levels were not influenced by dietary variation in P source. The poor performance of both broilers and layers fed on CMM based diets could be attributed to the presence of hlgher levels of F (647.8 and 630.1 mg/kg, respectively) and low P utilization. Based on growth, bone mineralization and P retention it is concluded that DCP, SSBM or PA can be used as alternatives to TCP in broiler diets. In WL layer diets, in addition to above P sources, CMM can also be used as supplemental P source by replacing one half of P from CMM with PA without affecting egg production and shell quality.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.460-465
• /
• 2003

Characteristics of 0.98 $\mu$m-pumped erbium-doped fiber (EDF) sources with double-pass forward (DPF) configuration are analyzed by numerical calculation. Various source characteristics such as output power, spectral width and mean-wavelength stability are investigated with the variation of EDF length, pump power and pump wavelength. Some of the numerical results are compared with experimental ones for verification. The results show that the characteristics of sources with DPF configuration can change considerably with the EDF length. It is also found that an optimum design can exist for stable mean-wavelength against fluctuations of pump power and pump wavelength.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.1-7
• /
• 2007

Torque fluctuation of an engine and angular velocity variation of a propeller shaft are the main excitation sources in a vehicle driveline. This paper presents the mechanism of these excitation sources. An equivalent model of the engine system and propeller shaft system is constructed to simulate the excitation phenomena. The analytical model contains the geometrical and dynamic mechanism. Combustion pressure of the cylinder is measured from dynamometer. The computer simulation is carried out by commercial program package. Results of the simulations show the characteristics of the torsional excitation source of the driveline.