Browse > Article

Relation between Pressure Variations and Noise in Axial Type Oil Piston Pumps  

Kim, Jong-Ki (Korea Institute of Machinery ＆ Materials)
Kim, Hyoung-Eui (Korea Institute of Machinery ＆ Material)
Jung, Jae-Youn (Faculty of Mechanical ＆ Aerospace System Engineering, Chonbuk National University)
Oh, Seok-Hyung (Faculty of mechanical Engineering, Kunsan National University)
Jung, Seok-Hoon (Department of Automobile, Byuksung College)
Publication Information
Journal of Mechanical Science and Technology / v.18, no.6, 2004 , pp. 1019-1025 More about this Journal
Abstract
Pressure variation is one of the major sources on noise emission in the axial type oil piston pumps. Therefore, it is necessary that the pressure variation characteristics of the oil hydraulic piston pumps be clarified to reduce the pump noise. Pressure variations in a cylinder at the discharge region and the pump noise were simultaneously measured with discharge pressures and rotational speeds during the pump working. To investigate the effects of the pre-compression and the V-notch in the valve plate, we used the three types of valve plates. In this research, it is clear that the pressure variation characteristics of axial type oil piston pumps is deeply related to the pre-compression and to the V-notch design in valve plate. Therefore, we could reduce the pump noise by using the appropriate pre-compression angle and the notch design that are between the suction port and the discharge port in valve plate.
Keywords
Pressure Variation; Noise; Piston Pump; Valve Plate;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Helgestad, B. O., Foser, K. and Bannister, F. K., 1974, 'Pressure Transients in an Axial Piston Hydraulic Pump,' Proc. Inst. of Mech. Engrs., Vol. 188, No. 17, pp. 198-199
2 Jung, J. Y. and Kim, J. K., 2003, 'Driving Mechanism of Tapered Pistons in Bent-Axis Design Axial Piston Pumps,' KSME International Journal, Vol. 17, No. 2, pp. 181-186   과학기술학회마을
3 Edge, K. A. and Darling, J., 1986, 'Cylinder Pressure Transients in Oil Hydraulic Pumps with Sliding Plate Valves,' Proc. Inst. of Mech. Engrs., Vol. 200, pp. 45-54
4 Hiroshi KOSODO et al., 1998, 'Experimental Research on Pressure-Flow Characteristics of the V-notch,' Fluid power system, Vol. 29, No. 1, pp. 16-22
5 Jung, J. Y. and Kim, J. K., 2003, 'Measurement of Fluid Film Thickness on the Valve Plate in Oil Hydraulic Axial Piston Pumps (Part 1 : bearing pad effects),' KSME International Journal, Vol. 17, No. 2, pp. 246-253   과학기술학회마을
6 Lin, S. J., Akers, A. and Zeiger, G., 1985, 'The Effect of Oil Entrapment in an Axial Piston Pump,' Transactions of the ASME, Vol. 107, pp. 246-251