• 대한토목학회논문집
• /
• 제28권2C호
• /
• pp.95-103
• /
• 2008

탄성파 피에조콘 관입시험(Seismic piezocone penetration test, SCPTu)은 콘 관입 저항값과 간극수압 거동 특성 외에도 지반의 동적 특성을 측정할 수 있는 시험법이지만, 해상 조사의 경우 탄성파를 일으키는 발진(Source) 장치를 설치하기가 상당히 힘들기 때문에 SCPTu를 이용하여 해양 지반에 대한 동적 물성치를 파악하는데 어려움이 있다. 따라서 해양 지반의 동적 물성치 파악을 위하여 벤더 엘리먼트를 이용한 인홀형 탄성파 탐사콘(Inhole type CPTu)을 개발하였는데, 이는 콘 롯드(rod) 내부에 발진기(Source)와 수진기(Receiver)를 내재하고 있기 때문에 외부의 부가적인 발진기가 필요 없어 육상 뿐만 아니라 해상에서도 충분히 활용할 수 있다. 이번 연구에서는 인홀형 탄성파콘의 적용성을 분석하기 위해 카올리나이트를 활용한 실내 모형 토조실험을 수행하였는데, 카올리나이트 지반의 전단파 속도를 시간에 따라 측정하였고, 또한 발진부와 수진부 사이의 거리를 다양하게 바꿔가면서 발진기와 수진기가 설치될 때 발생하는 지반 교란의 영향을 검토하였다.

• 한국유체기계학회 논문집
• /
• 제15권2호
• /
• pp.20-29
• /
• 2012

The green house on the waterfront is air-conditioned by a water-source heat pump system with riverbank filtration water. In order to supply riverbank filtration water in alluvium aquifer, the riverbank filtration facility for water intake and recharge, two pumping wells and one recharge well, has been constructed. The research site in Jinju, Korea was chosen as a good site for riverbank filtration water supply by the surface geological survey, electrical resistivity soundings, and borehole surveys. In the results of two boreholes drilling at the site, it was revealed that the groundwater table is about 3 m under the ground, and that the sandy gravel aquifer layer in the thickness of 6.5 m and 3.5 m occurs at 5 m and 7 m in depth below the ground level respectively. To prevent the recharge water from affecting the pumped water which might be used as heat source or sink, the distance between pumping and recharge wells is designed at least 70 m with a quarter of recharged flow rate. It is predicted that the transfer term, the recharge water affects the pumping well, is over 6 months of heating season. Hydrogeological simulation and underground water temperature measurement have been carried out for the pumping and recharge well positions in order to confirm the capability of sustainable green house heating and cooling.

• Earthquakes and Structures
• /
• 제8권6호
• /
• pp.1363-1386
• /
• 2015

The October 23 2011 Van Earthquake is studied from an earthquake engineering point of view. Strong ground motion processing was performed to investigate features of the earthquake source, forward directivity effects during the rupture process as well as local site effects. Strong motion characteristics were investigated in terms of peak ground motion and spectral acceleration values. Directiviy effects were discussed in detail via elastic response spectra and wide band spectograms to see the high frequency energy distributions. Source parameters and slip distribution results of the earthquake which had been proposed by different researchers were summarized. Influence of the source parameters on structural response were shown by comparing elastic response spectra of Muradiye synthetic records which were performed by broadband strong motion simulations of the earthquake. It has been emphasized that characteristics of the earthquake rupture dynamics and their effects on structural design might be investigated from a multidisciplinary point of view. Seismotectonic calculations (e.g., slip pattern, rupture velocity) may be extended relating different engineering parameters (e.g., interstorey drifts, spectral accelerations) across different disciplines while using code based seismic design approaches. Current state of the art building codes still far from fully reflecting earthquake source related parameters into design rules. Some of those deficiencies and recent efforts to overcome these problems were also mentioned. Next generation ground motion prediction equations (GMPEs) may be incorporated with certain site categories for site effects. Likewise in the 2011 Van Earthquake, Reverse/Oblique earthquakes indicate that GMPEs need to be feasible to a wider range of magnitudes and distances in engineering practice. Due to the reverse faulting with large slip and dip angles, vertical displacements along with directivity and fault normal effects might significantly affect the engineering structures. Main reason of excessive damage in the town of Erciş can be attributed to these factors. Such effects should be considered in advance through the establishment of vertical design spectra and effects might be incorporated in the available GMPEs.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1002-1006
• /
• 2000

It is diffuse sound field that measuring condition of absorption ratio and sound transmission loss for material consist of building are measured in reverberartion room and on-site. In this study, for upkeeping diffuse sound field in reverberation room, it is measured and etimated that sound field is effected according to sound source lacation and characteristics of emission directivity for sound source.

• KIEAE Journal
• /
• 제13권2호
• /
• pp.157-162
• /
• 2013

To deal with the water pollution arising from the construction site, this study raises the issues of management and laws and it suggest the efficient way to reduce water pollution by through the case studies. In order to study, seven cases were selected from "Construction Environmental Management Best Practice Competition" co - sponsored by Construction Association of Korea and Construction Environment Association. As a study result, there are problems that depending on the characteristic of the construction site environment simple alone settling facilities can not handle muddy and dirty water generated by the construction site. However, when the construction site applied improved water pollution control facilities with reflecting the characteristic of muddy and dirty water. The problem can be solved moreover it can achieve exceeded emission standard. Therefore new regulations and management with water pollution control facilities considering characteristic of environment is needed to cope with water pollution arising from the construction site.

• 한국지진공학회논문집
• /
• 제24권1호
• /
• pp.9-17
• /
• 2020

The stochastic point-source model has been widely used in generating artificial ground motions, which can be used to develop a ground motion prediction equation and to evaluate the seismic risk of structures. This model mainly consists of three different functions representing source, path, and site effects. The path effect is used to emulate decay in ground motion in accordance with distance from the source. In the stochastic point-source model, the path attenuation effect is taken into account by using the geometrical attenuation effect and the inelastic attenuation effect. The aim of this study is to develop accurate equations of ground motion attenuation in the Korean peninsula. In this study, attenuation was estimated and validated by using a stochastic point source model and observed ground motion recordings for the Korean peninsula.

• 상하수도학회지
• /
• 제11권4호
• /
• pp.91-98
• /
• 1997

At present, automated monitoring of water quality in Han river has been operated at each water treatment plant. But the automated measurement sites must be choosen newly because water source in Seoul move to the upper stream of Chamshil weir. In this study, automated monitoring sites in Han river were reviewed, and the proper sites for automated monitoring of water quality have been selected by Qual2E model, RMA model, water sampling guidline, Sanders' method and topograpical characteristics of Han river in order to resonable operate. 8 sites have been selected as follows: (1) the site of immediately after Paldang drainage (2) the left site and a right site of $Gu{\check{u}}i$ water intake (3) the left site and a right site at Noryangjin(Han river bridge) (4) the site between Shingok weir and Anyangchun confluence point(Hangju bridge) (5) the site of Chungryangchun downstream(existence) (6) the site of Tanchun downstream(existence) (7) the site of Anyangchun downstream(existence) (8) the site of Wangsukchun downstream. The results proposed resonable operating management of network and economical system built up.

• 한국지반환경공학회 논문집
• /
• 제10권7호
• /
• pp.135-141
• /
• 2009

지진원 및 구조물과 지반상호간의 동적 특성을 보다 신뢰성 있게 도출하기 위해 지반의 증폭특성은 반드시 고려되어야하는 요소이다. 지반증폭 특성을 분석할 때 여러 가지 방법이 제시되어 있으나 본 연구에서는 Nakamura(1989)에 의해 제시된 방법을 적용하였다. 본 방법은 얕은 지반의 상시미동의 표면파 특성을 이해하기 위해 제시되어 한계점이 존재하나 근래에 와서 S파 등에 적용되어 지반의 동적인 증폭 특성연구에 많이 이용되고 있다. 일반적으로 S파가 이용되고 있으나 본 연구에서는 지진파 에너지인 Coda 파에 새로이 적용하였다. 최근 국내에 설치된 지진 관측기에 관측된 5개 지진(규모 3.6-5.1)의 약 60 여개의 관측자료를 이용하여 지진관측소 각각 지반의 동적인 증폭 특성을 분석하였다. 관측소마다 저진동수, 고진동수 및 우월주파수가 서로 다른 증폭특성을 보여주었다. 본 연구 결과 관측지반진동에서 지반 고유의 증폭특성을 제거하면 지진원 변수를 보다 신뢰성 있게 도출할 수 있다.

• 한국지반환경공학회 논문집
• /
• 제10권1호
• /
• pp.35-41
• /
• 2009

구조물과 지반상호간의 동적 특성 및 지진원 등을 보다 신뢰성 있게 평가하기 위해 지반의 증폭특성을 반드시 고려하여야 한다. 지반증폭 특성을 분석하는 방법은 여러 가지가 제시되어 있으나 본 연구에서는 Nakamura(1989)에 의해 제시된 방법을 적용하였다. 이 방법은 얕은 지반의 상시미동의 표면파의 특성을 이해하기 위해 제시되어 한계점이 존재하나 근래에 와서 전단파 에너지 등에 적용범위가 넓어지면서 간단한 지반의 동적인 증폭특성 연구에 많이 이용되고 있다. Nakamura(1989)가 제시한 방법을 이용하여 본진 및 11개 후진을 포함한 후쿠오카 지진으로부터 최근 한반도 남부에 설치된 지진관측계에 관측된 지진자료를 이용하여 각각 지진관측소 지반의 동적인 증폭특성을 분석하였다. 결과에 의하면 지진관측소마다 고유주파수, 고주파수 및 저주파수 대역에서 서로 다른 증폭특성을 보여주었다. 특히 각각 관측소 부지의 고유주파수는 각 관측소에서 관측한 지진자료의 질을 좌우하므로 정확한 분석이 필요하다. 또한 본 연구결과를 이용하여 국내 지반의 분류 연구에 많은 정보를 줄 수 있으며 또한 관측 지반진동으로부터 지반고유의 증폭특성을 제거하면 지진원 변수를 보다 신뢰성 있게 도출할 수 있다.

• 한국대기환경학회지
• /
• 제31권6호
• /
• pp.508-519
• /
• 2015

The objective of this study was to quantitatively estimate $PM_{2.5}$ source contribution in Gyeongsan. Ambient $PM_{2.5}$ samples have been collected on zefluor, quartz and nylasorb filter by $PM_{2.5}$ samplers of cyclone method from September 2010 to December 2012. Collected samples were analyzed for determining 17 inorganic elements, 8 ions, and 8 carbon components after pretreatment. Based on these chemical information, the PMF model was applied to estimate the quantitative contribution of air pollution sources. The results of the PMF modeling showed that the sources were apportioned by biomass burning source (15.5%), secondary sulfate source (16.0%), industry source (10.4%), soil source (7.0%), gasoline source (9.1%), incinerator source (10.4%), diesel emission source (11.0%), and secondary nitrate source (20.6%), respectively. To analyze local source impacts from various wind directions, the CPF analysis were performed using source contribution results with the wind direction values measured at the site.