• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.29-39
• /
• 2008

Greedy routing which is easy to apply to geographic wireless sensor networks is frequently used. Greedy routing works well in dense networks whereas in sparse networks it may fail. When greedy routing fails, it needs a recovery algorithm to get out of the communication void. However, additional recovery algorithm causes problems that increase both the amount of packet transmission and energy consumption. Communication void is a condition where all neighbor nodes are further away from the destination than the node currently holding a packet and it therefore cannot forward a packet using greedy forwarding. Therefore we propose a VODUA(Virtually Ordered Distance Upgrade Algorithm) as a novel idea to improve and solve the problem of void. In VODUA, nodes exchange routing graphs that indicate information of connection among the nodes and if there exist a stuck node that cannot forward packets, it is terminated using Distance Cost(DC). In this study, we indicate that packets reach successfully their destination while avoiding void through upgrading of DC. We designed the VODUA algorithm to find valid routes through faster delivery and less energy consumption without requirement for an additional recovery algorithm. Moreover, by using VODUA, a network can be adapted rapidly to node's failure or topological change. This is because the algorithm utilizes information of single hop instead of topological information of entire network. Simulation results show that VODUA can deliver packets from source node to destination with shorter time and less hops than other pre-existing algorithms like GPSR and DUA.

• Journal of KIISE:Information Networking
• /
• v.36 no.4
• /
• pp.286-296
• /
• 2009

A major challenge in next generation optical Internet (NGOI) networks based on dense-wavelength division multiplexing (DWDM) is the provision of guaranteed quality-of-service (QoS) for a wide variety of multimedia applications. One of the critical issues in NGOI is the routing and wavelength assignment problem that is embossed as very important and plays a key role in improving the global efficiency for capacity utilization. But the previous researches had the delay problem, and the path routed by higher priority nodes may be congested and interfere with potential future multicast session requests. To overcome these problems, in this research we suggest a Priority-based Minimum Interference Path Multicast Routing (PMIPMR) algorithm, a new routing algorithm which finds alternative routes based on node priorities and Virtual Source (VS) nodes that has both splitting and wavelength conversion, and then chooses a path that does not interfere with potential future multicast session requests when congestions occur in the network. The PMIPMR algorithm reduces blocking rate significantly and increases the wavelength utilization by avoiding congestion in future multicast session requests.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.27 no.1
• /
• pp.1-6
• /
• 2017

Recent researches on radio frequency energy harvesting networks(RF-EHNs) with limited energy resource like battery have been focusing on the development of a new scheme that can effectively extend the whole lifetime of a network to semipermanent. In order for considerable increase both in the amount of energy obtained from radio frequency energy harvesting and its charging effectiveness, it is very important to design a network that supports energy harvesting and data transfer simultaneously with the full consideration of various characteristics affecting the performance of a RF-EHN. In this paper, we proposes an interference-based charging aware routing protocol(ICARP) that utilizes interference information and charging time to maximize the amount of energy harvesting and to minimize the end-to-end delay from a source to the given destination node. To accomplish the research objectives, this paper gives a design of ICARP adopting new network metrics such as interference information and charging time to minimize end-to-end delay in energy harvesting wireless networks. The proposed method enables a RF-EHN to reduce the number of packet losses and retransmissions significantly for better energy consumption. Finally, simulation results show that the network performance in the aspects of packet transmission rate and end-to-end delay has enhanced with the comparison of existing routing protocols.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2293-2300
• /
• 2008

In ad-hoc sensor network, AODV routing information is disclosed to other nodes because AODV protocol doesn't have any security mechanisms. The problem of AODV is that an attacker can falsify the routing information in RREQ packet. If an attacker broadcasts the falsified packet, other nodes will update routing table based on the falsified one so that the path passing through the attacker itself can be considered as a shortest path. In this paper, we design the routing-information-spoofing attack such as falsifying source sequence number and hop count fields in RREQ packet. And we suggest an efficient scheme for detecting the attackers and isolating those nodes from the network without extra security modules. The proposed scheme doesn't employ cryptographic algorithm and authentication to reduce network overhead. We used NS-2 simulation to evaluate the network performance. And we analyzed the simulation results on three cases such as an existing normal AODV, AODV under the attack and proposed AODV. Simulation results using NS2 show that the AODV using proposed scheme can protect the routing-information-spoofing attack and the total n umber of received packets for destination node is almost same as the existing norm at AODV.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.2
• /
• pp.219-226
• /
• 2013

Against the global eavesdropping in wireless sensor networks, tremendous amount of dummy packets for faking are likely to be continuously generated in order to keep the location privacy of the communication source and destination. In our approach only certain disk-shaped zones of encompassing sources and destination are allowed to issue dummy packets during the data transfer so that the amount of generated packets is reduced while the location privacy of the source and destination remains secret. To this end we design a routing protocol and propose a detailed formal specification of it, and verify major characteristics.

• Journal of Biomedical Engineering Research
• /
• v.26 no.4
• /
• pp.215-221
• /
• 2005

We describe the development of a prototype multi-channel electrical impedance tomography (EIT) system. The EIT system can be equipped with either a single-ended current source or a balanced current source. Each current source can inject current between any chosen pair of electrodes. In order to reduce the data acquisition time, we implemented multiple digital voltmeters simultaneously acquiring and demodulating voltage signals. Each voltmeter measures a differential voltage between a fixed pair of adjacent electrodes. All voltmeters are configured in a radially symmetric architecture to optimize the routing of wires and minimize cross-talks. To maximize the signal-to-noise ratio, we implemented techniques such as digital waveform generation, Howland current pump circuit with a generalized impedance converter, digital phase-sensitive demodulation, tri-axial cables with both grounded and driven shields, and others. The performance of the EIT system was evaluated in terms of common-mode rejection ratio, signal-to-noise ratio, and reciprocity error. Future design of a more innovative EIT system including battery operation, miniaturization, and wireless techniques is suggested.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.462-465
• /
• 2002

This paper presents a basic theory of information flow from single sending point to multiple receiving points, where new theories of algebraic system called "Hybrid Vector Space" and flow vector space play important roles. Based on the theory, a new algorithm for finding maximum homogenous information flow is proposed, where homogenous information flow means the flow of the same contents of information delivered to multiple clients at a time. Effective multi-routing algorithms fur tree-shape delivery rout search are presented.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.403-405
• /
• 2003

Ad Hoc 네트워크에서 Threshold-Tuning을 통한 노드들간의 균형적인 에너지 소모를 위한 알고리즘 (BECT : A Balanced Energy Consumption Algorithm by Threshold-Tuning)을 제안한다. BECT는 노드간 에너지 균형을 맞추어 네트워크의 수명 (Network Lifetime)을 연장한다. 제안한 알고리즘은 DSR (Dynamic Source Routing) 프로토콜을 기반으로 구현하였으며, GloMoSim 2.0을 이용하여 실험을 하였다. 실험 결과 BECT가 실험 토폴로지에 따라 DSR의 에너지 균형을 17-31% 향상시키며, 데이터 전송율이나 제어 패킷 비율에 있어서도 향상된 성능을 보여준다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.1314-1315
• /
• 2008

Recent research work has unearthed that multi-radio multi-channel wireless mesh networks offer considerable capacity gains over single-radio wireless mesh networks. In this paper, we present a new routing metric for multi-radio multi-channel wireless mesh networks. The goal of the metric is to choose multiple link/node disjoint paths between a source and destination node that, when used concomitantly, impart high end-to-end throughput. The proposed metric selects high fidelity paths that will produce elevated throughput with maximum fault tolerance.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.361-364
• /
• 2002

Shortest path problem belongs to the combinatorial optimization problem and plays an important role in the field of computer aided design. It can either be directly applied as in the case of routing or serves as a important subroutine in more complex problems. In this paper, a systolic array for the SSSP(single-source shortest path problem) was derived. The array was modeled and simulated in RTL level using VHDL, then synthesized to a schematic and finally implemented to a layout using the cell library based on 0.35 $\mu\textrm{m}$ CMOS 1-poly 4-metal CMOS technology.