• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.39-43
• /
• 2007

In high speed communication networks, the determination of a transmission rate is critical for the stability of a closed-loop network system with the congestion control scheme. In ATM networks, the available bit rate (ABR) service is based on a feedback mechanism, i.e., the network status is transferred to the ABR source by a resource management (RM) cell. RM cells contain the traffic information of the downstream nodes for the traffic rate control. However, the traffic status of the downstream nodes can not be directly transferred to the source node in the IP based networks. In this paper, a new rate-based congestion control scheme using an exponential weighted moving average algorithm is proposed to build an efficient feedback control law for congestion avoidance in high speed communication networks. The proposed congestion control scheme assures the stability of switch buffers and higher link utilization of the network. Moreover, we note that the proposed congestion scheme can flexibly work along with the increasing number of input sources in the network, which results in an improved scalability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.308-316
• /
• 2015

In this paper, we carried out performance comparison of four routing protocols that had been proposed for mobile ad hoc networks using the NS-3 network simulator. Those four routing protocols consist of two proactive routing protocols, DSDV(destination-sequenced distance vector) and OLSR(optimized link state routing), and two reactive routing protocols, AODV(ad-hoc on-demand distance vector) and DSR(dynamic source routing). Two performance metrics, system throughput and packet delivery ratio, are adopted and performance evaluation was carried out in a square communication area where each communicating mobile node moves independently. Numerical results show that the AODV routing protocol provides the best performance among those four routing protocols.

• Smart Structures and Systems
• /
• v.12 no.1
• /
• pp.23-39
• /
• 2013

In this article, a smart multifunctional optical system-on-a-chip (SOC) sensor platform is presented and its application for fiber Bragg grating (FBG) sensor interrogation in optical sensor networks is investigated. The smart SOC sensor platform consists of a superluminescent diode as a broadband source, a tunable microelectromechanical system (MEMS) based Fabry-P$\acute{e}$rot filter, photodetectors, and an integrated microcontroller for data acquisition, processing, and communication. Integrated with a wireless sensor network (WSN) module in a compact package, a smart optical sensor node is developed. The smart multifunctional sensor platform has the capability of interrogating different types of optical fiber sensors, including Fabry-P$\acute{e}$rot sensors and Bragg grating sensors. As a case study, the smart optical sensor platform is demonstrated to interrogate multiplexed FBG strain sensors. A time domain signal processing method is used to obtain the Bragg wavelength shift of two FBG strain sensors through sweeping the MEMS tunable Fabry-P$\acute{e}$rot filter. A tuning range of 46 nm and a tuning speed of 10 Hz are achieved. The smart optical sensor platform will open doors to many applications that require high performance optical WSNs.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.1
• /
• pp.86-94
• /
• 2013

In this paper, we propose a network coding scheme that is one of the most promising techniques for overcoming transmission errors in underwater acoustic communications. It is assumed that the proposed scheme operates in a Code Division Multiple Access (CDMA) network where multiple sensor nodes share the underwater acoustic channel in both the frequency and the time domains by means of orthogonal codes. The network topology deploys multi-hop transmission with relaying between multiple source nodes and one destination node via multiple relay nodes. The proposed scheme is evaluated in terms of the successful packet delivery ratio of end-to-end transactions under varying packet loss rates. A computer simulation shows that the successful delivery ratio is maintained at over 95% even when the packet loss rate reaches 50%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.714-727
• /
• 2015

The hierarchical structure in networks is widely applied in many practical scenarios especially in some emergency cases. In this paper, we focus on a tree network with and without packet loss where one source sends data to n destinations, through m relay nodes employing random linear network coding (RLNC) over a Galois field in parallel transmission systems. We derive closed-form probability expressions of successful decoding at a destination node and at all destination nodes in this multicast scenario. For the convenience of computing, we also propose an upper bound for the failure probability. We then investigate the impact of the major parameters, i.e., the size of finite fields, the number of internal nodes, the number of sink nodes and the channel failure probability, on the decoding performance with simulation results. In addition, numerical results show that, under a fixed exact decoding probability, the required field size can be minimized. When failure decoding probabilities are given, the operation is simple and its complexity is low in a small finite field.

• Korean Journal of Materials Research
• /
• v.17 no.12
• /
• pp.660-663
• /
• 2007

Piezoelectric energy harvesting from our surrounding vibration has been studied for driving the wireless sensor node. To change the vibration energy into the electric-energy efficiently, the natural frequency of cantilever needs to be adjusted to that of a vibration source. When adding 6.80g mass on the end of the fabricated cantilever, a natural frequency shifts from 136 Hz into 49.5 Hz. In addition, electro-mechanical coupling factor increased from 10.20% to 11.90% and resulted in the 1.18 times increase of maximum output power.

• Journal of Korea Multimedia Society
• /
• v.5 no.3
• /
• pp.307-315
• /
• 2002

As growing the population of the Internet, e-mail should provide various types of media, and the size of e-mail including multimedia data becomes larger and larger Furthermore, the multimedia e-mail has been used through various communication terminals including mobile devices. The main objectives of this thesis is designing and Implementing efficient mail server which should provide high performance and scalability in terms of storage capacity and the number of mail users. This thesis proposes a cluster-based mail server architecture which has a load-balance node using. If address forwarding for distributing incoming mail messages into distributed mail server nodes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1910-1917
• /
• 2011

In this paper, a cloud computing platform is designed and implemented based on an open source cloud platform, OpenNebula, and Xen hypervisor on each node for efficient computer lab system. For the purpose of convenient management, a web-based user interface has been developed for the cloud virtualization system. Once individual virtual machine is allocated to a user based upon class schedule, each user can access the virtual machine remotely and use appropriate operating system and application programs. The developed system can reduce computer lab upgrade cost, management cost, and administration time considerably.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2569-2574
• /
• 2010

In this paper, we introduce an efficient energy management using a notion of virtual energy system for shared solar-powered sensor network. Virtual energy system is an abstraction that allows sensor network applications on a node to reserve their own fractions of the shared solar cell and the shared rechargeable battery, hence achieving logically partition of a shared renewable power source. Our results show that our design and implementation are reliable, lightweight and efficient, allowing proper isolation of energy consumption among applications.

• Journal of information and communication convergence engineering
• /
• v.6 no.4
• /
• pp.396-404
• /
• 2008

Service discovery is the technology of finding needed services in networks, and a key point in pervasive computing environments. This paper presents a novel service discovery protocol: ASESDP(AIP and SRR Enhanced Service Discovery Protocol). In ASESDP, tow schemes are proposed to enhance its performance: AIP(Advertisement Information Piggybacked) and SRR(Shortest Reply Route). In AIP, parts of advertisement information are piggybacked in the service reply packet, which makes the advertisement information propagating along the reply path, and spreads its transmission area. In SRR, in order to reduce the service response time, the shortest reply route is chosen to forward the service reply packet to the source node sending the service request. With the theoretical analysis and Glomosim simulation results, it is verified that ASESDP can reduce the number of service request packets, save the response time, and improve the efficiency of service discovery.