• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1714-1716
• /
• 2002

Optical fiber sensor is a subject which has been attracted considerable attention in recent year. Especially, it is being developed for the detection and location of partial discharge in oil-filled transformers. In this paper, we propose and experimentally demonstrate directivity and sensitivity of a hollow cylindrical mandrel sensor. The sound source is a PZT actuator of hollow cylinder type. Several layers of the fiber laminated around the mandrel surface and experiments were performed on three axis modes. The experimental results can be applied to analyze detected signals optimally.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.271-277
• /
• 2003

Recently as the environmental noise getting influential social problem, it is the fact that the demand on noise reduction increases with the advance of the standard of living. Therefore increasing the interest on the noise in common, it is eagerly demanded that the endeavour for reducing the noise of the rotating machinery, especially the machinery related a flowing including the household electric products, which is pointed out the primary noise source in environment. As proceeding study for fan noise, theory of fan noise property is arranged and this control method is shown. Blade passage noise of total noise spectrum. Thus in the aspect of noise reduction, noise source and identification of noise radiation characteristics of axial flow fan are demanded in detail. The sound source is analyzed by using sound pressure and sound intensity. In that time, synchronization of axial flow fan using optical sensor is executed, and to identify the location of exact noise source in the fan profile determination of recording time is proposed. In the rotating of tan, it is explained that the location of noise source exists in and by the directivity, the noise radiation pattern of axial flow fan is determined and the flow of sound is visualized in the figure of contour mapping.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1752-1761
• /
• 2000

This paper describes the far-field estimation using the near-field measurement data. Measurement in far-field region gives us the acoustical characteristics of the source but in general measurement is made in near-field such as acoustic water tank or anechoic chamber, so far-field acoustical characteristics of the source should be predicted from near-field data. In this case, the number of measurement points in the near field which relates to the accuracy of the predicted field and the amount of data processing, should be optimized. Existing papers say that measurement points is proportional to kL and depends on geometry and directivity of the source. But they do not give us any definite criterion for the required number of measurement points. Boundary Collocation Method which is one of the far-field prediction methods, is analyzed based on Helmholtz integral equation and Green function and it has been found that the number of measurement points is optimized as 0.54kL which is about one half of the existing results.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.2
• /
• pp.117-129
• /
• 2015

A parametric array is a nonlinear phenomenon that generates a narrow beam of low-frequency sound using the nonlinearity of the medium. The low-frequency sound so generated has a low sound pressure compared with that of sound generated directly. Consequently, a transducer that can generate a primary wave with high directivity and level is required. This study designed, fabricated, and evaluated a multi-resonance transducer as a parametric array source. The designs of the unit transducers and array transducer were based on an analysis model. The design process was repeated to fabricate the optimum transducer. The fabricated transducer array can generate a 189 dB, 190 dB primary wave level at 6.3 m and a 134 dB difference frequency wave using the parametric array phenomenon. The difference frequency wave has a frequency of 15 kHz and high directivity with an $8^{\circ}$ half power beam width in a $12{\times}18{\times}10m$ water tank.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.4
• /
• pp.197-206
• /
• 2011

In this paper, we proposes the virtual sound source panning algorithm in the multichannel system. Recently, High-definition (HD) and Ultrahigh-definition (UHD) video formats are accepted for the multimedia applications and they provide the high-quality resolution pixels and the wider view angle. The audio format also needs to generate the wider sound field and more immersive sound effects. However, the conventional stereo system cannot satisfy the desired sound quality in the latest multimedia system. Therefore, the various multichannel systems that can make more improved sound field generation are proposed. In the mutichannel system, the conventional panning algorithms have acoustic problems about directivity and timbre of the virtual sound source. To solve these problems in the arbitrary positioned multichannel loudspeaker system, we proposed the virtual sound source panning algorithm using multiple vectors base nonnegative amplitude panning gains. The proposed algorithm can be easily controlled by the gain control function to generate an accurate localization of the virtual sound source and also it is available for the both symmetric and asymmetric loudspeakers format. Its performance of sound localization is evaluated by subjective tests comparing with conventional amplitude panning algorithms, e.g. VBAP and MDAP, in the symmetric and asymmetric formats.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1551-1562
• /
• 2000

In the using of FBG developed in home land, we designed and manufactured three types of FBG sound transducers the first in Korea. On FBG transducers manufactured we made an demonstrated on respective frequency response peculiarties in the water and analyzed the special characters. As the experimental result on frequency response peculiarities, we made t possible underwater acoustic detection on C type to maximum 18kHz, And for the purpose of realization on multi-point signal detection on wide scope in the water, in the using of WDM(Wavelength Division Multiplexing) method and passive band-pass filter system, established arrays system and succeeded in multi-point underwater acoustic signal detection to the frequency 1.3KHz out of the two B type FBG transducers. Additionally, it would be possible directivity detection for the objects of its source as the intensity of detection signal varies with the sound source's direction and angle. From now on we prepared a new moment on the practical used study on FBG hydrophone.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.759-764
• /
• 2000

The accurate prediction of aeroacoustic analysis is necessary for designers to control and reduce airflow-induced sound pressure levels in high speed rotating DVD drives. This paper focuses on the numerical prediction of airflow-induced sound in DVD drives. Computational fluid dynamics(CFD) is first conducted to evaluate flow field characteristics due to the high-speed disk rotation, and to support the acoustic analysis. The acoustic analogy based on Ffowcs Williams-Hawkings(FW-H) equation is adopted to predict aeroacoustic noise patterns. The integral solution for quadrupole volume source is included to identify the turbulence noise generated inside the DVD tray. The strength of sound pressure level with respect to rotating speed is discussed to meet upfront demand on the high fidelity product development. The present study also focuses on the noise directivity and examines how much the sound noise is sensitive to change in rotating speed. Near-field noise is strongly affected by the flow field characteristic, which is caused by the complex shape of the tray. For a mid-field, the quadrupole noise play as a counterpart of thickness noise or loading noise, so it generates different sound noise patterns compared with those in the near field.

• Journal of KSNVE
• /
• v.8 no.1
• /
• pp.187-194
• /
• 1998

In order to predict the train noise propagation from a level railroad, this paper presents the model of train noise source and the prediction model based on the results by using the sound intensity method. The prediction model gives the effects of geometric attenuation, ground attenuation, and barrier attenuation of noise. There are several principal assumption in developing model: (a) the train noise is primarily rolling noise; (b) the rail head and wheels are in good condition; (c) the height of source is 10cm above track; (d) the directivity pattern of train noise sources is a dipole source. Calculated results based on this model are compared with available field data and good agreement has been obtained.

• Journal of Sensor Science and Technology
• /
• v.23 no.5
• /
• pp.326-331
• /
• 2014

In this study, a MEMS microphone that uses $Si_3N_4$ as the vibration membrane was produced for application as an auditory device using a sound visualization technique (sound visualization) for the hearing impaired. Two sheets of 6-inch silicon wafer were each fabricated into a vibration membrane and back plate, after which, wafer bonding was performed. A certain amount of charge was created between the bonded vibration membrane and the back plate electrodes, and a MEMS microphone that functioned through the capacitive method that uses change in such charge was fabricated. In order to evaluate the characteristics of the prepared MEMS microphone, the frequency flatness, frequency response, properties of phase between samples, and directivity according to the direction of sound source were analyzed. The MEMS microphone showed excellent flatness per frequency in the audio frequency (100 Hz-10 kHz) and a high response of at least -42 dB (sound pressure level). Further, a stable differential phase between the samples of within -3 dB was observed between 100 Hz-6 kHz. In particular, excellent omnidirectional properties were demonstrated in the frequency range of 125 Hz-4 kHz.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.2
• /
• pp.146-153
• /
• 2014

This study investigates the effects of seat-design elements such as seating arrangement, shape, and height on speech privacy in high-speed trains. For the evaluation of speech privacy, acoustic simulation software was used to reproduce room acoustical conditions in passenger cars on the basis of in-situ measurement data. The influences of speech source directivity and source height on privacy distance ($r_P$) were investigated, and it was found that $r_P$ determined using an omni-directional source was relatively shorter than that determined using a directional source. It was also found that $r_P$ decreased when the source height was lower than the height of the seat-back because the seat-back blocked the propagation of speech from the sound source. The effect of seating arrangement was not significant when comparing the vis-a-vis seating and one-side seating arrangements. In addition, among the alternative seat-designs, the seats that block the space between the seats and cover the space near the ear were found to show significantly enhanced speech privacy in high-speed train passenger cars.