• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.377-383
• /
• 2011

This paper reports the filtered velocity feedback (FVF) controller to reduce the acoustic power from clamped beams. The instability problem due to the non-collocated sensor/actuator configuration when using PZT actuator should be resolved. The roll-off property of the FVF controller at high frequency helps to alleviate the instability. The dynamics of clamped beams under forces and moments pair and the FVF controller are first formulated. The formulation of the sound radiated power is followed. The open loop transfer function (OLTF) synthesized with 100 modes is used to determine the stability of the control system. The control performance is finally estimated. The levels of the vibration and the sound radiated power are reduced in the wide band below the tuning mode of the FVF controller.

• The Journal of the Acoustical Society of Korea
• /
• 제24권3E호
• /
• pp.115-122
• /
• 2005

Two twin microphones may produce particular patterns of binaural directivity by time delays between twin microphones. The boundary element method (BEM) was used for the simulation of the sound pressure field around the head model in order to quantify the acoustic head effect. The sound pressure onto the microphone was calculated by the BEM to an incident sound pressure. Then a planar directivity pattern was formed by four sound pressure signals from four microphones. The optimal binaural directivity pattern may be achieved by adjusting time delays at each frequency while maintaining the forward beam pattern is relatively bigger than the backward beam pattern.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.606-611
• /
• 2008

The objective of the present study is to actively control the flame oscillation in the experimental lean premixed methane burner by the phase-controlled sound waves. The authors propose the methodology of generating the phase-controlled sound waves by directly sensing the preferential frequency and generating the sensor-triggered sound waves with fixed optimum phase difference with the flame oscillation. The real-time controller is implemented in the present study, and the combustion noise reduction is achieved. The reduction is 20dB at peak frequency and 13dB in the OASPL.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(4)
• /
• pp.135-138
• /
• 2001

Many researchers have developed the techniques of an efficient 3-D sound system based on the psycho-acoustics of spatial hearing with multimedia or virtual reality In this paper, we propose an idea for the improved 3-D sound system using conventional stereo headphones to obtain a better sound diffusion from the mono-sound recorded at an anechoic chamber. We use the HRTF (Head Related Transfer Function) for the sound localization and the wavelet filter bank with time delay for the sound diffusion. We investigate the effects of the 3-B sound depending on the length of time delay at lowest frequency band. Also the correlation coefficient of the signals between the left channel and the right channel is measured to identify the sound diffusion.

• 제어로봇시스템학회논문지
• /
• 제10권5호
• /
• pp.421-427
• /
• 2004

In order to exploit underwater resources successfully, the first step would be a marine environmental research and exploration in the seafloor. Generally one sets up a long-term underwater experimental unit in the seafloor and retrieves the unit later after a certain period time. Essential to these applications is the reliable teleoperation and telemetering of the unit. In this paper we presents a robust underwater sound recognition algorithm by which we can identify the sound signal without the influence of disturbances due to underwater environmental changes. The proposed method provides a means suitable for the acoustic releaser which requires low power dissipation and long-time underwater operation. We demonstrate its ability of securing stability and fast sound recognition through simulation methods.

• 제어로봇시스템학회논문지
• /
• 제13권10호
• /
• pp.983-989
• /
• 2007

Most of life thing including human being have tendency of reaction with inherently their own pattern against environmental change caused by such as light, sound, smell etc. Especially, a sense of direction often works as a very important factor in such reaction. Actually, human or animal lift that can react instantly to a stimulus determine their action with a sense of direction to a stimulant. In this paper, we try to propose how to give a sense of direction to a robot using sound being representative stimulant, and tracking sensors being able to detect the direction of such sound source. We also try to propose how to determine the relative directions among devices or robots using the digital compass and the RSSI on wireless network.

• 제어로봇시스템학회논문지
• /
• 제15권3호
• /
• pp.273-279
• /
• 2009

In this paper, we address the problem of detecting incorrect sonar measurements. We use ideas from the inconsistency of information among sonar measurements together with the sound pressure of the wave from the sonar sensor to develop a new method, called the comparison of the sound pressure (CSP), to detect incorrect sonar readings. The inconsistency of information in cells can be a clue that indicates candidates for incorrect measurements, and the sound pressure of the wave from the sonar sensor determines incorrect readings among the candidates. From various experiments, the proposed method is confirmed that it is better than existing method at deciding the state of sonar measurements.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.447-450
• /
• 2005

Multi-channel artificial reverberation algorithm to control perceived direction and distance is described in this paper. In conventional algorithms using IIR filters, reverberation time is the only parameter to be controlled. Moreover, since the convolution-based conventional algorithms apply only same impulse responses, but not considering sound localization, it was not realistic enough. The new algorithm proposed in this paper utilizes early reflections segmented according to the azimuth from which direct sound comes and controls perceived direction by panning the direct sound, and controls perceived distance by adjusting Energy Decay Curve (EDC) of reverberation and gain of the direct sound. In addition, the algorithm enhances Listener Envelopment(LEV) to make late reverberation incoherent among channels.

• 제어로봇시스템학회논문지
• /
• 제16권12호
• /
• pp.1143-1149
• /
• 2010

Because the noise is the main cause for decreasing the performance at speech recognition, the place or environment is very important in speech recognition. To improve the speech recognition performance in the real situations where various extraneous noises are abundant, a novel combination of FIR and Wiener filters is proposed and experimented. The combination resulted in improved accuracy and reduced processing time, enabling fast analysis and response in emergency situations. Usually, there are many dangerous situations in our city life, so for the smarter city it is necessary to detect many types of sound in various environment. Therefore this paper is about how to detect many types of sound in real city, especially on CCTV. This paper is for implementing the smarter city by detecting many types of sounds and filtering one of the emergency sound in this sound stream. And then it can be possible to handle with the emergency or dangerous situation.

• 소음진동
• /
• 제6권6호
• /
• pp.781-790
• /
• 1996

The goal of current research is to suppress the acoustic noise radiated from vibration of composite plate structure. The induced noise can be reduced through the control of the corresponding structural vibration modes by using the piezoelectric materials as actuator. The acoustic fields are to be analyzed through the boundary element method (BEM) based on the Rayleigh intergral equation and structural system through the finite element method (FEM). The suppression of rediated sound is studied by adaping the piezoelectric material as the distributed actuator. Numerical results are presented on the sound radiation from composite plate of arbitrary boundary conditions, the noise reduction adapting the piezoelectric materials as distributed actuator. The results show the effectiveness and possibility of piezoelectric actuator in the control of sound radiation from composite structure.