• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.7
• /
• pp.20-27
• /
• 2002

An analysis model for an elliptical fluid film bearing is described. The principles of hydrodynamic lubrication are outlined together with an expanded version of the governing pressure field equation as related to elliptical journal bearing. Finite element method approximations are given for the pressure field equation and a temperature model, both related to the fluid film thickness. The thermal effects in the lubricant viscosity, lubricant film thickness, variation of the journal rotating speed and influence of turbulence are investigated in this paper A finite element model and an iterative computational process are described, whereby full simultaneously converged field solutions for fluid film thickness, temperature, viscosity, pressure, stiffness and damping coefficient are obtained.

• Journal of Welding and Joining
• /
• v.21 no.3
• /
• pp.40-45
• /
• 2003

The high-speed rotating arc process forms a flat bead surface with decreased penetration depth because the molten droplets are deflected by centrifugal force. Therefore the rotating arc welding for horizontal fillet welding increases the leg length with the increase of rotation frequency and prevents the deflection of weld bead and overlap. In this study, the relationship between the welding parameters and the weld bead shape - leg length and undercut - are investigated experimentally. Consequently, the weld quality could be improved by rotating arc welding, and sound weld bead was achieved when applied to horizontal fillet welding with 4mm gap by avoiding the undercut which is inevitable for the conventional GMA welding methods.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.1
• /
• pp.19-23
• /
• 1986

This paper describes that air noise and underwater noise in the Somjin Estuary are measured and analysed to get the basic data to find out the influence of environment on the underwater. The results obtained are summerized as follows: 1. The spectrum level of air noise in the Somjin Estuary increases until 500Hz, and decreases a little over 2KHz. 2. The spectrum level of underwater noise in the Somjin Estuary increases from 50 Hz to 1 KHz, but it decreases over 1 KHz as the depth is deeper. 3. When the influence of other factors is scarce but the influence of flowing speed is significant, the noise level seems to be higher at speedy layer than at slower layer. 4. The underwater sound level seems to be wider at speedy layer than at slower layer.

• Restorative Dentistry and Endodontics
• /
• v.11 no.1
• /
• pp.11-18
• /
• 1985

The purpose of this study was to observe the facial, lingual and gingival walls of the cavity walls with various kinds of cutting tools. Class II cavities were prepared in newly extracted sound humen mandibular 1st left premolars, and observed in Sanning electron microscope. Diamond point (#201) and Tungsten Carbide burs (#170L) were used in ultra high speed handpieces (rpm 200000), and Tungsten Carbide bur (#702) and Steel bur (#560) were used in conventional handpieces (rpm 6000). All cavities were prepared under water spray, except for some which were finished with a dry abrasive stone (#57). Some cavities were finished with chisels (#41, 42, 83). The following results were obtained. 1. The cavity walls prepared with Diamond point were rougher than the cavity walls with Carbide burs and Steel burs. 2. The chisels were produced the smoothest surface. 3. The cavity walls which were prepared with cutting blades rotated toward enamel surface from outside, were smoother than cavity walls which were prepared with cutting blades rotated toward outside from the enamel surface.

• Journal of Korea Foundry Society
• /
• v.27 no.4
• /
• pp.173-178
• /
• 2007

The bearing bracket, which has produced by the squeeze casting for the high strength in lightweight part of automobile, was developed by the rheocasting process using the H-NCM slurry. Compared with the squeeze casting, the rheocasting process has some merits such as shortening cycle-time, reducing total weight, and increasing productivity. In this study, partial feeding test was carried out by controlling plunger stroke length and compared with semisolid simulation. Optimal casting parameters such as injection speed and stroke variations were established. Sound products with integral microstructure were obtained by the H-NCM slurry and X-ray analysis also showed the integral condition throughout the entire parts.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.88-89
• /
• 1998

In this paper, a transfemoral prosthesis with a microprocessor controlled pneumatic knee developed at KOREC is presented. The resistance of the knee is changed automatically via a microprocessor as the amputee's gait speed changes, so that the prosthetic side of the amputee can follow the sound limb. Gait analysis has been conducted to evaluate the performance of the developed prosthesis and the improvement of the gait pattern including the gait symmetry was observed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.361-364
• /
• 2011

In this paper, This work demonstrates a experimental evaluation for vehicle road noise NVH performance from the component-level NVH measurements of Tire. The power unit noise from tire emitted by cars has been reduced. It has been found that tire noise dominates noise produced by the power train when vehicles are driven at high constant speed. Therefore tire pattern noise is affected by pattern and vehicle and transmission loss. Tire noise mechanism is generated by several mechanisms. The sound of tire can propagate either through the air or through the structure of vehicle. Pattern noise is the result of pressure variations through the air to the interior side of vehicle. Especially, smooth asphalt, the periodicity of tread design, groove depth is important factor, which have an influence on the reduction of tire pattern noise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.115-119
• /
• 2011

Instead of very expensive sound record and professional measurement microphones the low cost Surface Mounted Device (SMD) microphones are proposed for practical barrier ANC system. FRF of the microphones and theirs sensitivity to the wind interferences are evaluated in semi anechoic chamber. The improvement of feedforward algorithm noise reduction index was evaluated based on measured coherence function between tested SMD and reference microphone. Test was performed at various wind speed from 1 m/s to 5 m/s.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.92-95
• /
• 2011

The walls of modern train cars are required to have higher transmission loss since modern train have had high speed and light weight. The method based on Reverberation Chamber like KS F 2808 could be used to measure transmission loss. However, this method has difficulty in that constrained Standard of it requires extremely large facilities. Recently, the method based on Scale Reverberation Chamber is used as an alternative to Reverberation Chamber. The method of Scale Reverberation Chamber is known to be small and economical but it provides standing wave that directly influences measurement error. Therefore, this research is focus on predicting standing waves based on method of FFM and reducing measurement error by changing shape of chamber.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.949-954
• /
• 1999

Speed-up and mass reduction of railway vehicle usually causes increased of the interior noise. One of the best ways to control the interior noise is to identify the noise level radiated from each of parts in the cabin. In this paper, we describe the method to estimate the interior noise nad evaluate the noise contribution to each of parts. This method is based that the sound pressure can be calculated by using the frequency response function and acceleration. According to analysis of the noise contribution, we validated that the noise radiated from the floor is the higher in the cabin. We also measured the noise distribution for the side and floor by using the microphone array in order to analyze the effect of the noise flowing into the cabin from the outdoors. Finally, we presented the plan of the interior noise reduction based on the noise levels radiated from each of parts.