• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.386-392
• /
• 2002

Internet telephony is an application that transmits voice data for conversation. Therefore it must provide high sound quality. However while audio packets are transferred through the network, they are affected by delay variations and jitters, which could result in poor sound quality of the receiving end does not have an appropriate jitter buffer to overcome network factors. This thesis introduces a buffer management algorithm that could be used to provide better sound quality for Internet phone terminals. This algorithm actively responds to both the compression algorithms that are used by the terminals, as well as to the received data to provide an improvement in sound quality. In order to verify the effectiveness of the proposed algorithm, we experimented in variance network settings. The results show that the proposed algorithm improves on the performance of the conventional buffer management algorithm.

• Journal of Drive and Control
• /
• v.13 no.2
• /
• pp.19-25
• /
• 2016

Recently, drivers have begun to regard comfort in the cabin as one of the most important factors in construction equipment like forklifts. Accordingly, it has become more important to design a forklift cabin with a better sound quality as well as lower sound level, which can make a driver more comfortable. In this paper, the correlation between subjective evaluation and Zwicker's sound quality index was analyzed through a blind test by a few workers in forklifts and other construction equipment in several countries. Correlation analysis showed that Loudness and Sharpness were ranked in sequence, and tendencies were different from country to country. Also, contribution analysis for Loudness and Sharpness using operational transfer path analysis (OTPA), which is widely used in the field of noise, vibration, and harshness (NVH), was performed. However, Loudness and Sharpness cannot be used with OTPA directly because there are no linear relationships between the sources and receivers. In this paper, both are calculated by applying the DIN 45631 method with a contribution rate (%) of 1/3 Octave Sound Pressure Level by OTPA method in addition to considering spectral masking.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.7-25
• /
• 1992

A definition of timbre was proposed which suggested its application to two attributes of sound: "a characteristic which gives a clue to the identify of the sound source, and the quality of sounds which corresponds to the emotive impression timbre are multidimensional. Using semantic differential, the factorial invariance of timbre was investigated and it was found that three factors were dominant: "pleasant", "powerful" and "metallic". The generality of these three factors has been confirmed in Japan. The relation between timbre and physical values was examined. Finally, the usefulness of verbal expression concerning timbre has also been discussed.ing timbre has also been discussed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.670-677
• /
• 2009

The purpose of this study is to reveal the quantitative dose-response relationship between the noise emitted in the platform of subway station and the public response. The noise measured in the platform of subway station was used for a jury test. In order to find the factors which influence annoyance response due to the platform noise, jurors were examined for the difference of the annoying response, interrelation of sound quality parameter and annoyance response. The platform noise level was 77.2$\sim$83.9 dBA and the most of passengers at the platform were highly annoyed. And screen door contributes to annoyance reduction of platform noise. The results from analyzing sound quality parameters shows that loudness and annoyance response have a high correlation coefficient.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.384-387
• /
• 2002

Internet telephony is an application that transmits voice data for conversation. Therefore it must provide high sound quality. However while audio packets are transferred through the network, they are affected by delay variations and jitters, which could result in poor sound quality if the receiving end does not have an appropriate jitter buffer to overcome network factors. This thesis introduces a buffer management algorithm that could be used to provide better sound quality for Internet phone terminals. This algorithm actively responds to both the compression algorithms that are used by the terminals, as well as to the received data to provide an improvement in sound quality. In order to confirm the validity of the suggested algorithm, comparisons of the performance have been made between the existing buffer management algorithms and this new algorithm in various network settings.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.9
• /
• pp.853-860
• /
• 2012

This paper identifies a cause of pick up noise in a laser printer and a relationship between pick up noise and major components related to pick up noise. A pick up sound is affected by many components such as spring force, spring constant, and friction coefficient. Objective evaluation for the pick up sound is difficult because of back ground sound such as operating sound. Especially, a sound between a friction pad and a paper in the process of printing has become an essential issue in an aspect of quality evaluation. However the existing criteria for determining the above sound have solely relied on human's subjective judgments; which highlights the requirement to objectify these criteria. In this paper, the standard of existing pick up noise is established by finding the tonality, which is a psychoacoustic parameter, of noticeable limit sound level. Based on the findings of the method, the study has found factors which cause pick up noise and suggests the substitution of following components of printers such as spring constants, spring force, and the quality of friction pads. As a result, it is confirmed that the proposed pick up noise index has usefulness to classify whether existence of pick up noise with an objective evaluation and not to occur the noise based on design optimized combination of laser printer components.

• Korean Journal of Agricultural Science
• /
• v.32 no.2
• /
• pp.243-253
• /
• 2005

In agricultural ecosystem, soils which play important roles of storage and cycling of substances become a crtitical social problem due to rapid increase of contaminants with respect to our health. Soil as productivity should be interpreted as soil quality, that is important criteria in maintaining sustainable agriculture for production of safe food. Therefore, it needs to set the criteria of soil quality by considering environmental factors including relevant parameters which are involved in soil quality soil health because soils are widely distributed and have various characteristics such as physical, chemical, and biological propevties. Therefore, it requires intensive investigation of evaluation methods and development of related parameters for environmentally sound agriculture and safe soil management.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05b
• /
• pp.96-102
• /
• 2003

Today, stage technology is developing highly by application of digital computer. Performance is composed of audio/video and acoustic technology takes very important position in field of stage technology. Generally speaking, four factors of sound are loudness, pitch, sound timbre and duration. Loudness depends on sound pressure level, yet partly related with spectrum and dulation. Pitch depends mainly on frequence and have a relation with sound pressure and duration. sound timbre depends strongly on spectrum and have a relation with frequence. In this paper, I designed a multi-microphone system which can used in broadcasting and performance stage with vicboss 200MHz-VHF wireless microphone and vicboss 900MHz-VHF wireless microphone. I also studied about multi-microphone which can use conveniently in the super play that needs many microphones. If this multi-microphone is prodused, we could expect better sound quality and a big progress in stereo recording technology.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.4
• /
• pp.1-8
• /
• 1996

The sound quality of the car audio system is affected by the serveral factors such as the dimensions of the room, the boundary condition of the wall, the location of the speakers, etc. Among these factors, the location of the car speakers has been focused to find the best location of the car speakers assuming that the flat response is better. To verify the suggestion, the subjective test is adopted using 10 people. The developed method is utilizd to evaluate the function of the audio system with fixed speaker position.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.2 s.107
• /
• pp.149-155
• /
• 2006

There are various types of noise around us such as road traffic noise, aircraft noise and floor impact sound, equipment noise, etc. Researches on the noise criteria and the evaluation method for the diffuser noise of HVAC are insufficient. dB(A) and NC values represented in ASHRAE guide book are applied as a noise criteria for diffuser noise, which have some problems like that the values between dB(A) and NC have deviation even if the sound is same one. Therefore, the evaluation method should be considered and proposed based on the subjective responses. From these reasons, this study aimed to analyze the evaluation factors for the diffuser noise of HVAC reflected on the subjective responses by surveying vocabularies and grouping them with factor analysis.