• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05b
• /
• pp.57-60
• /
• 2004

Electrical arc is the final stage of insulation breakdown and has high current density which cause heat and light in insulator. Insulator under electrical arc lost its insulating strength and eternal damages. Conventional criterion of electrical arc resistance in Standards have depended on the change of sound pressure and light color after damages on insulator by electrical arc. The recognition of these changes is done by human himself which was very subjective and resulted in some error to judge whether insulator has damages or not. This paper has shown that antenna method is the appropriate measure to judge electrical arc resistance for insulator. Antenna measures the electromagnetic waves radiated from tungsten electrodes with 6mm gap regulated by KSC2130. Applied voltage cross two tungsten electrodes have two different methods such as 1/8 10 and continuous 10mA. Signal amplitudes obtained by antenna has diminished after the damage of insulator, which will provide objective and good way to judge the electrical arc resistance.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.4
• /
• pp.414-427
• /
• 2022

This study aims to analyze the color distribution of maxillary permanent incisors in Korean pediatric patients and determine the effects of age and root developmental stage on tooth color. The L^*a^*b^* values of 404 sound and fully erupted maxillary incisors without dental caries, restorations, trauma history or discoloration from 101 Korean patients between ages 7 and 15, with a mean age 10.0 ± 1.5, were analyzed with a spectrophotometer. CIE L^*a^*b^* values were 84.01, 0.17, and 24.07 in maxillary central incisors, and 82.33, 0.31, and 25.99 in maxillary lateral incisors. L^* values of maxillary central incisors were higher, and b^* values of maxillary central incisors were lower than those of maxillary lateral incisors (p < 0.001). The color differences among the subregions exceeded the clinical perceptibility threshold in both of the maxillary central and lateral incisors. L^* value for children at age 10 and younger was 84.13 in maxillary central incisors and 84.04 in maxillary lateral incisors, and those of older patients were 80.62 and 80.56, respectively. L^* value of maxillary incisors of children at age 10 and younger was significantly higher than that of older patients. The root developmental stage did not affect tooth color. This study suggests that the color differences between maxillary central and lateral incisors and among the subregions of a tooth and the effects of age should be considered for aesthetic restorations of permanent incisors in pediatric patients.

• Journal of Fashion Business
• /
• v.6 no.1
• /
• pp.137-154
• /
• 2002

It's not easy to renew old brand of over 50 years history to the tastes of new consumer of our time. Most of national brands that has a history of some 20 years in Korea have strove for continuation and growth of brand to no avails, which can be taken as a good example of current situation. For instance, C company, one of the National brand of US which has a history of 51 years, has made its position secure as a fashion group and based itself on a sound foundation by establishing new marketing strategy and completing successful brand renewal in the process of strategic M&A with Italian company. Those successful marketing strategies are as follows. 1) they regarded both market and consumer oriented marketing activity as company's highest priority strategy and put great emphasis upon concentration on target market and reestablishment of brand image of business casual wear. 2) Setting up and operating planning team composed of merchandizer alone in Milano, they set the direction of plan on the basis of concentrated research on potential item in market according to thorough market research done by buying office in Korea, branch office in Hong Kong and buyer in US prior to blueprint planning for season. 3) Great emphasis was placed on business which focused on intensive presentation of basic key item for apparel career women who are main consumer group in the midium-low prices market in US and on supplementation of size and color. they named this line 'collectibles' and helped their customer develop their own clothes plan without worrying about the change of color and fabric by supporting same fabric and color throughout the year and enabled them to add variation easily by supplementing new trend item. 4) Company set black as a main color that lots of apparel career women find easy to care and to express their own image and presented them with pebble which belongs to navy and beige and added fashion color such as wine and brown etc as season goes by. They constructed basic line in order for their customers to coordinate purchased item with new one or to add them to present collection, and to achieve efficient sale by setting up strategy which allows this cross coordination and changing pattern occasionally. 5) Though basic jacket for 99$, short slim skirt for 49$ are products within midium-low prices range, in the material planning stage aiming at production of item that has both resonable function appealing to consumer and is fashionable, synthetic material had to be used as a main source due to price competitiveness. Despite this situation, considering comfortable sense of fit and refined drape of silhouette that has no sign of cheap material, whole collectible line was divided into two items, which contributed to reduction of cost. In case of material that is composed of triacetate and polyester in 70 to 30 ratio, was used up to 4 million yard, which allowed drastic curtailment of cost accompanied by concentration. In case of 'collectibles' line, using Korean material mainly, C company chose to have their product sewed in Southeast Asian countries where transportation is well developed and both productivity and quality verified by operating global production system which aiming at cutdown of cost through outsourcing production from the country where labor cost is low and getting finished product. Polarization between present consumers telling us that consumers with the mind of middle classes in the past no longer exists between consumers who seek after only fine article of highest quality and wise consumers who are sensible enough to judge bubble on correlation between price and quality. To cope with this change in new consumer mind, apparel makes changing their policy so as to produce item that has reasonable quality and falls within affordable price range anywhere in the world. and they're striving to get out of difficult situation by operating global marketing strategy which stresses separation of planning, production and sale and sensibility of fashion shared worldwide. The marketing strategy of C company can be exemplified as a successful one.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.12
• /
• pp.1047-1053
• /
• 2016

In this study, welding of pure titanium was carried out by using a continuous wave fiber laser with a maximum output of 6.3 kW. Because brittle regions form easily in titanium as a result of oxidation or nitriding, the weld must be protected from the atmosphere by using an appropriate shielding gas. Experiments were performed by changing the type and the flow rate of shielding gases to obtain the optimal shielding condition, and the weldability was then evaluated. The degree of oxidation and nitriding was distinguished by observing the color of beads, and weld microstructure was observed by using an optical microscope and a scanning electron microscope. The mechanical properties of the weld were examined by measuring hardness. When the weld was oxidized or nitrified, the bead color was gray or yellow, and the oxygen or nitrogen content in the bead surface and overall weld tended to be high, as a result of which the hardness of the weld was thrice that of the base metal. A sound silvery white bead was obtained by using Ar as the shielding gas.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.6
• /
• pp.576-584
• /
• 2020

In order to obtain basic information for using polyvinyl alcohol (PVA) gel as a tissue mimicking phantom for temperature visualization, the temperature change characteristics due to the focused ultrasound were examined for different concentration of PVA. To obtain the basic acoustic characteristics, the speed of sound, the attenuation coefficient, and the density depending on the PVA concentration were measured, and the thermodynamic characteristics, such as thermal conductivity and heat capacity, were measured. The range of temperature rising in the vicinity of the focal point due to the focused ultrasound was observed using a thermochromic film that changes color at 30 degree or more, and the discolored area was obtained by image processing of the recorded image. As the concentration of PVA increases in the given range of 2 wt% ~ 16 wt%, the area that rises above 30 degree inside the gel increases linearly. It is confirmed that the discolored area increases as the power applied to the focused ultrasonic transducer increases. These results showed good agreement with the simulation results using the finite element method.

• Korean journal of food and cookery science
• /
• v.32 no.5
• /
• pp.541-548
• /
• 2016

Purpose: For dissecting the possible benefits and usages of Cheonggukjang, five different beans, soybean, black soybean, red bean, chickpea, and lentil bean, underwent the fermentation process along with Bacillus subtilis. Methods: Resultant Cheonggukjang physicochemical and sensory properties such as pH, amino type nitrogen, slime contents, rheological properties, and sensory strength and consumer acceptance were analyzed. Results: Values of pH were found to be highest in Cheonggukjang made with soybean (SC), followed by Cheonggukjang made with black bean (BSC) and Cheonggukjang made with red bean and soybean mixture (RBSC), and lastly Cheonggukjang made with chickpea (CBC) and lentil bean (LBC). Amino type nitrogen values were shown to be highest in SC with a value of $394.74{\pm}28.80mg%$, subsequently were values taken from RBSC, followed by BSC, CBC, and lastly LBC. Slime contents were the highest in SC with a value of $3.44{\pm}0.36%$, with RBSC, BSC, CBC, and LBC without statistical difference. Total colony count was found to show higher value in BSC, SC, and RBSC, in contrast to the lower values found in CBC and LBC. Color was shown to be lightest in CBC and with darker shades shown that of SC, LBC, RBSC, and BSC in descending order. In rheological properties, hardness, adhesiveness, and viscosity were found to be highest in SC. Sensory strength analysis and sticky appearance were highest in SC, with fermented odor being lowest in CBC and BSC. The strength of sweetness, sourness, and umami taste did not show statistical difference, however, bitterness was shown to be highest in LBC and lowest in CBC, SC, and BSC. In the consumer acceptance test, overall acceptance was highest in SC and CBC. Conclusion: In conclusion, SC was found to be the best bean variety for making Cheonggukjang fermented with Bacillus subtilis, however, CBC may act as an alternative for manufacture of Cheonggukjang resulting in sound consumer acceptance.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.540-546
• /
• 2008

In the near future, robots should be able to understand human's emotional states and exhibit appropriate behaviors accordingly. In Human-Human Interaction, the 93% consist of the speaker's nonverbal communicative behavior. Bodily movements provide information of the quantity of emotion. Latest personal robots can interact with human using multi-modality such as facial expression, gesture, LED, sound, sensors and so on. However, a posture needs a position and an orientation only and in facial expression or gesture, movements are involved. Verbal, vocal, musical, color expressions need time information. Because synchronization among multi-modalities is a key problem, emotion expression needs a systematic approach. On the other hand, at low intensity of surprise, the face could be expressed but the gesture could not be expressed because a gesture is not linear. It is need to decide the emotional boundaries for effective robot behavior generation and synchronization with another expressible method. If it is so, how can we define emotional boundaries? And how can multi-modality be synchronized each other?

• The Journal of Internal Korean Medicine
• /
• v.35 no.3
• /
• pp.354-365
• /
• 2014

Objectives: Recently, the utility rate of Korean-Medical service has been a 6 percent of the domestic market share in medical service, so there is a lot of effort to increase utility rate of Korean medical service. However, in spite of the importance of image to promotion, there are still few studies about image of Korean medicine. Thus, the purpose of this study was to suggest ways to increase utility rate of Korean medical service by surveying and analysing recognition of image of Korean Medicine. Methods: People aged between 20s and 40s were targets of investigation. We divided respondents into three groups depending on relation approximation with Korean medicine (weak-related group, normal-related group, strong-related group). The questionnaire consisted of questions about images of Korean medicine, conducted through online and personal interviews. Results: In total, 282 members responded to the survey and the results of the analysis were as follows. The more a person was related to Korean medicine, the greater the tendency to experience Korean medical service. The most associated taste about Korean medical institutions was Bitterness, smell was smell of Korean medicine, color was yellow, feeling was warm, sound (instrument) was drum, and treatment pattern was Acupuncture, respectively. The most associated image of acupuncture was painful, and the most associated age of Korean medical doctors was 40s. The most associated general term of Korean medicine was physical constitution, and most associated pathological term was extravasated blood. Conclusions: This study can be very useful for future image marketing of Korean medicine because there have been no other studies about image on Korean medicine before now. But this study has also some limits like area, respondent selection, etc., so a more detailed and comprehensive survey is needed.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.894-896
• /
• 2003

Koh Chang Island is located near the east border of Thailand. The government of Thailand promotes the island as a model of eco-tourism spots. The Island undeveloped until recent years, is expected to change to major tourist attraction. 'Digital Koh Chang project' has thus. The main objective of this project is to monitor the environment and land use status of the island and to support its sound development. In March 2003, a field survey of this project was planned and field data were collected using both airborne and ground platforms and an ocean vessel. These data were combined with satellite data in the laboratory. This presentation is all balloon-born system field operation. A 5-meter length balloon filled with Helium gas was used, whose payload consisted of two RGB standard color digital still cameras, two directional rotating servo motors, a camera mount cradle as well as signal transmitting and receiving components. A series of aerial high-resolution digital images were rather easily obtained using this inexpensive system, making it possible to monitor intended landscape features in a specific field. Design of simple, low-cost and easily transportable flying platforms and local field surveys using them are useful for getting local ground truth data to calibrate satellite or airborne-based RS data. The design analysis to upgrade the system is further investigated.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.39-49
• /
• 2010

Provision of in-vehicle warning information is of keen interest since it can be effectively used to prevent traffic accident on the road. This study evaluates the effectiveness of information provision modalities based on kansei engineering. Various warning information scenarios using different modalities are devised for the evaluation. Statistical data analysis techniques including factor analysis, correlation analysis, and the general linear model are used to assess the user's affect for information modalities. The evaluation result shows that the provision of visual information consisted of 'text and pictogram' leads to higher understandability. The combination of beep sound and voice message' was identified as a more effective modality for auditory warning. In addition, the red color for the blinking warning signal was preferred by users.