• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.60-67
• /
• 2001

Multicast Protocol for multimedia service on the Internet can be classified into two types, e.g., source based tree and shared tree according to difference of tree construction method. Shared tree based multicast is known to show outstanding results in the aspect of scalability than source based tree. Generally, There have been lots of researches on the method to satisfy QoS constraints through proper Rendezvous Point (RP) in the shared tree. In addition, as the multicast group members join and leave dynamically in the service time, RP of the shared tree should b be reselected for guranteeing Qos to new member, But, RP reselection method has not been considered generally as the solution to satisfy QoS C constraints. In this paper, new initial RP selection and RP reselection method are proposed, which utilize RTCP (Real Time Control Protocol) report packet fields. Proposed initial RP selection and RP reselection method use RTCP protocol which underlying multimedia application service So, the proposed method does not need any special process for collecting network information to calculate RP. New initial RP selection method s shows better performance than random and topology based one by 40-50% in simulation. Also, RP reselection method improves delay p performance by 50% after initial RP selection according to the member’s dynamicity.

• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.613-620
• /
• 2006

From both techlical and economic viewpoints, DiffServ IP QoS architecture is accepted as a more practical solution because of the complexity Problem of the other IntServ architecture. In this paper, we propose several models to support DiffServ QoS in DSL broadband access networks and discuss about migration path from current best-effort DSL networks to DiffServ-enabled ones. Since DSL networks are recently and widely deployed in the world amount ot new investment, compatibility with existing QoS-unaware DSL systems, and compatibility with existing charging systems as well as effective support of various QoS services must be carefully considered when we design DiffServ QoS support models in DSL networks. The DiffServ models proposed in this paper are divided into static DiffServ models and dynamic DiffServ models which are near-term solutions and long-term solutions repecitively. The static DiffServ models include Flat DiffServ which suworts per-subscriber DiffServ QoS and Structured DiffServ which supports per-subscriber and per-service DiffServ QoS. And the dynamic DiffServ models include Direct DiffServ for P2P(Peer to Peer) applications and Indirect DiffServ for ASP(Application Service Provider) applications.

• The KIPS Transactions:PartC
• /
• v.14C no.6
• /
• pp.493-502
• /
• 2007

In this paper, we propose a handoff-aware DiffServ scheduler which intends to guarantee various QoS requirements of multimedia services for mobile nodes in TDD/CDMA based wireless networks. TDD is widely used duplexing mechanism in wireless communications. Unlike FDD, TDD allows a node to symmetrically communicate with a base station by using a single frequency band, resulting in high utilization of wireless resources. DiffServ is regarded as a relatively simple QoS support mechanism and thus it is easy to be extended. This is because DiffServ is not a per-flow based mechanisms and it does not require any signaling protocol. However, previously proposed DiffServ schedulers for wired networks can not be deployed directly into wireless networks since they do not consider properties of wireless networks. As a solution to the problem, DSS(DiffServ Supporting Scheduler) was proposed. DSS uses uplink channel, which is originally used for a node to require a base station to transmit packets, to support QoS efficiently. However, QoS does not consider handoff so that it can not support QoS for moving nodes from one cell to the other cell. Therefor. the proposed handoff support QoS mechanism is necessary for TCC/CDMA networks. The proposed scheme allows a mobile node to achieve seamless service without QoS degradation even for the handoff duration.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.473-477
• /
• 2001

Chitosan has been used as an effective adsorbant for the treatment of wastewater from seafood processing. We investigated the effects of deacetylation degree (DD) and molecular weight (MW) of chitosan on protein adsorption ability and also the optimum conditions of chitosan treatment for protein adsorption in 3 kinds of protein (albumin, hemoglobin and albumin-myoglobin mixture) solutions. The higher deacetylation degree and the lower molecular weight chitosan, the higher adsorption for water soluble proteins was accomplished. The optimum pHs for adsorption of albumin, hemoglobin and albumin-myoglobin mixture (4: 1, w/w) were 4.0, 7.0 and 4.0 respectively and the optimum time was $3\~4$ hrs for all proteins. Sodium chloride in the model system of protein solution was a preventing factor for protein adsorption ability of chitosan (DD=$80\%$, MW=350 kDa).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.2
• /
• pp.107-117
• /
• 1975

Alaska pollack caught in the Northern Pacific Ocean and frozen aboard vessel are skipped to the plant and processed into frozen fillets. In the present paper quality changes during thwaing, refreezing and storage at $-20^{\circ}C$ are discussed. Natural, running-water, vacuum and steam thawing were employed as thawing methods. And contact plate, air blast, immersion in dry ice-alcohol solution freezing and storage at $-5^{\circ}C$ were applied to refreeze the thawed fillets. As quality factors content of drip released, salt-extractable protein, VBN, DNA in the drip and pH were determined. In addition, bacteriological tests were also carried out along with the whole process. In thawing of round material, the vacuum thawing was more effective than any other method, resulting in drip, salt-extractable protein $(N\%)$, VBN and DNA as $4.4\%,\;1.82\%,\;16.21mg\%$ and $13.70\;{\mu}g/ml$, respectively. Storage at $-5^{\circ}C$ as refreezing method yielded lower in drip and DNA content but similar to or slightly higher in both salt-extractable protein and VBN, which might postulate that the quality of the frozen fillet depends not largely on the secondary freezing but on the conditions of thawing and primary freezing. It seemed that most of the bacterial flora in thawed fillet came from skin and viscera of fish, worker's hands, utensils and other processing facilities, since sanitary indicative bacteria were not detected in the frozen flesh of round Alaska pollack. Bacterial quality of fillet varied with thawing methods, vacuum thawing appeared more sanitative compared with other methods as natural, running-water, and steam thawing. Bacterial colonies isolated from the thawed fillet were composed of $73.8\%$ Gram negative rod shape, $4.9\%$ Gram positive rod shape, $18.0\%$ cocci, and $3.3\%$ yeast. Decreasing rate of coliform group of the fillet during the storage at $-20^{\circ}C$ for 30 days was more than $70\%$ and that of plate count was less than of coliform group.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.2
• /
• pp.33-40
• /
• 2018

In an environment with a large network bandwidth, maximizing bandwidth utilization is an important issue to increase transmission efficiency. End-to-end transfer efficiency is significantly influenced by factors such as network, data transfer nodes, and intranet network security policies. Science DMZ is an innovative network architecture that maximizes transfer performance through optimal solution of these complex components. Among these, the data transfer node is a key factor that greatly affects the transfer performance depending on storage, network interface, operating system, and transfer application tool. However, tuning parameters constituting a data transfer node must be performed to provide high transfer efficiency. In this paper, we propose a method to enhance performance through tuning parameters of 100Gbps data transfer node. With experiment result, we confirmed that the transmission efficiency can be improved greatly in 100Gbps network environment through the tuning of Jumbo frame and CPU governor. The network performance test through Iperf showed improvement of 300% compared to the default state and NVMe SSD showed 140% performance improvement compared to hard disk.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.5
• /
• pp.231-240
• /
• 2015

Medical imagery require to protect the privacy with preserving the quality of the original contents. Therefore, reversible watermarking is a solution for this purpose. Previous researches have focused on general imagery and achieved high capacity and high quality. However, they raise a distortion over entire image and hence are not applicable to medical imagery which require to preserve the quality of the objects. In this paper, we propose a novel reversible watermarking for medical imagery, which preserve the quality of the objects and achieves high capacity. First, object and background region is segmented and then predicted error histogram-based reversible watermarking is applied for each region. For the efficient watermark embedding with small distortion in the object region, the embedding level at object region is set as low while the embedding level at background region is set as high. In experiments, the proposed algorithm is compared with the previous predicted error histogram-based algorithm in aspects of embedding capacity and perceptual quality. Results support that the proposed algorithm performs well over the previous algorithm.

• The KIPS Transactions:PartB
• /
• v.15B no.5
• /
• pp.397-406
• /
• 2008

Despite the effectiveness of oriental medical practice in the diagnosis of symptoms and providing cure to it, the preferences in western medicinal values is socially prevalent. The diagnosis of a disease using western medicinal practices provides us with an objective diagnostic result, however, decisions by oriental doctors are based on their heuristic intuitions developed by practice and experience. Objective solutions for the cure of symptoms using oriental medical therapy can have a high impact on the world market. Therefore, development of diagnostic machines based on oriental therapy can enhance the Ocular Inspection which is evaluated as one of the best diagnostic treatment among Oriental Medical Science, is not researched much compared to other diagnoses. Because there is no color diagnosis rules for digital machines to analyze the actual color, looking at the person's face color is one of the most important components to diagnose the disease or illness. The thesis proposes the implementation of absolute observing a person's face color standards of the color settings for objective diagnosis. As a results, comparative digital color analysis for observing a person's face color can be the most effective rule based Color scheme system to diagnose disease. A standard solution for the researching conditions is suggested to reduce the variable which may occur depending on the differences between the researching conditions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.6
• /
• pp.513-523
• /
• 1993

Varietal difference in structural and physical characteristics of rice starch and interrelationships between these starch properties and the physicochemical components of rice grains were investigated for twenty four rice varieties, which were considerably different in amylose content, gelatinization temperature and gel consistency, to obtain the basic informations for diversifying the utility of rice grains and for developing various rice cultivars adaptable to rice food processing. Wave length of maximum absorbance for blue color reaction of starch-I$_2$ complex was 520nm for glutinous rice and 560～600nm for nonglutinous rice. The higher amylose rice showed the longer wave length but there was considerable difference of the wave length among rice materials with similar amylose content. Varietal difference in frequency distribution of debranched starch molecules by isoamylase hydrolysis was largest in amylose fraction, the longest fraction(Fr. I), and was next bigger in intermediate fraction(Int.Fr.) and the ratio between short and long glucose chain of amylopectin fraction(Fr. III /Fr. II). The Fr. III / Fr II ratio was higher in glutinous rice than in nonglutinous one but it was considerably different among nonglutinous rice varieties without any connection with amylose content. The lower alkali digestible rice showed the longer half-hydrolysis time in acid solution. Both soft and hard gel rice varieties in gel consistency test revealed significant varietal difference of 50% acid hydrolysis time. The harder rice in gel consistency exhibited the less frequency of short branch fraction of amylopectin (Fr. III) and the higher amylose content. Twenty four rice varieties were cleary classified by upper two principal components contracted from structural or physical traits of rice starch and some physicochemical properties of rice grain by principal component analysis. The 1st and 2nd principal components can be characterized to components related with amylose and amylopectin structure respectively.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.485-495
• /
• 2017

The purpose of this study is to evaluate the functionality and lightfastness of the natural pigments according to the type of Seokganju used as Dancheong. The commercially available red iron-oxide-based natural pigments that are called Seokganju and Daija manufactured by traditional methods in Korea and Japan were selected. The analysis of the constituent minerals and constituents of 8 kinds of collected Seokganju showed that most of them contained hematite. There are two types of Seokganju according to the $Fe_2O_3$ contents. The type of Seokganju can be characterized not only using the main component but also from the burn-out processing. The chromaticity results for Seokganju with a high $Fe_2O_3$ concentration indicate dark red or grayish brown, while those for Seokganju with a low $Fe_2O_3$ concentration indicate yellowish red or yellowish brown. Samples were prepared by mixing with a glue solution and functional properties were evaluated based on the opacity and spreadability. Coated samples were used in the lightfastness test. The spreadability and opacity of the pigments were measured differently depending on the main component. Most Seokganju samples a showed slight color change until $9,000kJ/m^2$ but rapid color changes were detected after $18,000kJ/m^2$. In particular, burnt Seokganju showed superior lightfastness.