• KSBB Journal
• /
• 제7권2호
• /
• pp.118-125
• /
• 1992

1.에멀젼형 화장품시료의 오염정도는 P. aeruginosa의 증식을 촉진하는 fatty acids, waxs, oils, steroids 등의 유기물에 의존하였다. 2. 오염의 결과, 물성의 변화로서 화장품시료의 pH가 40일 경과시 7.6에서 6.0으로 변화되었다. P. aeruginosa의 영양원으로서는 상대적으로 낮은 굴절률을 갖는 물질들이 소모되어 화장품시료(물:오일=70:30)의 굴절률이 1.4430에서 1.4530으로 변화 되었다. 3. 오염이 진행되는 동안 화장품시료의 相의 안정서이 파괴되었으며, 약간의 변색, 변취와 함께 creaming 및 응집현상이 나타났다. 4. P. aeruginosa의 최적증식조건인 pH7.0, 온도$20^{\circ}C$에서, 물과 오일의 부피비에 의한 균증식은 70:30, 80:20, 30:70, 90:10, 50:50의 순서로 되었다. 5. 방부살균제를 첨가하여 challenge test를 한 결과, P. aeruginosa의 증식이 억제되었으며 40일 경과시 균수는 방부살균제를 첨가하지 않은 경우 $10^8$개/ml에서 p-hydroxy benzoic acid propyl ester + phosphoric acid buffer solution첨가로 $5{\times}10^3$ 개/ml로 감소되었다. 6. 시험균주인 P. aeruginosa에 대한 항균력은 p-hydroxy benzoic acid propyl ester + phosphoric acid buffer solution>p-hydroxy benzoic acid buthyl ester + acetic acid buffer solution>p-hydroxy benzoic acid methyl ester + phosphoric acid buffer solution>p-hydroxy benzoic acid methyl ester + p-hydroxy benzoic acid propyl ester>p-hydroxy benzoic acid buthyl ester + potassium chloride sodium hydroxide buffer solution>p-hydroxy benzoic acid buthyl ester + p-hydroxy benzoic acid propyl ester>p-hydroxy benzoic acid methyl ester + acetic acid vbuffer solution>acetic acid buffer solution _ potassium chloride sodium hydroxide buffer solution의 순으로 우수하였으며 pH, 농도, 균수등은 양호한 수준을 유지하였다.

• 한국생산제조학회지
• /
• 제6권3호
• /
• pp.65-72
• /
• 1997

The horizontal corrosion fatigue tester has been developed for investigating environmental strength. Using this tester, we investigated about corrosion fatigue caracteristics for A106-Gr B steel weldments in 3.5% synthetic seawater and room temperature. Considered parameter is only frequency of 1, 3 and 5Hz.. and Corrosion fatigue crack length was measured by DC potential difference method. From the results, we could find that the horizontal corrosion fatigue tester could be well applied to estimation of fatigue strength. and, In case of 5Hz., corrosion fatigue crack growth pate of A106-Gr B steel weldment was transgranular, and of 1 and 3Hz. showed that transgranular and interfranular was mixed. Also, Material constants of corrosion fatigue crack growth estimated in each frequency were C=9.33$\times$$10^{-9}$ and m=2.93 in 1Hz., C=9.77$\times$$10^{-10}$ and m=3.47 in 3Hz., C=1.02$\times$$10^{-10}$ and m=4.05 in 5Hz

• 한국결정성장학회지
• /
• 제5권1호
• /
• pp.19-24
• /
• 1995

대형 단결정 육성을 위해 TSSG 법에 의해 결정성장을 시도, $8{\times}6{\times}2 mm^3$ 크기의 KLN 결정을 육성하였다. 육성된 결정으로 부터 제2고주파 발생영역에서의 이상광 굴절률 $n_e$는 조성에 따라 변화하며, 조성중의 Li량이 많을수록 감소함을 알았다. 또한 광투과 특성평가에 의해 자외영역으로 부터 적외영역에 걸쳐 광이 투과함을 관측하였으며, 자의영역에서의 투과 한도는 350nm, cut-off파장은 380nm임이 확인되었다.

• 약학회지
• /
• 제44권2호
• /
• pp.107-114
• /
• 2000

We have synthesized 4-isonitroso-4H-1-benzopyran and 4-amino-2,3-dihydro -4H-1-benzopyran of chromone derivatives by using condensation method. Physico-chemical properties of these compounds were measured and analyzed by UV and HPLC method. The correlation coefficient of their methanol solutions by UV were 0.9992 and 0.9994, respectively. And oxime compound was resolved within 4 min and had a detection limit of 3 ng at S/N=3 by HPLC using a reversed phase column with three solvents(MeOH, $H_2O$, HAc). The amino compound was resolved within 4.5 min and had a detection limit of 10 ng at S/N=3 by HPLC under the same conditions. Anti-diabetic effect of chromone derivatives were investigated in the streptozotocin (STZ)-induced diabetic rats. Diabetes was induced in male Sprague-Dawley rats by injections of STZ (45 mg/kg, i.v). The investigation of the hair growth effect of isonitrosobenzopyran and 4-aminobenzopyran on the hair of black mouse (C57BL/6) was also carried out. The administraion of their ethanol solution to the black mouse (C57BU/6) through skin them promoted the growth of hair.

• 한국표면공학회지
• /
• 제54권1호
• /
• pp.37-42
• /
• 2021

Electrodeposition is a synthetic method that allows fine control of the nucleation and growth factors of metals and is a suitable method for studying the nucleation and growth of Ni(OH)2. Hexa-methylenetetramine (HMT) helps to form Ni(OH)2 nanosheets by increasing the OH- of the nickel precursor solution and helps to improve the electrochemical properties of the electrode. In this study, the structural properties of Ni(OH)2 nanosheets according to the HMT concentration change using electrodeposition were studied. As the concentration of HMT increased, the size and thickness of the Ni(OH)2 nanosheet adsorbed on the surface increased and porosity increased. Also, the Scharifker-Hills nucleation theory model and experimental data were compared. In conclusion, the nanosheet shape of the HMT 7.5 mM sample electrodeposited with -0.85 V vs. Ag/AgCl grew most uniformly, and the best result was obtained as an electrode material for a pseudocapacitor.

• 한국컴퓨터산업학회논문지
• /
• 제8권1호
• /
• pp.17-22
• /
• 2007

본 연구에서는 선택적 영역에서 반도체 성질을 갖는 탄소나노튜브을 합성하기 위해 촉매의 구조 및 형태가 탄소나노튜브의 성장에 미치는 영향을 연구하였다. CVD 방법으로 Fe와 Mo 전이 금속을 알루미나 나노 입자속에 삽입한 액상형태의 촉매구조와 박막형태의 나노 덩어리 Fe 금속박막을 증착한 후 실리콘 산화막$(SiO_2/Si)$ 기판에 $700^{\circ}C$ 온도에서 에틸렌$(C_2H_4)$가스를 사용하여 디바이스 사이에 정렬된 탄소나노튜브의 합성 연구를 수행 하였으며, 탄소나노튜브의 성장특성은 SEM과 AFM을 이용하여 분석하였다.

• 한국분말재료학회지
• /
• 제23권4호
• /
• pp.270-275
• /
• 2016

We report on an all-solution-processed hydrothermal method to control the morphology of ZnO nanostructures on Si substrates from three-dimensional hemispherical structures to two-dimensional thin film layers, by controlling the seed layer and the molar contents of surfactants during their primary growth. The size and the density of the seed layer, which is composed of ZnO nanodots, change with variation in the solute concentration. The ZnO nanodots act as heterogeneous nucleation sites for the main ZnO nanostructures. When the seed layer concentration is increased, the ZnO nanostructures change from a hemispherical shape to a thin film structure, formed by densely packed ZnO hemispheres. In addition, the morphology of the ZnO layer is systematically controlled by using trisodium citrate, which acts as a surfactant to enhance the lateral growth of ZnO crystals rather than a preferential one-dimensional growth along the c-direction. X-ray diffraction and energy dispersive X-ray spectroscopy results reveal that the ZnO structure is wurtzite and did not incorporate any impurities from the surfactants used in this study.

• 대한화학회지
• /
• 제60권3호
• /
• pp.169-176
• /
• 2016

Borate 완충용액에서 Al의 부식과 부동화에 관하여 변전위법, 대 시간 전류법 그리고 다중 주파수 전기화학적 임피던스 측정법으로 조사하였다. 공기 또는 산소의 영향은 환원과정에 영향을 주었지만 산화반응에는 영향을 미치지 못 하는 것으로 보인다. 부동화 영역에서 생성되는 피막의 전기적 성질은 Mott-Schottky 식이 적용되는 n-type 반도체 성질을 보였다. 낮은 전극전위에서 생성되는 Al의 산화피막은 Al(OH)₃로 충분한 부동화 효과를 보이지 못하나, 전극전위가 증가하면서 Al₂O₃로 변하였다. Al₂O₃ 피막은 “전기장에 의한-이온의 이동” 과정에 의하여 성장하는 것으로 보인다.

• 한국초지조사료학회지
• /
• 제15권4호
• /
• pp.265-273
• /
• 1995

Seeds of chicory were collected and selected with good germination, emergence and productivity. To develop chicory as a new forage crop seeds were primed with polyethylene glycol (PEG 6000) and coated with some chemicals, and tested in laboratory and field. The results obtained are summarized as follows: 1. Among the seed lines collected, PUlgAH, PU21TH, PU37CH and PU30TK were germinated more quickly and took less time for germination than the others. 2. PUI8AH was the best in emergence and growth although PU21TH showed superior germinative ability among the lines collected. 3. Chicory seeds primed with 20~25% PEG solution for three days at $10^{\circ}C$, or the seeds treated with 25% PEG solution at $15^{\circ}C$ regardless the treatment period showed good germination performances. 4. Osmotic priming with PEG accelerated the germination of chicory, but not in the field. 5. Coated seeds geminated more slowly in Petridishes but showed superior emergence and growth to those of primed or untreated seeds. Treatment 3 showed the best performances in pot experiment. 6. Coated seeds showed remarkable increase in establishment and dry matter yield especially in sod sowing compared to the other sowing method. 7. Most nutrient contents except iron and manganese of chicory were much higher than those of mixed pasture .

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.273.1-273.1
• /
• 2014

Graphene, a two dimensional plane structure of $sp^2$ bonding, has been promised for a new material in many scientific fields such as physics, chemistry, and so on due to the unique properties. Chemical vapor deposition (CVD) method using transitional metals as a catalyst can synthesize large scale graphene with high quality and transfer on other substrates. However, it is difficult to control the number of graphene layers. Therefore, it is important to manipulate the number of graphene layers. In this work, homogeneous solid solution of Cu and Ni was used to control the number of graphene layers. Each films with different thickness ratio of Cu and Ni were deposited on $SiO_2/Si$ substrate. After annealing, it was confirmed that the thickness ratio accords with the composition ratio by X-ray diffraction (XRD). The synthesized graphene from CVD was analyzed via raman spectroscopy, UV-vis spectroscopy, and 4-point probe to evaluate the properties. Therefore, the number of graphene layers at the same growth condition was controlled, and the correlation between mole fraction of Ni and the number of graphene layers was investigated.