• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.376-383
• /
• 2011

The CMCs of LA and LA3 nonionic surfactants obtained from the reaction between glycidol and lauryl alcohol were found to be $0.97{\times}10^{-3}mol/L$ and $1.02{\times}10^{-3}mol/L$ respectively and the surface tensions for 1 wt% surfactant were 26.99 and 27.48 mN/m respectively. Dynamic surface tension measurements using a maximum bubble pressure tensiometer showed that the adsorption rate of surfactant molecules at the interface between the air and the surfactant solution was found to be relatively fast in both surfactant systems, presumably due to the high mobility of surfactant molecules. The contact angles of LA and LA3 nonionic surfactants were 27.8 and $20.9^{\circ}$ respectively and the dynamic interfacial tension measurement by a spinning drop tensiometer showed that interfacial tensions at equilibrium condition in both systems were almost the same. Also both surfactant systems reached equilibrium in 2~3 min. Both surfactant solutions showed high stability when evaluated by conductometric method and the LA nonionic surfactant system provided the higher foam stability than the LA3 nonionic surfactant system. The phase behavior experiments showed a lower phase or oil in water (O/W) microemulsion in equilibrium with an excess oil phase at all temperatures studied. No three-phase region was observed including a middle-phase microemulsion or a lamellar liquid crystalline phase.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.12
• /
• pp.47-54
• /
• 2011

Consolidation behavior of soft clay is generally to be affected by its compressibility and deformation characteristics. Especially, soil permeability depends on soil characteristics including its type of anisotropy. Coefficient of permeability of soft clay is mostly estimated by using laboratory(Oedometer test) and in-stiu piezocone test. The permeability characteristics of soft clay is estimated by excess pore pressure dissipation test results. In this study, the tests were performed to find out the validity of the existing theoretical formula in clay by pore pressure dissipation test and laboratory test results. After grasping of variation the coefficient of permeability ratio(${k_{h}/k_{v}}$) in different clay soils, it was found out adequate solution of in-stiu permeability ratio(${k_{h}/k_{v}}$). Piezocone tests and laboratory tests were performed at the site of pilot project of ground improvement at Yangsan-Mulgeum, Gyeongsangnam-do. Comparisons of the estimated values of ${k_{h}/k_{v}}$ using piezocone tests results and those from laboratory consolidation tests were carried out. Test results show that values of ${k_{h}/k_{v}}$ by piezocone test result(5.85) is similar of it's laboratory test(5.28).

• 한국노년학
• /
• v.37 no.2
• /
• pp.309-328
• /
• 2017

The purpose of this study is to develop a perceived elderly stigma scale for intergenerational research and practice. Although negative stereotypes on elderly population have worsened physical and psychological health of older people, there has been a lack of systematic efforts to measure and monitor stigmatic perception and behavior of younger generation on elderly people. We initially constructed a 34-item perceived elderly stigma scale, by integrating the processes of literature review and exploratory item generation. After confirming the face validity of the scale, a 31-item perceived elderly stigma scale was tested with 252 adults recruited from an online research panel. The result of an exploratory factor analysis suggests a 5-factor solution with 28 items: ability, personality, appearance, authoritarian dependancy, and family-obsession. The convergent/discriminant validity was confirmed by examining its relationships with ageism, elderly discrimination, attitude toward elderly, and respect for elderly. After a series of refinement and empirical tests, the perceived elderly stigma scale would contribute to understanding the current state of elderly discrimination in our society and to develop necessary policies and promotion strategies to eliminate intergenerational conflicts.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.467-474
• /
• 2020

Carbon nanotube has excellent mechanical strength and functionality, so it has been utilized in various applications. In recent years, utilization of carbon nanotube in construction material has started to get interests from researchers in the area of construction materials. However, there is limited amount of work with respect to the rheological properties of cement paste using carbon nanotube. In this work, solution made of multi-walled carbon nanotube with dispersing agent of polyvinyl pyrrolidone was used to prepare cement paste specimens, and rheological properties and 28 day compressive strengths of cement paste using multi-walled carbon nanotube were measured. According to the experimental results, as the amounnt of multi-walled carbon nanotube increased, plastic viscosity and yield stress of cement paste specimens also increased. It was also found that such effect was higher with lower w/c cement paste specimens. With respect to the compressive strength, it was maximized at carbon nanotube content of 0.1wt.% for w/c 0.30 cement paste, whereas the maximum strength of w/c 0.40 cement paste was observed with carbon nanotube content of 0.2wt%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.6
• /
• pp.282-286
• /
• 2021

Penetration depth and compressive residual stress of laser-carburized TiZrN coating by thickness of carbon paste were investigated in terms of carbon potential. The carbon paste was covered with a thickness of 1.1 mm using screen printing, and applied to a thickness of 0.4 mm using spin coating, and laser carburization was performed under the same conditions. As the thickness of carbon paste increased, the diffraction pattern of the laser-carburized TiZrN coating shifted to a lower angle, indicating solid solution strengthening and lattice distortion. For microstructure analysis using TEM, the defects and carbon concentration of the laser-carburized TiZrN coating increased as the carbon paste was thicker. It indicated that the variation of the carbon potential corresponds to the change in the paste thickness. In XPS depth profile analysis, high concentration of carbon and formation of carbide were observed in laser-carburized TiZrN coating with thick carbon paste. It revealed that the carbon concentration on the surface and carbon potential were changed by the thickness control of carbon paste. The compressive residual stress increased from 3.67 GPa to 4.58 GPa by the variation of carbon concentration.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.333-349
• /
• 2021

As information is recognized as an important asset of an organization, organizations are increasing their resource input for knowledge management. In particular, the enterprise content management system(ECMS) is a solution for organization-oriented content management, and it has high utility by helping to achieve business performance through systematic utilization of content and improve the level of internal information security. The purpose of this study is to suggest a plan to improve the intention to use organizational employee's ECMS and to suggest the effect of the relationships between information system quality characteristics and work environment characteristics on intention to use. In this study, a research hypothesis was presented based on previous studies, a questionnaire was conducted on workers of organizations that adopted an ECMS, and the hypothesis was verified by applying structural equation modeling. As a result of the analysis, information and service quality of the ECMS and task interdependence increased the intention to use, but task conflict decreased the intention to use. In addition, task interdependence and task conflict moderated the positive relationship between the quality factors of the ECMS and the intention to use it. This study has implications in terms of suggesting the direction of the organization's behavior through factors that increase the use of ECMS.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.227-237
• /
• 2020

In the 30th edition of , Chunhyang is conventionally presented as a woman who tries to protect her chastity and it eventually bears the fruits of her love. On the other hand in , Chunhyang is reinterpreted as a woman who strives to protect feminist self-consciousness and beliefs, even in unreasonable social situations. By comparing the two different works, we can see differences in the behavior of the characters in how to overcome various obstacles, such as irregularity, gender discrimination, and identity conflict. By reinterpreting the emotions of the characters in the classic novel into the emotions of the modern characters, we can see the how the characters grow when trying to overcome the situation and find a solution, even though there is no change yet. This can be seen as the emotions of the characters become different as time goes by. As the times go by, the world's values and inclinations also change, and the irrationalities of the world will also go in various directions. Through the fusion of culture into history, even though it's irrational but we become familiar with it and will clearly understand the absurdities, and we can look forward to changes in the process.

• Journal of Intelligence and Information Systems
• /
• v.29 no.1
• /
• pp.107-119
• /
• 2023

The technology that recognizes a soldier's motion and movement status has recently attracted large attention as a combination of wearable technology and artificial intelligence, which is expected to upend the paradigm of troop management. The accuracy of state determination should be maintained at a high-end level to make sure of the expected vital functions both in a training situation; an evaluation and solution provision for each individual's motion, and in a combat situation; overall enhancement in managing troops. However, when input data is given as a timer series or sequence, existing feedforward networks would show overt limitations in maximizing classification performance. Since human behavior data (3-axis accelerations and 3-axis angular velocities) handled for military motion recognition requires the process of analyzing its time-dependent characteristics, this study proposes a high-performance data-driven classifier which utilizes the long-short term memory to identify the order dependence of acquired data, learning to classify eight representative military operations (Sitting, Standing, Walking, Running, Ascending, Descending, Low Crawl, and High Crawl). Since the accuracy is highly dependent on a network's learning conditions and variables, manual adjustment may neither be cost-effective nor guarantee optimal results during learning. Therefore, in this study, we optimized hyperparameters using Bayesian optimization for maximized generalization performance. As a result, the final architecture could reduce the error rate by 62.56% compared to the existing network with a similar number of learnable parameters, with the final accuracy of 98.39% for various military operations.

• International Journal of Computer Science & Network Security
• /
• v.22 no.12
• /
• pp.63-70
• /
• 2022

The essence of the definition of "tolerance" is analyzed. Motivational, knowledge and behavioral criteria for tolerance of future teachers are highlighted. Indicators of the motivational criterion are the formation of value orientations, motivational orientation, and the development of empathy. Originality and productivity of thoughts and judgments, tact of dialogue, pedagogical ethics and tact are confirmed as indicators of the knowledge criterion. The behavioral criterion includes social activity as a life position, emotional and volitional endurance, and self-control of one's own position. The formation of tolerance is influenced by a number of factors: the social environment, the information society, existing stereotypes and ideas in society, the system of education and relationships between people, and the system of values. The main factors that contribute to the education of tolerance in future teachers are highlighted. Analyzing the structure of tolerance, it is necessary to distinguish the following functions of tolerance: - motivational (determines the composition and strength of motivation for social activity and behavior, promotes the development of life experience, because it allows the individual to accept other points of view and vision of the solution; - informational (understanding the situation, the personality of another person); - regulatory (tolerance has a close connection with the strong - willed qualities of a person: endurance, selfcontrol, self-regulation, which were formed in the process of Education); - adaptive (allows the individual to develop in the process of joint activity a positive, emotional, stable attitude to the activity itself, which the individual carries out, to the object and subject of joint relations). The implementation of pedagogical functions in the information society: educational, organizational, predictive, informational, communicative, controlling, etc. provides grounds to consider pedagogical tolerance as an integrative personal quality of a representative of any profession in the field of "person-person". The positions that should become conditions for the formation of tolerance of the future teacher in the information society are listed.

• Journal of Science Education
• /
• v.47 no.2
• /
• pp.139-153
• /
• 2023

This study aimed to investigate the effect of environmental education programs using action learning on elementary school students' environmental literacy and self-efficacy. To this end, an environmental education program using action learning was applied to 22 sixth graders of 'A' Elementary School in Busan. The results of this study were as follows. First, environmental education programs using action learning were effective in improving the environmental literacy of elementary school students. After implementing the environmental education program using action learning, students' environmental values, cognitive, and procedural ability changed positively. Environmental issues awareness and ecological knowledge improved, and there was a significant increase in environmental behavior and environmental function. Second, environmental education programs using action learning were effective in enhancing the self-efficacy of elementary school students. After implementing environmental education programs using action learning, students' confidence in problem solving and their ability to judge their behaviors improved. Third, elementary school students showed active participation and interest when conducting environmental education programs using action learning. Students have become open to protecting the environment when they find problems, devise solutions, and practice them. After reflection, it was confirmed that students' immersion and satisfaction in class were high as a solution was reached, leading to efforts to sell items they did not use and donate profits to environmental protection organizations.