• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.4
• /
• pp.539-550
• /
• 1998

A computerized layout system based on a constraint satisfaction problem (CSP) technique was developed to treat both facility layout and instrument panel layout problems. This layout system attempts to allocate various facilities under multiple layout criteria including qualitative design objectives. Since most of the design objectives can be understood as constraints which the layout solution must satisfy to improve the goodness of the solution, a CSP technique was employed to solve the multi-constraints layout problem. The effectiveness of the system was evaluated by the comparison with the well-known facility layout program, CORELAP. Furthermore, the proposed system can also be applied to the instrument panel layout problem successfully. Several user-centered guidelines were well reflected on the solution obtained. CONSLAY, the prototype layout system being developed in the research, greatly enhanced the interactions with the designer so as to deal with the problem-dependent nature of the layout problem and to properly reflect the domain-specific knowledge of the designer.

• Corrosion Science and Technology
• /
• v.20 no.5
• /
• pp.231-241
• /
• 2021

The objective of this study was to evaluate total current under steady-state conditions for a material undergoing corrosion using the electrochemical frequency modulation (EFM) technique, taking into account the presence of solution resistance and double layer capacitance. The analysis involving linearization of the Tafel curve allowed for the estimation of corrosion parameters. Results showed that the output signal was dependent on fundamental frequencies and their multiples. In addition, the output signal almost manifested itself at frequencies that were sums of fundamental frequencies of the applied sinusoidal signal. The harmonics calculated showed a significant shift from the principal frequency of input signals. The investigation involved the influence of corrosion current and anode-to-cathode Tafel slope ratio on faradaic and non-faradaic currents (including the average and RMS). The model presented showed both qualitative and quantitative improvements over the previously developed EFM technique that ignored the influence of solution resistance and the double layer capacitance while assuming the applied DC potential corresponded to the corrosion potential of the corroding material.

• The KIPS Transactions:PartD
• /
• v.10D no.7
• /
• pp.1145-1148
• /
• 2003

We show the mixed finite element method which induces solutions that has the same order of errors for both the gradient of the solution and the solution itself. The technique to construct an efficient reusable matrix is suggested. Two families of mixed finite element methods are introduced with an automatic generating technique for matrix with my order of basis. The generated matrix by this technique has more accurate values and is a sparse matrix. This new technique is applied to solve a minimal surface problem.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.2
• /
• pp.141-154
• /
• 2004

The objective of this paper is to develop the efficient heuristic method for solving the minimum makespan problem of the job shop scheduling. The proposed heuristic method is based on a constraint satisfaction problem technique and a improved randomizing search algorithm. In this paper, ILOG programming libraries are used to embody the job shop model, and a constraint satisfaction problem technique is developed for this model to generate the initial solution. Then, a improved randomizing search algorithm is employed to overcome the increased search time of constrained satisfaction problem technique on the increased problem size and to find a improved solution. Computational experiments on well known MT and LA problem instances show that this approach yields better results than the other procedures.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.370-375
• /
• 2005

This paper describes a systematic way of identifying the horizontal coefficient of consolidation for clayey soil under undrained condition and silty soil under partial drained condition by applying an optimization technique to the early part of dissipation data measured from the self-boring pressuremeter strain holding test. An analytical solution developed by Randolph & Wroth (1979) was implemented in normalized form to express the build-up and dissipation of excess pore pressures around a pressuremeter as a function of the rigidity index. Horizontal coefficient of consolidation was determined by minimizing the differences between theoretical and measured excess pore pressure curves using optimization technique. It was found that the proposed optimization technique can evaluate in-situ horizontal coefficient of consolidation rationally, which is similar with that obtained from the piezocone dissipation test. Furthermore, proposed method can evaluate appropriate coefficient of consolidation for soil under partially drained condition.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.2
• /
• pp.50-54
• /
• 2009

In this paper, we address a novel system-level power management technique which is specifically targeted for an ARM 11 MPCore system. Our proposed solution is a DPM technique which includes process monitoring, real time power analysis, and policy application to reduce the power consumption while meeting the performance requirement. One of the main contributions of this paper is that we systematically infer QoS requirements of processes without getting any additional information from the application. When multiple processes are running under various user level policies, priorities of the policy application are determined in such a way that the overall system performance is maintained while power consumption is effectively managed. Experimental results show that our DPM technique is very effective in reducing power consumption without violating system's QoS requirements.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.3
• /
• pp.181-187
• /
• 2014

Dealing with uncertainty is always a challenging problem. Intuitionistic fuzzy sets was presented to manage situations in which experts have some membership and non-membership value to assess an alternative. Hesitant fuzzy sets was used to handle such situations in which experts hesitate between several possible membership values to assess an alternative. In this paper, the concept of intuitionistic hesitant fuzzy set is introduced to provide computational basis to manage the situations in which experts assess an alternative in possible membership values and non-membership values. Distance measure is defined between any two intuitionistic hesitant fuzzy elements. Fuzzy technique for order preference by similarity to ideal solution is developed for intuitionistic hesitant fuzzy set to solve multi-criteria decision making problem in group decision environment. An example is given to illustrate this technique.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.3
• /
• pp.95-105
• /
• 2002

This paper considers the sequencing of products in car assembly lines under Just-In-Time systems. Under Just-In-Time systems, the most important goal for the sequencing problem is to keep a constant rate of usage every part used by the systems. In this paper, tabu search technique for this problem is proposed. Tabu search is a heuristic method which can provide a near optimal solution in real time. The performance of proposed technique is compared with existing heuristic methods in terms of solution quality and computation time. Various examples are presented and experimental results are reported to demonstrate the efficiency of the technique.

• Steel and Composite Structures
• /
• v.14 no.6
• /
• pp.605-620
• /
• 2013

This paper provides an innovative iteration technique for the large deflection problem of annular plate. After some manipulation, the problem is reduced to a couple of ODEs (ordinary differential equation). Among them, one is derived from the plane stress problem for plate, and other is derived from the bending of plate. Since the large deflection for plate is assumed in the problem, the relevant non-linear terms appear in the resulting ODEs. The pseudo-linearization procedure is suggested to solve the problem and the nonlinear ODEs can be solved in the way for the solution of linear ODE. To obtain the final solution, it is necessary to use the iteration. Several numerical examples are provided. In the study, the assumed value for non-dimensional loading is larger than those in the available references.

• Kyungpook Mathematical Journal
• /
• v.62 no.4
• /
• pp.673-687
• /
• 2022

In this study, we solve the Cayley inclusion problem and the fixed point problem in real Hilbert space using Tseng's technique with inertial extrapolation in order to obtain more efficient results. We provide a strong convergence theorem to approximate a common solution to the Cayley inclusion problem and the fixed point problem under some appropriate assumptions. Finally, we present a numerical example that satisfies the problem and shows the computational performance of our suggested technique.