• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.193-196
• /
• 2001

One of the major reasons for not integrating a VCO on one-chip in a PLL (phase locked loop) system is the large chip-to-chip variation of the VCO (voltage controlled oscillator) center frequency. In this thesis, a simple bias technique is proposed to compensate the process fluctuation. The proposed bias technique is applied to the VCO and it reduces the deviation of the VCO center frequency from 35% to 8 %. With the suggested bias technique, a 400 MHz frequency synthesizer is designed for general purpose. It utilizes a programmable divider for various division ratio. The design methodology provides the possibility of the one-chip solution for a PLL system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.3
• /
• pp.181-196
• /
• 2014

Cloud computer technology currently provides diverse services based on a comprehensive environment ranging from hardware to solution, network and service. While the target of services has been extended from institutions and corporations to personal infrastructure and issues were made about security problems involved with protection of private information, measures on additional security demands for such service characteristics are insufficient. This paper proposes a multi-session authentication technique based on the characteristics of SaaS (Software as a Service) among cloud services. With no reliable authentication authority, the proposed technique reinforced communication sessions by performing key agreement protocol safe against key exposure and multi-channel session authentication, providing high efficiency of performance through key renewal using optimzied key table. Each formed sessions have resistance against deprivation of individual confirmation and service authority. Suggested confirmation technique that uses these features is expected to provide safe computing service in clouding environment.

• Journal of Korea Multimedia Society
• /
• v.9 no.6
• /
• pp.750-761
• /
• 2006

As CBD technologies and researches have been matured, component framework as a larger reuse unit than component is being introduced. Especially issues related with adaptation and integration of components in CBD are being raised as a new research topic. The component framework is given as a solution to resolve these issues. However, current approaches don't suggest a sound and comprehensive reference model and development process applying reference model. In order to develop practical and stable component framework, reference model and concrete guidelines are essential elements. In this paper, we propose a generic reference model integrating existing reference models and a design technique of component framework based on it. Especially, we propose concrete and pragmatic guidelines such as how to design component framework architecture's view and style, how to design commonality and variability of component framework, how to design macro workflows among components, and so on. We believe that the proposed reference model becomes basis for component framework development, and the proposed design technique will support reliable and effective development of the component framework.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.630-634
• /
• 2003

This paper proposes a Carrier-Rotation PWM technique that is new solution for the voltage unbalancing problem of flying capacitors in the Flying Capacitor Multi-level Inverter (FCMI).The proposed PWM technique equalizes the utilization of phase leg voltage redundancies corresponding to the charging and the discharging state of flying capacitors during one switching period of all the switches. it also has the same switch utilization and the reduced harmonics of output voltage. Hence, it is more suitable for the FCMI compared with the conventional solutions. Experimental results on the laboratory prototype flying capacitor 3-level inverter confirm the validity of the proposed PWM technique.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.71-78
• /
• 2005

The purpose of this study is to suggest a hyperfine maskless writing technique by using the nanoindentation and HF wet etching technique. Indents were made on the surface of Pyrex7740 glass by the hyperfine indentation process with a Berkovich diamond indenter, and they were etched in $50\;wr\%$ HF solution. After etching process, convex structure was obtained due to the deformation-induced hillock phenomena. In this study, effects of indentation process parameters (etching time, normal load, loading .ate, hold-time at the maximum load) on the morphologies of the indented surfaces after isotopic etching were investigated from an angle of deformation energies. Finally, sample characters were written to show the possibility of the application.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.2
• /
• pp.304-311
• /
• 2001

The present work examines the influence of surface coating on the temperature and the thermo-mechanical stress field produced by friction due to sliding contact. A two-dimensional transient model of a layered medium submitted to a moving heat flux is prsented. A solution technique based on the boundary element method employing the multiregion technique is utilized. Results are presented showing the influence of coating thickness, thermal properties, Peclet number, and mechanical properties. It has been shown that the mechanical properties and thickness of coating have a significant influence on the stress field, even for low temperature increase. The effects of the ratios of shear modulus become more important for low temperature increase than the effects of the ratios of other mechanical properties.

• Journal of Fashion Business
• /
• v.13 no.2
• /
• pp.115-122
• /
• 2009

Marbling dyeing technique shows beautiful flowing pattern because the pattern is transferred to the medium by the pigments floating onto the viscous solution base. However, this marbling pattern does not have any reproducibility and the result of accidental pattern formation. Marbling process contains many complicated procedures such as making marbling base, mordanting the medium, and bubble removal with size limitation. Computer changed the many aspects in textile design and digital technique is used in many design production. However, it is impossible to produce marbling pattern with digital drawing. In this research, the digital textile design starting from marbling pattern was developed for digital textile printing. Marbling was done to produce the initial motifs and scanned. Several marbling media such as silk, polyester, and paper were used. Photoshop was used to process and develop textile design based on these marbling motifs. One repeat was developed and various colorways were tried. The developed textile design were printed using DTP.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.79-81
• /
• 1994

A solution of magnetic fields for amorphous core transformer has been tried using homogenization technique. The technique, which is derived by applying asymptotic expansion to the standard finite element method, is helpful to analyse a joint part of amorphous core transformer microscopically. A butt-lap-step joint type of lamination method is modeled and its equivalent reluctivity is calculated to analyse various quantities of the magnetic fields. The algorithm is also applicable to other electric devices which have complicated material structure with repeated patterns.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.63-67
• /
• 2000

In this paper, the electromagnetic interference of a parallel plate with apertures is characterized by the method of moment(MoM), using the Spline-type Divided-Difference Interpolation(SDDI) technique. Particularly, for the solution of the problem, the application of the SDDI technique is extended to the calculation of the summation-type Green's functions. It improves numerical efficiency, having accuracy and saving the overall computational time required in the MoM application. For validating the proposed method, the electric fields on the apertures are calculated and compared to those of the literature. The numerical results show good agreement with them.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.125-130
• /
• 2016

Automatic quality inspection by computer vision can be applied and give a solution to the pharmaceutical industry field. Pharmaceutical capsule can be easily affected by flaws like dents, cracks, holes, etc. In order to solve the quality inspection problem, it is required computationally efficient image processing technique like thresholding, boundary edge detection and segmentation and some automated systems are available but they are very expensive to use. In this paper, we have developed a dented capsule image processing technique using edge-based image segmentation, TLS(Total Least Squares) curve fitting technique and adopted low cost camera module for capsule image capturing. We have tested and evaluated the accuracy, training and testing time of the classification recognition algorithms like PCA(Principal Component Analysis), ICA(Independent Component Analysis) and SVM(Support Vector Machine) to show the performance. With the result, PCA, ICA has low accuracy, but SVM has good accuracy to use for classifying the dented capsule.