• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.4
• /
• pp.42-50
• /
• 1995

To study the effect of welding methods on the Stress Corrosion Cracking (SCC) behavior of welded AISI type 316L and 304 austenitic stainless steel, the Slow Strain Rate Technique(SSRT) has been adopted in the boiling 45 wt% $MgCl_2$ solution. The results are as follows. 1) Welded sections are more susceptible than base metal in SCC, and the rank of SCC, and the rasistance in welding method is TIG, MIG, $CO_2$ and ARC. 2) The Ultimate tensile strength(UTS) and the strain of both base metal and welded joint are reduced as decreasing extension rate. 3) The SCC resistance of 316L base metal and welded sections are superior than that of 304. 4) The tendency of pitting and the SCC suseptibility are agreed well, and the SCC site is welded deposit section in 316L whereas HAZ in 304.

• Macromolecular Research
• /
• v.10 no.5
• /
• pp.282-285
• /
• 2002

In this paper, we report a modified technique for the production of oriented continuous nanofibers instead of non-woven mats using a rapidly rotating collection device. We are interested in retaining physical properties such as electrical conductivity of fiber bundles in their axial direction. The experiments were performed using polyethylene oxide (PEO) and its blend with polyaniline (PANI). According to the results, a typical fiber with a uniform diameter of about 100 nanometer was produced. The fibers from the PEO/ CHCl$_3$ solution show high crystallinity and good orientation whereas the fibers from the blend solution of PEO/PANI/m-cresol and CHCl$_3$ show no preferred orientation. However, the fibers of the blend exhibit high electrical conductivity of 33 S/cm for a fiber bundle at a PANI level of 50 %.

• Journal of the military operations research society of Korea
• /
• v.13 no.1
• /
• pp.101-115
• /
• 1987

This paper presents an optimization based heuristic algorithm for a tour bus scheduling problem where buses consist of various kinds of sightseeing and commutation services. First, this algorithm transforms the prolem into a vehicle routing problem on whose nodes denote trips and arcs denote connections between trips. Second, a greedy heuritic routing technique is applied to find a good feasible bus-route set. Then the greedy feasible solution is improved by the simplex method using column generation technique. The algorithm provides a better near-optimal solution which gives much reductions in the total tour distance and the number of tour buses.

• Journal of Biosystems Engineering
• /
• v.23 no.2
• /
• pp.167-178
• /
• 1998

An Aero-NFT nutriculture system using microcomputer for cultivation of greenhouse melon was developed and the performance of the system was evaluated through experiments. The system could control temperature, EC and pH of the nutrient solution within the error ranges of $\pm$ 0.2$^{\circ}C$, $\pm$ 0.2 mS/cm, $\pm$ 0.1 pH, respectively. The results of cultivation experiment showed that temperature, EC and pH of the nutrient solution were generally controlled within the setting ranges during cultivation period. The growth results were good until pinching, but the fruit quality of melons was not high except sweetness and shape. To optimize performance of the system, more techlical information for nutriculture of greenhouse melon was needed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.76-76
• /
• 2000

The calibration of the robot system with a visual sensor consists of robot, hand-to-eye, and sensor calibration. This paper describe a new technique for computing 3D position and orientation of a 3D sensor system relative to the end effect of a robot manipulator in an eye-on-hand robot configuration. When the 3D coordinates of the feature points at each robot movement and the relative robot motion between two robot movements are known, a homogeneous equation of the form AX : XB is derived. To solve for X uniquely, it is necessary to make two robot arm movements and form a system of two equation of the form: A$_1$X : XB$_1$ and A$_2$X = XB$_2$. A closed-form solution to this system of equations is developed and the constraints for solution existence are described in detail. Test results through a series of simulation show that this technique is simple, efficient, and accurate fur hand/eye calibration.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2009.10a
• /
• pp.131-135
• /
• 2009

This paper considers the sequencing of products in car assembly lines. The sequence which minimizes overall utility work in car assembly lines reduce the cycle time and the risk of conveyor stopping. The sequencing problem is solved using Tabu Search. Tabu Search is a heuristic method which can provide a near optimal solution in real time. The performance of proposed technique is compared with existing heuristic methods in terms of solution quality and computation time. Various examples are presented and experimental results are reported to demonstrate the efficiency of the technique.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.663-668
• /
• 1995

Ion transport of a polypyrrole/chloride (PPy/Cl) film and a polypyrrole/poly(styenesulfonate) (PPy/PSS) film as a function of applied dc potential was investigated by employing electrogravimetric impedance technique and electrochemical impedance technique. The cation and anion contribution to the whole charge capacitance and the diffusion coefficients of cation and anion in a PPy/PSS film were calculated by fitting the electrogravimetric impedance data with proposed model circuit. The diffusion coefficients of $Na^+$ in a 1 M $NaClO_4$ solution are over 1 order of magnitude larger than those of $ClO{_4}^-$, and $ClO{_4}^-$ contribution to charge compensation decreases as dc potential lowers. The charge compensation of a PPy/Cl film ir a 1 M CsCl solution is carried out largely by $Cl^-$ at 0.2 V vs. Ag/AgCl and by $Cs^+$ as well as $Cl^-$ at -0.4 V.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.26 no.4
• /
• pp.42-49
• /
• 2003

The branch and bound techniques based on cut tree and eigenvector have been Introduced in the literature [1, 2, 3, 6, 9, 12]. These techniques are used as a basis to allocate departments to floors and then to fit departments with unchangeable dimensions into floors. Grouping algorithms to allocate departments to each floor are developed and branch and bound forms the basis of optimizing using the criteria of rectilinear distance. The proposed branch and bound technique, in theory, will provide the optimal solution on two dimensional layout. If the runs are time and/or node limited, the proposed method is a strong heuristic The technique is made further practical by the fact that the solution is constrained such that the rectangular shape dimensions length and width are fixed and a perfect fit is generated if a fit is possible. Computational results obtained by cut tree-based algorithm and eigenvector-based algorithm are shown when the number of floors are two or three and there is an elevator.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.4
• /
• pp.129-136
• /
• 2007

This paper considers the sequencing of products in mixed model assembly lines under Just-In-Time (JIT) systems. Under JIT systems, the most important goal for the sequencing problem is to keep a constant rate of usage every part used by the systems. The sequencing problem is solved using Genetic Algorithm Genetic Algorithm is a heuristic method which can provide a near optimal solution in real time. The performance of proposed technique is compared with existing heuristic methods in terms of solution quality. Various examples are presented and experimental results are reported to demonstrate the efficiency of the technique.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.04a
• /
• pp.3-10
• /
• 1997

Meshless particle method is a numerical technique which does not use the concept of element. This method can easily handle special engineering problems which cause difficulty in the use of finite element method, however it has a drawback that essential boundary condition is not satisfied. In this paper, several studies for satisfying essential boundary conditions and enhancing the accuracy of solutions are discussed. Particular emphasis is placed on a new numerical technique in which finite elements are used on the boundaries to satisfy the essential boundary conditions and meshless particle method is used in the interior domain. For coupling of the two methods interface elements are introduced into the zone between the subdomains using meshless particle method and finite element method. The shape functions and the approximated displacement functions of the interface element are derived with the ramp function based on the shape function of finite elements. The whole numerical procedures are formulated by Galerkin method. Several numerical examples for enhancing the accuracy of solution in the meshless particle method and a new coupling method are presented.